ADNOC Classification: Internal
PRODUCT DATA SHEET
ADNOC Hydraulic Oil H
DESCRIPTION
ADNOC Hydraulic Oil H is a series of hydraulic fluids formulated with high quality base oils and
special additives that provides, anti-wear, anti-corrosion, anti-rust and anti-oxidation
characteristics. They also deliver excelent air release and water separability properties and can
operate in a widely varying ambient temperatures.
APPLICATIONS
ADNOC Hydraulic Oil H is recommended for most types of hydraulic systems, moderately loaded
gears and bearing lubricated by circulation bath and ring oiling. It is available in a wide range of
viscosities to meet a variety of design and operating requirements of hydraulic systems of
construction, agricultural, industrial, marine and machinery tools equipment fitted with gear, vane
or piston pumps.
BENEFITS
Good oxidation resistance under the most severe working conditions
Load carrying and anti-wear properties protect pumps and other moving parts
Superior protection against corrosion and rust
Excellent resistance to foaming and air entrainment
Compatible with normal hydraulic sealing materials
Good hydrolytic stability means minimal degradation from contact with water and
good water separation characteristics
Excellent filterability
ADNOC Classification: Internal
PRODUCT DATA SHEET
PERFORMANCE LEVEL
Viscosity Grades
Specifications
10 15 22 32 37 46 68 100
AFNOR NF E 48 603 HM
ASTM D6158 Type HM X X X X
Fives Cincinnati P-68 X
Fives Cincinnati P-69 X
Fives Cincinnati P-70 X
Parker Hannifin (Denison) HF0, HF1 and HF2 X X X
DIN 51524 Part 2 (HLP) X X X X X
Eaton Brochure 03-401-2010 X X X
Eaton E-FDGN-TB002-E X X X
General Motors LS2 AW Hydraulic Oil
ISO 11158 Categories HM X X X X X
PRODUCT TYPICAL CHARACTERISTICS
Viscosity Grades
Properties Units Test Methods
10 15 22 32 37 46 68 100 150
Density @15°C kg/L 0.851 0.860 0.850 0.857 0.860 0.870 0.882 0.887 0.889 ASTM D1298
Kinematic Viscosity @40°C mm2/s 9.520 14.32 22.00 31.00 37.00 46.00 68.00 97.00 155.0 ASTM D445
Kinematic Viscosity @100°C mm2/s 2.590 3.320 4.300 5.250 5.850 6.750 8.700 11.00 15.20 ASTM D445
Viscosity Index - 102 101 98 98 98 98 98 98 96 ASTM D2270
Pour Point °C -39 -39 -33 -33 -30 -30 -27 -21 -21 ASTM D97
Flash Point, COC °C 164 184 200 214 220 220 230 240 240 ASTM D92
TAN mg KOH/g 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 ASTM D974
Minor variations in product typical test data are to be expected in normal manufacturing.
Always follow the Original Equipment Manufacturer's recommendation (OEM) for the equipment operating conditions, product specification, drain
interval and customer's maintenance practices.
Rev: 14-Nov-2022
