Important Questions (Besck104)
Uploaded by
fruitnamessImportant Questions (Besck104)
Uploaded by
fruitnamessIntroduction to Electronics BESCK104C/104
IMPORTANT QUESTIONS
MODULE1
a. Describe the DC power supply with the help of block diagram and explain the individual
blocks.
b. Draw the circuit diagram of voltage regulation and explain the operation.
c. With a neat circuit diagram and waveform. Explain the working operation of a full wave
bridge rectifier.
d. Describe the terms: Gain, input Resistance, Band width of Amplifier
e. Describe Half-wave rectifier with circuit diagrams and waveforms.
f. Classify different types of Amplifier.
g. Draw the circuit diagram of voltage doubler and the working operation
h. Discuss briefly a Negative feedback amplifier with block diagram.
i. An amplifier produces an output voltage of 2V for an input of 50 mV. If the input and
output currents are 4 mA and 200 mA respectively, determine
(i) The voltage gain (ii) The current gain (iii) The power gain.
MODULE2
a. What is oscillator? And mention condition for oscillations.
b. What are characteristics of an ideal operational amplifier
c. With circuit diagram, explain the operation of an wien bridge oscillator.
d. Define the following operational amplifier parameters value.
i) Open loop voltage gain
ii) Output Resistance
iii) Slew Rate.
e. Draw the circuit diagram and input and output waveform of the following operational
amplifier circuits
i. Differentiator ii. Integrator
f. Explain the single state astable oscillator with circuit diagram. Explain the single state
astable oscillator with circuit diagram.
g. Explain the operation of summing amplifier using operational amplifier and write the
output equation.
MODULE4
a. What is Embedded System? Compare Embedded System with General computing
system.
b. Explain element of an embedded system with the help of a block diagram.
c. Write a short note on - 7-segment LED display.
d. What is the difference between RISC and CISC processors?
e. Compare RISC and CISC processors.
f. Write a short note on i) Transducers ii) Sensors
g. Compare Microprocessors and Microcontrollers.
MODULE 5
a. Draw the block diagram of basic communication system and briefly explain the individual
blocks.
b. Discuss the types of communication systems.
c. What are advantages of Digital communication over Analog Communication.
d. Define Amplitude and Frequency modulation. Sketch AM and FM.
e. Write a short note on Amplitude Shift Keying (ASK) modulator and demodulator.
f. What are different types Radio Wave propagation. Describe each type in detail.
g. Describe various multiple access techniques used in communication systems.
MODULE3
1) Perform the following operations:
2) 1101-0101 using 2's complement method (ii) 0110-0010 using 2's complement method (i) 924 126
using 's complement method (iv) 265-424 using 10's complement method
3) Convert the following numbers to its equivalent numbers and show the steps.
i) (10110001101011.111100000)2 = (?)8
ii) (10110001101011.11110010)2 = (?)16
iii) (1010.011)2 = (?)10
4) Subtract the following using 10's complement
i) (72532-3250) 10 ii) (3250-72532)10
5) Implement full adder using two half adders and one OR gate. Write the
(1) equations for Sum and Cout
6) simplify the following expressions using Boolean algebra:
(1) (bar A)BC+AB(bar C)+AB
(2) A+BC+B
7) Express the Boolean function
i. F= A +(bar B)C in a sum of minterms form
ii. F = xy + (bar x)z in a product of maxterms form.
8) Design a Half Adder circuit with necessary logic diagram and expressions.
