Technical Data Sheet

TECHNOMELT DORUS KS 351

Known as DORUS KS 351
June-2013

PRODUCT DESCRIPTION DIRECTIONS OF USE

TECHNOMELT DORUS KS 351 provides the following Preliminary Statement
product characteristics: Prior to application it is necessary to read the Material
Technology EVA Safety Data Sheet for information about precautionary
Product Type Unfilled Hotmelt measures and safety recommendations. Also, for chemical
Application Edgebanding products exempt from compulsory labeling, the relevant
Appearance Granules precautions should always be observed. Please also refer to
Transparent the local safety instructions and contact Henkel for analytical
White support.

Instructions for Use

Application Areas Working Temperature
● Edgebanding as from feedrates of 12 m/min Recommended working temperature:
throughfeed machines in the melting container, °C 180 to 200
● Edging material: solid wood, veneer, melamine, at the application roller, °C 190 to 200
polyester, HPL*, PVC*, ABS*, PP*
● Softforming even with difficult-to-bond profiles
● Suitable for processing centres (BAZ) with direct Safety
application Hotmelt adhesives give off vapours even when the specified
working temperature is not exceeded.The smells emitted
* Suitability depends on the individual characteristics of the may often cause irritation. When the specified temperatures
edging material and how it is primed. are considerably exceeded over a longer period of time,
there is the additional danger of decomposition products
being given off. Therefore measures to draw off the vapours
Product Properties
need to be taken, e.g. through the provision of extraction
● Medium viscosity equipment.
● Universal hotmelt adhesive
● Very good thermal resistance
● Produces tight joints virtually not visible
STORAGE
● Very high heat resistance Store in the original tightly closed container in a cool, dry
● High glue mileage place.
● Very good wetting
● Permits smooth surfaces even with very flexible edging Shelf life
materials Shelf-life (in unopened original packaging), years 2
● High final bond strength
Classification:
Technical Data Please refer to the corresponding safety data sheets for
TECHNOMELT DORUS KS 351: details on:
Softening Point, Ring & Ball, °C ~110 Hazardous Information
Transport Regulations
Viscosity, Brookfield - 180 °C, mPa.s ~140,000 Safety Regulations
Viscosity, Brookfield - 200 °C, mPa.s ~75,000

Heat Resistance, °C ~90

Tested with 0.6 mm oak veneer using
the Henkel method of increasing temperature
 TDS TECHNOMELT DORUS KS 351, June-2013

ADDITIONAL INFORMATION
Disclaimer
Note:
The information provided in this Technical Data Sheet (TDS) including the
recommendations for use and application of the product are based on our
knowledge and experience of the product as at the date of this TDS. The
product can have a variety of different applications as well as differing
application and working conditions in your environment that are beyond our
control. Henkel is, therefore, not liable for the suitability of our product for the
production processes and conditions in respect of which you use them, as well
as the intended applications and results. We strongly recommend that you
carry out your own prior trials to confirm such suitability of our product.
Any liability in respect of the information in the Technical Data Sheet or any
other written or oral recommendation(s) regarding the concerned product is
excluded, except if otherwise explicitly agreed and except in relation to death
or personal injury caused by our negligence and any liability under any
applicable mandatory product liability law.

In case products are delivered by Henkel Belgium NV, Henkel Electronic

Materials NV, Henkel Nederland BV, Henkel Technologies France SAS
and Henkel France SA please additionally note the following:
In case Henkel would be nevertheless held liable, on whatever legal ground,
Henkel’s liability will in no event exceed the amount of the concerned delivery.

In case products are delivered by Henkel Colombiana, S.A.S. the

following disclaimer is applicable:
The information provided in this Technical Data Sheet (TDS) including the
recommendations for use and application of the product are based on our
knowledge and experience of the product as at the date of this TDS. Henkel is,
therefore, not liable for the suitability of our product for the production
processes and conditions in respect of which you use them, as well as the
intended applications and results. We strongly recommend that you carry out
your own prior trials to confirm such suitability of our product.
Any liability in respect of the information in the Technical Data Sheet or any
other written or oral recommendation(s) regarding the concerned product is
excluded, except if otherwise explicitly agreed and except in relation to death
or personal injury caused by our negligence and any liability under any
applicable mandatory product liability law.

In case products are delivered by Henkel Corporation, Resin Technology

Group, Inc., or Henkel Canada Corporation, the following disclaimer is
applicable:
The data contained herein are furnished for information only and are believed
to be reliable. We cannot assume responsibility for the results obtained by
others over whose methods we have no control. It is the user's responsibility to
determine suitability for the user's purpose of any production methods
mentioned herein and to adopt such precautions as may be advisable for the
protection of property and of persons against any hazards that may be
involved in the handling and use thereof. In light of the foregoing, Henkel
Corporation specifically disclaims all warranties expressed or implied,
including warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Henkel Corporation’s products.
Henkel Corporation specifically disclaims any liability for consequential
or incidental damages of any kind, including lost profits. The discussion
herein of various processes or compositions is not to be interpreted as
representation that they are free from domination of patents owned by others
or as a license under any Henkel Corporation patents that may cover such
processes or compositions. We recommend that each prospective user test
his proposed application before repetitive use, using this data as a guide. This
product may be covered by one or more United States or foreign patents or
patent applications.

Trademark usage
Except as otherwise noted, all trademarks in this document are trademarks of
Henkel Corporation in the U.S. and elsewhere. ® denotes a trademark
registered in the U.S. Patent and Trademark Office.

Reference 0.0

Henkel AG & Co. KGaA Henkel Corporation Henkel (China) Co.Ltd.

73438 Bopfingen, Germany Bridgewater, NJ 08807, USA 201203 Shanghai, China
Phone: +49-7362-81-0 Phone: +1-908-685-7000 Phone: +86-21-2891-8000

For more information contact us on www.henkel.com