Migration Solutions
Flame Detectors
Upgrade to
X-Series Detectors
Advance Protection and Lower Cost
OUR NEVER COMPROMISE ATTITUDE
Det-Tronics systems protect lives and valuable assets
around-the-clock globally. We are driven to improve
systems to reduce risk and advance protection.
Why upgrade? The latest generation products will:
▲ Meet or exceed current regulatory approval
requirements
▲ Reduce the total cost of operation
▲ Speed installation and maintenance tasks
▲ Enhance user experience and interaction
It's time to upgrade to a higher standard.
The X-Series Flame Detector Is an Advancement
Your local representatives can help you implement site-specific
solutions tailored to meet your change requirements. Contact
them today to begin the product migration process.
Compared to legacy products, the X-Series flame detectors:
Enhances performance
▲ Greater detection range
▲ Comprehensive onboard event logs
▲ Highly visible LED status indicator
▲ Better false alarm rejection capabilities
▲ More FM performance approved fire types
APPLICABLE LEGACY
PRODUCTS: Reduces maintenance costs
▲ Longer 3yr / 5yr warranty
▲ C705x controller based flame
▲ On-board FM approved Oi test (no test lamp needed)
detectors
▲ HART field communicator compatible
▲ U76xx unitized flame detectors
▲ Better weather protection
C705X LIFECYCLE
MANUFACTURED EARLY 1970 S –2011*
SUPPORTED EARLY 1970 S –2025*
* The C7050B high temp is currently available for purchase.
U76XX LIFECYCLE
MANUFACTURED LATE 1970 S –2003
SUPPORTED LATE 1970 S –2019*
* Select UV sensor modules will be available after 2019.
X-SERIES LIFECYCLE
MANUFACTURED 2002–FUTURE
SUPPORTED 2002–FUTURE
Upgrade Specifics
INSTALLATION REQUIREMENTS MAINTENANCE
Tools: Screwdriver, wrenches, drill, Service: Optics can be cleaned with
conduit seal isopropyl alcohol as needed
Time: 30 minutes per unit Parts: Spare sensor modules and
Power: The X-Series draws more output boards are available
power. Evaluate existing power and can be replaced without
supply to ensure it is capable of removing wiring or interfering
supplying the power the with aiming
applicable X-Series flame Functional Checks: As required by local regulations
detector requires Warranty: 3 years – X5200, X2200, X9800
Space: Mounting arm on the X-Series 5 years – X3301
is larger Aiming: Only required at startup
Communication: Pulse, Relay, 4-20ma, EQP, MAINTENANCE PLANNING
HART, Modbus
Spares Repairs
Wiring: If in good condition and
sufficient gauge, existing X-Series Yes Yes
wire can be used U76xx No No
Legacy UV Tubes Yes No
Legacy IR Tubes 2018 No
ACCESSORIES SUPPORT MATERIALS
007819-002: Inspector Connector
X-Series
006097-001: Laser Aimer 92-1068 Flame Brochure
007255-001: Laser Aimer Holder 77-1002 Detector Selection Guide
007290-002: Aluminum Mounting Hardware 76-1010 X-Series Optical Integrity (Oi)
007290-001: Stainless Steel Mounting 78-1027 X-Series Oi Test Magnet
Hardware X3301
90-1218 Enhanced Spec Sheet
007338-001: X-Series Weather Shield
95-8704 Enhanced Instruction Manual
102740-001: Magnet (one ships free
95-8736 Enhanced Pulse Instruction Manual
with each detector order)
X5200
007739-001: Magnet and Extension Pole 90-1156 Spec Sheet
103363-001: 14mm Hex Wrench 95-8546 Instruction Manual
103406-001: Screwdriver 95-8547 Pulse Instruction Manual
102991-001: Black Static Cap for Calibration X2200
001680-001: Window Cleaner (6 pack) 90-1157 Spec Sheet
95-8549 Instruction Manual
X9800
90-1160 Spec Sheet
VdS
95-8555 Instruction Manual
SUPPORT MATERIALS AVAILABLE AT:
WWW.DET-TRONICS.COM
The Global Leader in
Fire and Gas Safety Systems
Q UA L I T Y // PR OT EC T I O N // SO LU T I O N // F L E X I B L E // F U N C T I O N A L // R E L I A B L E // E X PE R I E N C E D // E N G I N E E R E D // A DVA N C E D
Additional Product Migrations:
KEY UPGRADE FACTS:
▲ Large, heated backlit display
▲ Onboard calibration logs
▲ Non-intrusive menu interface
▲ Easy install and legacy compatibility
LEGACY TX (U9500) FLEXVU ® UD10/UD20
DISPLAYS UNIVERSAL DISPLAYS
KEY UPGRADE FACTS:
▲ Easy to align—best in industry at
staying aligned
▲ Best in industry warranty
▲ Decreased maintenance costs
LEGACY (OPECL) FLEXSIGHT TM LS2000
LINE- OF-SIGHT DETECTORS LINE- OF-SIGHT DETECTORS
KEY UPGRADE FACTS:
▲ HART communication
▲ Onboard calibration logs and status LED
▲ Hot swappable replacement sensors
▲ One transmitter model for all gas types
LEGACY (C706X) GT3000* * The GT3000 Toxic Gas Detector is not available for sale in
TOXIC GAS DETECTORS TOXIC GAS DETECTORS the European Union (EU) and the United Kingdom (UK).
Learn more about these products at www.det-tronics.com or speak to your local representative.
92-1075 1.2 (A4)
Corporate Office Phone: +1 952.941.5665
6901 West 110 th Street Toll-free: +1 800.765.3473
Minneapolis, MN 55438 USA Fax: +1 952.829.8750
det-tronics.com
[email protected]©2020 Carrier. All Rights Reserved.
