Datasheet

Huawei OptiXstar V281s Datasheet 01

Main FTTR for Huawei iFTTR OptiXstar F50 Pro

Overview
Huawei OptiXstar V281s is a main FTTR for the Huawei iFTTR OptiXstar F50 Pro. It uses the XGS-PON and Wi-Fi 7
technologies to implement ultra-broadband access with high performance and wide coverage for users. The high forwarding
performance ensures the user experience in voice and data services, and provides users with an ideal all-optical access
solution and future-oriented service support capabilities.

⚫ Next-generation Wi-Fi 7 technology, featuring a higher rate and lower latency

⚫ Unique seamless roaming coordinate network (SRCN) technology, enabling imperceptible roaming in the whole house
⚫ C-WAN architecture, centrally controlling and coordinating network-wide Wi-Fi resources by the main FTTR to deliver ultra-
gigabit broadband experience in the whole house
⚫ One-touch connection1, NFC-based password-free access
⚫ IoT coffer, safeguarding home network security and privacy
⚫ Youth mode2 provided to safeguard Internet access by children
⚫ 360-degree coverage and beamforming by built-in smart antennas, ensuring IoT connection reliability
⚫ Vertically placed for less footprint

The figures in this document may differ from the actual products. The actual products prevail.

Huawei OptiXstar V281s Datasheet 01 1

Device Parameters
Dimensions (H x W 157 mm x 250 mm x 30 mm (excluding System power 12 V DC, 2 A
x D) the base) supply

Weight (without About 570 g Static power 11 W

power adapter) consumption

Installation mode Vertically placed on a desk or mounted Maximum power 23 W

on a wall consumption

Memory 256 MB Flash, 1 GB RAM NNI XGS-PON

Operating 0°C to +40°C UNI 1x2.5GE+3xGE+1xPOTS+1xUSB2.0

temperature *+2.4GHz&5GHz Wi-Fi+1xoptical
port+NFC

Operating humidity 5%to 95% RH, non-condensing Optical ⚫ NNI: SC/APC

connector ⚫ UNI: SC/APC

Power adapter input 100 V to 240 V AC, 50/60 Hz Indicator ⚫ Indicators on front panel
⚫ Indicators on rear panel:
PON/LOS/4-GE/3-GE/2-GE/1-
2.5GE/USB/TEL/WLAN/WPS/FT
TR

*: A plug-and-play USB port reserved for users.

Interface Parameters
XGS-PON port Wi-Fi

⚫ Class XGSN2 ⚫ IEEE 802.11 b/g/n/ax/be (2.4GHz)

⚫ Receiver sensitivity: -28 dBm ⚫ IEEE 802.11 a/n/ac/ax/be (5GHz)
⚫ Wavelengths: 1260–1280 nm upstream, 1575–1580 nm ⚫ 2×2 MIMO (2.4GHz&5GHz)
downstream ⚫ WMM(Wi-Fi Multi Media)
⚫ Upstream and downstream rate: 9.953 Gbit/s upstream, ⚫ 4096 QAM
9.953 Gbit/s downstream
⚫ 160 MHz bandwidth
⚫ Wavelength blocking filter (WBF)
⚫ WPA3/WPA2/WPA1
⚫ Flexible mapping between GEM Port and TCONT
⚫ MU-MIMO
⚫ SN/Password/SN+Password/Bi-directional authentication
⚫ MLO (Multi-Link Operation)
based on OMCI
⚫ Multi-RU
⚫ Upstream and downstream FEC
⚫ Multiple SSIDs
⚫ SR-DBA and NSR-DBA
⚫ WPS
⚫ Air interface rate: 688 Mbit/s(2.4GHz); 2882 Mbit/s(5GHz)

Ethernet port

⚫ Ethernet port-based VLAN tags and tag removal

⚫ 1:1 VLAN, N:1 VLAN, or VLAN transparent transmission
⚫ QinQ VLAN
⚫ Limit on the number of learned MAC addresses

