https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by sales@ChinaStandards.

net

ICS 83.120
Q 23

National Standard of the People’s Republic of China

GB/T 2567-2008
Replaces GB/T 2567~2571-1995, GB/T 4726-1984 and GB/T 7194-1987
Partially replaces GB/T 8238-1987

Test Methods for Properties of Resin

Casting Body
树脂浇铸体性能试验方法

(English Translation)

Issue date: 2008-06-30 Implementation date: 2009-04-01

Issued by the General Administration of Quality Supervision, Inspection
and Quarantine of the People's Republic of China
the Standardization Administration of the People's Republic
of China

https://www.chinastandards.net/standard/GBT2567-2008.html
https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by [email protected]

Contents

Foreword ............................................................................................................................... I
1 Scope ............................................................................................................................. 1
2 Normative References ................................................................................................... 1
3 Standard Test Environment ............................................................................................ 1
4 Specimens...................................................................................................................... 1
5 Tests ............................................................................................................................... 4
6 Test Results .................................................................................................................. 25
7 Test Report ................................................................................................................... 26
Annex A (Normative) Graphical Method ......................................................................... 28

https://www.chinastandards.net/standard/GBT2567-2008.html
https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by [email protected]

Test Methods for Properties of Resin Casting Body

1 Scope

This standard specifies the standard test environment, specimen, test method, test result,
test report, etc. for determining the property of resin casting body.

This standard is applicable to the determination of the tension, compression, bending,

impact toughness of simply-supported beam, torsion, alkali resistance and refractive
index of casting bodies of thermosetting resin used for fiber reinforced plastics and
specially used for casting resin.

2 Normative References

The following standards contain provisions which, through reference in this standard,
constitute provisions of this standard. For dated references, subsequent amendments to
(excluding corrections to), or revisions of, any of these publications do not apply. However,
parties to agreements based on this standard are encouraged to investigate the possibility
of applying the latest editions of the normative documents indicated below. For undated
references, the latest edition of the normative document applies.

ISO 2602 Statistical Description of Test Results - Calculation of the Mean and
Confidence Interval

3 Standard Test Environment

Ambient temperature: (23±2)℃, relative humidity: (50±5)%.

4 Specimens

4.1 Specimen preparation

4.1.1 Mould

4.1.1.1 Plate casting mould

4.1.1.1.1 Materials

a) The formwork is flat and smooth glass plate or steel plate, and its size is determined
according to the specimen area and mould frame area;

b) Demoulding wax or cellophane, mould release agent or thin film is adopted

respectively;

https://www.chinastandards.net/standard/GBT2567-2008.html