https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by sales@ChinaStandards.

net

ICS 77.150.10
CCS H 61

National Standard of the People’s Republic of China

GB/T 6892-2023
Replaces GB/T 6892-2015

Wrought aluminium and aluminium

alloys extruded profiles for general
engineering
一般工业用铝及铝合金挤压型材

(English Translation)

Issue date: 2023-09-07 Implementation date: 2024-04-01

Issued by the State Administration for Market Regulation of the
People’s Republic of China
the Standardization Administration of the People's Republic
of China

https://www.chinastandards.net/standard/GBT6892-2023.html
https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by [email protected]

Contents

Foreword ............................................................................................................................... i
1 Scope ............................................................................................................................. 1
2 Normative references ..................................................................................................... 1
3 Terms and definitions ..................................................................................................... 2
4 Product classification ..................................................................................................... 3
5 Technical requirements ................................................................................................ 13
6 Test methods ................................................................................................................ 21
7 Inspection rules ............................................................................................................ 23
8 Marking, packaging, transportation, storage and quality certificate ............................ 29
9 Purchase order (or contract) information ..................................................................... 30
Annex A (Informative) Guidelines for selection of decorative and general protective film
........................................................................................................................................... 31
Annex B (Informative) Dimension measurement method - Trilinear coordinates
measuring instrument method ........................................................................................... 35
Annex C (Normative) Test method for pin-type bearing ................................................. 38
Annex D (Informative) Purchase order (or contract) contents ........................................ 47
Bibliography ....................................................................................................................... 56

https://www.chinastandards.net/standard/GBT6892-2023.html
https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by [email protected]

Wrought aluminium and aluminium alloys

extruded profiles for general engineering

1 Scope

This document specifies the product classification, technical requirements, test methods,
inspection rules, marking, packaging, transportation, storage, quality certificate, and
purchase order (or contract) information of wrought aluminium and aluminium alloys
extruded profiles for general engineering.

This document is applicable to wrought aluminium and aluminium alloys extruded profiles
for general engineering (hereinafter referred to as profiles).

2 Normative references

The following documents contain provisions which, through reference in this text,
constitute provisions of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.

GB/T 231.1 Metallic materials - Brinell hardness test - Part 1: Test method
GB/T 232 Metallic materials - Bend test
GB/T 3190 Wrought aluminium and aluminium alloy - Chemical composition
Wrought aluminium and aluminium alloy products - Packing marking
GB/T 3199
transporting and storing
Inspection method for structure of wrought aluminum and aluminum
GB/T 3246.1
alloy products - Part 1 : Inspection method for microstructure
Inspection method for structure of wrought aluminum and aluminum
GB/T 3246.2
alloy products - Part 2: Inspection method for macrostructure
GB/T 3251 Compression test method for aluminium and aluminium alloys tubes
Wrought aluminium alloy extruded profiles for architecture - Part 2:
GB/T 5237.2
Anodized profiles
Wrought aluminium alloy extruded profiles for architecture - Part 3:
GB/T 5237.3
Electrodeposition coating profiles
Wrought aluminium alloy extruded profiles for architecture - Part 4:
GB/T 5237.4
Powder coating profiles
Wrought aluminium alloy extruded profiles for architecture - Part 5 :
GB/T 5237.5
Paint coating profiles
GB/T 6398 Metallic materials - Fatigue testing - Fatigue crack growth method
Ultrasonic inspection of wrought aluminium and magnesium alloy
GB/T 6519
products
GB/T 7998-2023 Method for evaluating the susceptibility to intergranular corrosion of

https://www.chinastandards.net/standard/GBT6892-2023.html
https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by [email protected]

aluminum alloys
Optical emission spectrometric analysis method of aluminum and
GB/T 7999
aluminum alloys
Aluminium and aluminium alloy terms and definitions - Part 1:
GB/T 8005.1
Product and method of processing and treatment
GB/T 8013 Anodic oxide coatings and organic polymer coatings on aluminium
(All parts) and its alloys
Rules of rounding off for numerical values & expression and
GB/T 8170
judgment of limiting values
The methods for determining aluminium and aluminium alloys
GB/T 12966
conductivity using eddy current
Test methods for anodic oxidation coatings and organic polymer
GB/T 12967.3
coatings on aluminium and aluminium alloys - Part 3: Salt spray test
Tolerances on dimensions and form of aluminium and aluminium
GB/T 14846
alloy extruded profiles
Test pieces and method for tensile test for wrought aluminium and
GB/T 16865
magnesium alloys products
Methods for sampling for analyzing the chemical composition of
GB/T 17432
wrought aluminum and aluminum alloys
GB/T 20975
Methods for chemical analysis of aluminium and aluminium alloys
(All parts)
GB/T 22639 Test method of exfoliation corrosion for aluminium alloy products
Test method of C-ring sample to stress-corrosion cracking for
GB/T 22640
wrought aluminium and aluminium alloys products
Defects for wrought aluminium and aluminium alloys ingots and
GB/T 26492.5
products - Part 5: Defects for tubes, rods or bars, profiles, wires
Methods for evaluating the weld quality of seam welds in aluminium
GB/T 32790
and aluminium alloy extrusion
Shear testing method of aluminium alloy products for structural
GB/T 34487
members
Aluminium alloys extruded profiles-axial force controlled fatigue
GB/T 37616
testing method
GB/T 42914 Test method for fracture toughness of aluminium alloy products
GB/T 42916 Identification marking of aluminium and aluminium alloy products
JJG 475 Electronic universal testing machine
Aluminium alloy tubes, rods and profiles for aviation - Part 1: 7050
YS/T 1630.1-2023
aluminium alloy profiles
Specification and qualification of welding procedures for metallic
ISO 15614-2 materials - Welding procedure test - Part 2: Arc welding of aluminium
and its alloys
Friction stir welding – Aluminium - Part 4: Specification and
ISO 25239-4
qualification of welding procedures

3 Terms and definitions

https://www.chinastandards.net/standard/GBT6892-2023.html
https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by [email protected]

For the purposes of this document, the terms and definitions given in GB/T 8005.1 and
GB/T 26492.5 apply.

4 Product classification

4.1 Composition classification

Profiles are classified into Class I and Class II according to the composition, as shown in
Table 1.

Table 1 Composition classification

Class Class description Typical designation
Series 1×××, Series 3××× and Series 1060, 1350, 3003, 3103, 3A21, 5052, 5A02,
6××× alloy profiles and Series 5××× alloy 6101B, 6005, 6005A, 6105, 6106, 6013, 6351,
Class I
profiles with average magnesium limit 6060, 6061, 6063, 6063A, 6463, 6082, 6A02,
less than 4% 6A66
Series 2××× and Series 7××× alloy
2014, 2024, 2A11, 2A12, 5083, 5383, 5A05,
profiles and Series 5××× alloy profiles
Class II 5A06, 7003, 7005, 7020, 7022, 7075, 7A04,
with average magnesium limit not less
7A21, 7A41
than 4%

4.2 Designations, tempers, dimensions and specifications

The designations, tempers, dimensions and specifications of profiles shall meet those
specified in Table 2. When other designations, tempers, dimensions and specifications are
required by the purchaser, it shall be determined by the supplier and the purchaser
through negotiation according to the Registration Form for Status and Performance of
Deformed Aluminum and Aluminum Alloy Products, and shall be indicated in the purchase
order (or contract).

https://www.chinastandards.net/standard/GBT6892-2023.html