Huawei OptiXstar V281s Datasheet 01 2

 ⚫ MAC address learning
⚫ GE port supports 10 Mbit/s, 100 Mbit/s and 1000 Mbit/s
auto-sensing
⚫ 2.5GE port supports 10 Mbit/s, 100 Mbit/s, 1000 Mbit/s
and 2500 Mbit/s auto-sensing

POTS port Downstream optical port

⚫ Maximum REN: 4 ⚫ P2MP optical port

⚫ G.711A/μ, G.729a/b, and G.722 encoding/decoding ⚫ Theoretic upstream rate: about 2.488 Gbit/s; theoretic
⚫ T.30/T.38/G.711 fax mode downstream rate: about 2.488 Gbit/s
⚫ Plug-and-play sub FTTR
⚫ DTMF
⚫ Emergency calls (with the SIP protocol) USB port

⚫ USB2.0
⚫ FTP-based network storage
⚫ File/Print sharing based on SAMBA
⚫ DLNA function

Product Function
Smart interconnection Smart O&M Multicast Layer 3 features

⚫ Smart Wi-Fi coverage ⚫ IPTV video quality ⚫ IGMP v2/v3 snooping ⚫ PPPoE/Static IP/DHCP
⚫ SIP/H.248 auto- diagnosis ⚫ IGMP v2/v3 proxy ⚫ NAT/NAPT
negotiation ⚫ Rogue ONT detection ⚫ MLD v1/v2 snooping ⚫ Port forwarding
⚫ Any port any service and isolation from the
⚫ ALG, UPnP
OLT
⚫ Parental control ⚫ DDNS/DNS server/DNS
⚫ WLAN simulation
client
⚫ PPPoE/DHCP simulation
⚫ IPv6/IPv4 dual stack, DS-
testing
Lite and IPv6 SPI
Security Common O&M QoS ⚫ Static/Default routes
⚫ SPI firewall ⚫ OMCI/Web UI/TR069 ⚫ Ethernet port rate ⚫ Multiple services on one
⚫ ⚫ limitation WAN port
Anti-DOS attack Variable-length OMCI
messages ⚫ 802.1p priority
⚫ Filtering based on Power saving
MAC/IP/URL addresses ⚫ Dual-system software ⚫ SP/WRR/SP+WRR
⚫ Indicator power saving
backup and rollback ⚫ Broadcast packet rate
⚫ TWT energy saving
limitation

Home network Home network management

⚫ Fiber to the room, implementing all-optical home Supports the following functions with NCE:
networking ⚫ Visualized home network management
⚫ C-WAN architecture, centrally controlling and ⚫ Remote management and maintenance
coordinating network-wide Wi-Fi resources by the main
⚫ Network management on a mobile app4
FTTR
⚫ Home Wi-Fi slicing and ONT cross-network acceleration − Installation guide
assurance − Visible home network topology
⚫ Intelligent Wi-Fi optimization for a home network − Wi-Fi settings
⚫ Seamless Wi-Fi roaming within a home network (SRCN − Timed Wi-Fi on/off
roaming technology, compatible with 802.11k/802.11v3) − Blacklist and parental control

Huawei OptiXstar V281s Datasheet 01 3

 − One-click network optimization
− One-click diagnosis and recovery

1. The device supports NFC. Android or HarmonyOS mobile phones or tablets that support NFC can connect to the Internet
with OneHop after NFC is enabled. Currently, iOS devices do not support the OneHop feature.
2. The youth mode needs to be used together with NCE and the user app.
3. The SRCN roaming technology is subject to the version provided by your operator. The 802.11k/802.11v technology must
also be supported by user terminals.
4. Huawei provides the basic mobile app SDK for operators. Operators can develop and customize apps based on the SDK
provided by Huawei.

Copyright © Huawei Technologies Co., Ltd. 2025. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and
Huawei Technologies Co., Ltd.
recommendations in this document are provided "AS IS" without warranties, guarantees or representations of
any kind, either express or implied. Address:Huawei Industrial Base Bantian,
Longgang Shenzhen 518129 People's
The information in this document is subject to change without notice. Every effort has been made in the
Republic of China
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied. Website:www.huawei.com

Huawei OptiXstar V281s Datasheet 01 4