1.
Familiarization with concept of IoT, Arduino/Raspberry Pi and perform necessary software
installation. Will be able to understand IoT, Arduino/Raspberry Pi, and also able to install
software setup of Arduino/ Raspberry Pi
2. To interface motor using relay with Arduino/Raspberry Pi and write a program to turn
ON/OFF motor. Able to use relay to control motor and other mechanical devices
3. To interface sensors* with Arduino/Raspberry Pi and write a program to display sensors
data on the computer screen. Able to retrieve data from sensors and to display it on
computer screen
4. To interface OLED with Arduino/Raspberry Pi and write a program to display sensor data
on it. Able to retrieve data from sensors and to display it on OLED
5. To interface sensor with Arduino/Raspberry Pi and write a program to turn ON/OFF Relay
when sensor data is detected. Able to control relay with help of microcontroller and
sensors
6. To interface sensor with Arduino/Raspberry Pi and write a program to turn ON/OFF
Solenoid valve when sensor data is detected. Able to control Solenoid valve with help of
microcontroller and sensors
7. To interface sensor with Arduino/Raspberry Pi and write a program to turn ON/OFF Linear
Actuator when sensor data is detected. Able to control linear actuator with help of
microcontroller and sensors.
8. To interface sensor with Arduino/Raspberry Pi and write a program to turn ON/OFF Starter
Motor when sensor data is detected. Able to control Starter Motor with help of
microcontroller and sensors
9. To interface Bluetooth with Arduino/Raspberry Pi and write a program to send sensor
data to smart phone using Bluetooth. Able to communicate sensor data from
microcontroller to smart phone
10. To interface Bluetooth with Arduino/Raspberry Pi and write a program to turn Actuators*
ON/OFF when message is received from smart phone using Bluetooth. Able to control
actuators using mobile phone through Bluetooth.
11. Write a program on Arduino/Raspberry Pi to Able to upload status of devices and The
students will be able to upload Sensor data to thingspeak cloud. sensors on web cloud.
12. Write a program on Arduino/Raspberry Pi to retrieve sensors data from thingspeak cloud.
Able to retrieve status of devices and sensors from web cloud
13. Develop IoT based smart lock system for Motor cycle/Car
14. Develop IoT based Smart water flow system Able to develop smart water flow system
15. Develop IoT based home security system
Components required‐
1. Arduino with cable2. Raspberry Pi with cable and memory card3. Node MCU
4. *Sensors‐IR, LDR, DHT11 sensor, Push button, Pressure senser, Temperature sensor, Vibration,
Rotation, Location, Torque, Sound, Weight etc.
5. *Actuators‐LED, Buzzer, Relay Switch, Motors, Motor Drivers, OLED, Display, Linear Actuator,
Solenoid Valve, Starter Motor etc.
6. Bluetooth Module, Wi‐fi Module, Ethernet Module
7. Smart Phone
8. Computer
9. Power Supply‐5V, 12V, 3.3V
10. Internet facility
