Quick Guide Evo 48 Paqradox PDF
Uploaded by
ScribdTranslationsQuick Guide Evo 48 Paqradox PDF
Uploaded by
ScribdTranslationsQuick Programming Guide EVO48
Programming Menu
Press and hold 0 until the panel indicates to enter the installer code (000000)
Once inside the programming, you will be asked to enter the number of the field you wish to modify.
this will be 4 digits and from now on we will show it in brackets; Example: [4005]
Reset the Modules on the data bus
Upon entering this field, the panel will scan for connected devices and remove them.
those who are no longer connected
In case you have connected more than 127 modules to your EVO48 panel at any time.
this field will organize all existing modules giving us more space.
Zone programming
[0400]
The following parameters are carried out
a) Zone number
b) Serial number and input number
c) Zone Parameters
(01)(*2***** )
d) Reporting codes
e) Zone labels
End-of-line resistance activation
Activate option 7 in field [3033]
Panic
3123 panic (1-6)
1 Police Panic On/Off
Medical Panic On/Off
3 Fire Panic On/Off
4 Police Panic Audible/Only report
5 Medical Panic Audible/Only report
6 Fire panic
System Times
Departure time
3108 Partition 1 (001 to 255 sec)
3208 Partition 2 (001 to 255 sg)
Entry time
Partition 1
3111 Entry time 1 (001 to 255 seconds)
3112 Entry time 2 (001 to 255 sec)
Partition 2
3211 Entry time 1 (001 to 255 sec)
3212 Entry time 2 (001 to 255 sec)
Departure Time
3108 Departure time partition 1
3208 departure time partition 2
Mermaid
3032 Activates or deactivates the siren for the partition (1-2)
3036 Option [8] Siren in communication failure
3124 Siren pulse partition 1 (1-6)
3224 Siren sound pulse partition 2 (1-6)
It emits two beeps when disarmed.
It emits a beep when armed
3 Emits a beep every second for 60 seconds before auto-arming the partition
4 Emits a beep every second during the exit delay
5 Emit a beep every second during the entry delay
It beeps once when armed and twice when disarmed when done with a remote control.
Option 3 Prevents arming if there is a problem with the siren
Functions with a single key
3125 A single key (1-6)
Quick activation feature option Button
[1] Regular Armed ARM
[2] Home Assembly STAY
[3] Instant Home Assembly (no output delay) 5
[4] Forced Armament FORCE
5 Unarmed in Home Mode DISARM
6 Cancellation of zones BYP
[7] Show events 7
3122 Auto-Assembly
Option [1] On/Off
Option [3] On/Off Auto-Arm Stay
3101 Timer of self-assembly
Remote controls
2940 Default template for remote control (00-15)
2900-2915 Remote control templates
2941 Assign template to user, select user (000-032), assign template (00-15)
The control is assigned to the user during the process of registering user codes.
To register the keychains to a user, you only need to press one of the buttons when the
the keyboard indicates it when registering the user codes.
Markup options
3036 Option [3] Marked On/Off
3071-3074 Teléfonos 1-4
3061 Account number partition 1
3062 Account number partition 2
3070 Communication format phone 1-4
1 Ademco Slow
2 Silent Knight Fast
3 Sescoa
4 Ademco Express
5 Pager
6 SIA FSK
7 Ademco Contact ID
4031 Put all reports in FF
NOTE.- Field 4031 must be activated for the panel to communicate.
Register wireless zones
To activate wireless areas, the following steps must be carried out.
The serial number of the wireless sensors must be registered within the RTX3 module.
to do this follow these steps:
1) Enter the programming mode of the panel and access field [4003], once inside.
from this field enter the serial number of your RTX3 receiver
Now you must access the field where the serial number of the sensor will be recorded.
this in the fields [101] to [132]
3) Exit the module programming using the DELETE key.
2) Now you will have to program the zone like any other, the only difference will be the number of
series which will correspond with that of the receiver, the input number will be the one provided in the
module programming, example: [101] =Input 001
Keyboard programming
4003 Device serial number
Within keyboard programming
Field 004
