FUNMAT PRO 610 HT installation instruction
Colin Fei
Ver 202105
Agenda
01 Site Preparation
Visual Check and
02 unpack the packaging
03 Power connection
04 Accessories obtaining
Remove XY axis fixation and
05 filling of coolant
06 Printing head cover installation
07 Calibration and Auto-leveling
9/23/2025 1
Agenda
01 Site Preparation
9/23/2025 2
Physical specification and space requirements
Size Weight
Printer 1710*1390*2080 mm 1450Kg
(With Light tower 1710*1390*2350mm)
With Box 1850*1450*2150 mm 1830Kg
Environmental Requirements
Operating Temperature 15~30°C
Operating Humidity 30%~70%
Storage Temperature -10°C~50°C
Input 3P 380V 30A/phase, 50~60Hz
Air Supply (external) 0.7Mpa, 100L/min, Ø10 Quick connector
Max. Power 17kW
Note: For indoor use only.
The Casters should be only used for short-distance transport
9/23/2025 3
Physical specification and space requirements
Recommended Tools: Unloading space requirements
• Forklift truck (load capacity ≥ 2,000kg) • Should be a level surface
• Stable ladder • Enough space for the forklift to remove the printer from the
• Electric drill delivery truck
• 8mm socket with adapter • Enough space required for unpacking the printer
• Knife
4450mm
1450mm 1450mm 1500mm
Forklift truck
9/23/2025 4
Physical specification and space requirements
3000 1350 800
1050 1350 300
800
300
1700
Maintaining Space
3300
2080
2600
500
800
Working Space Working Space
3500 3500
Note: All dimensions in mm
9/23/2025 5
Agenda
Visual Check and
02 unpack the packaging
9/23/2025 6
Visual Check
• The three recorders of this multi-angle tilting display • Anti-tilt label can show whether the goods are
label monitor and control the whole transportation tilted, horizontally or upside down in the
together, the copper beads in the first recorder show process of transportation or storage, and can
monitor whether the storage of goods
the true Angle of the product's tilt to the left, the
reasonably meets the storage requirements.
copper beads in the second recorder show the true Anti-tilt label can effectively prevent and reduce
Angle of the product's tilt to the right, and the copper the risk of damage of goods in the process of
beads in the third recorder indicate that the product transportation
has been completely reversed. The copper beads will • Induction type: environment-friendly blue
not return to their original position after moving. It is powder
an immutable all-directional tilting monitoring sticker 3rd recorder • Activation Angle: ≥40° tilt indication
• Note: The tilting indication label is affixed on the • Monitoring range: 360° inside and outside
outside of the packing box. Please pay attention to monitoring
acceptance before opening the box • Note: The tilting indication label is affixed on the
outside of the packing box. Please pay
attention to acceptance before opening the box
• Shockokee II 10G new shockproof label, impact intensity indicator. • Unpacking Confirmation Sheet
If the impact of the goods in the process of handling exceeds the • Please confirm the outer packing and
acceleration, the above or below display window becomes some indication labels and fill in the
conspicuous red, indicating that the goods in the process of unpacking confirmation form
handling by improper protection, the possibility of damage
increases, it is better to receive the goods on the spot out of the box
inspection.
• Operating temperature: -25℃~80℃
• Impact reaction time: 5-50ms
• Acceleration: 10g
• Note: The shockproof indicator label is affixed on the outside of the
packing box. Please pay attention to acceptance before opening the
box
9/23/2025 7
Unpacking the packages
• Step 1: Please remove the screws on the wooden box with an electric drill equipped
with 8mm sleeve. Remove all the boards and tapes, foams and packing films from
the machine.
• Step 2: Use forklift (load capacity ≥2,000Kg) to remove the equipment from the
wooden pallet. It should be placed on the flat ground before the printer being
moved to designated position. Please notice there is a warning light kit attached on
the wooden pallet, please keep it for further installation
• Step 3: Use forklift to move the equipment to the factory and place it in the
designated position.
• Step 4: After determining the position, hold up the four Forma wheel legs and fix the
equipment.
9/23/2025 8
Agenda
03 Power connection
9/23/2025 9
Power connection
• Pls click below “Play” icon to see the instruction video
Click on
“Play” icon
9/23/2025 10
Buttons explanations on control panel
DP. ON button
• Only in ON status, XYZ axis movement and heating
function can be activated
ON button
• To power on the printer
OFF button
• To power off the printer
AUTO/MANU switch key
• When in AUTO mode, front door can be opened only when in below conditions (chamber temp
<70°C and DP.ON button in off status)
• When in MANU mode, front door can be opened in anytime
• The key can be found in accessories box
• Make sure to turn DP.ON button “ON” when you want to move X/Y/Z axis or heat the chamber
Emergency Stop button
• Press the button to stop the printer when in emergency case
9/23/2025 11
Screen operation explanation
Status bar The screen operation is similar as
FUNMAT PRO 410 way
This is to activate/de-activate vacuum
absorption function
Navi
bar
This is to lock/unlock the front door
Display
area
9/23/2025 12
Agenda
04 Accessories obtaining
9/23/2025 13
Accessories obtaining
• Step 1: Open the front door (the security lock of the front door should be in the status of mechanical
unlocking), and take out the internal goods shipped with the equipment (warning light, printing head
cover, buildsheet, etc.).
• Step 2: install the warning light on the top right front of the printer. Before installation, plug the signal
wires properly. (See instruction video from below link)
• Step 3: Insert the plastic buildsheet (A transparent board and make sure to peel off the protection film in
both sides) on the buildplate.
Click on
“Play” icon
9/23/2025 14
Agenda
Remove XY axis fixation and
05 filling of coolant
9/23/2025 15
Remove XY axis fixation
• Step 1: Place the ladder to the left behind the
equipment, climb up the ladder, and lift up the rear top
cover
• Step 2: As shown in the illustration, a red fixing block
restricts the rotation of the XY shaft screw near the
motor end. Loosen the four M6 hexagon socket screws
to loose and remove the fixing block.
• Step 3: Keep the fixing block and screw, and use them
again in case the equipment will be moved in distance.
9/23/2025 16
Filling of coolant
• Step 1: Use a straight screwdriver to unscrew the cap at
the coolant nozzle (as shown in the figure below) and fill
the tank through the funnel.
• Step 2: When adding coolant, you can add purified
water or other clean antifreeze, adding liquid must
exceed the minimum liquid level line. In order to achieve
a better effect of the chiller, it is recommended to make
the liquid level as close to the highest liquid level line as
possible, with the maximum filling volume of about 1.8L.
• Step 3: Reset the cap after filling coolant
9/23/2025 17
Agenda
06 Printing head cover installation
9/23/2025 18
Printing head cover installation
• Pls click below “Play” icon to see the instruction video
Click on
“Play” icon
9/23/2025 19
Agenda
07 Calibration and Auto-leveling
9/23/2025 20
Calibration and Auto-leveling
• Pls click below “Play” icon to see the instruction video
Click on
“Play” icon
9/23/2025 21
9/23/2025 22
