https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by sales@ChinaStandards.

net

ICS 29. 060. 10

K 120

NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
中华人民共和国国家标准
GB/T 7095.5-2008/IEC 60317-47:1997
Supersedes GB/T 7095.5-1995

Enamelled Rectangular Copper Winding Wires

— Part 5: Aromatic Polyimide Enamelled
Rectangular Copper wire, Class 240

漆包铜扁绕组线
第 5 部分：240 级芳族聚酰亚胺漆包铜扁线
(IEC 60317-47:1997, Specifications for Particular Types of Winding Wires —
Part 47: Aromatic Polyimide Enamelled Rectangular Copper Wire,
Class 240, IDT)

Issued on: June 13, 2008 Implemented on: March 1, 2009

Jointly Issued by the General Administration of Quality Supervision,

Inspection and Quarantine and the Standardization
Administration of the People's Republic of China

https://www.chinastandards.net/standard/GBT7095.5-2008.html
https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by [email protected]

Contents

Foreword ................................................................................................................................... II
1 Scope ................................................................................................................................... 1
2 Normative References ......................................................................................................... 1
3 Definitions, General Notes on Methods of Test and Appearance ........................................ 1
4 Dimensions .......................................................................................................................... 2
5 Electrical Resistance............................................................................................................ 2
6 Elongation ........................................................................................................................... 2
7 Springiness .......................................................................................................................... 2
8 Flexibility and Adherence.................................................................................................... 2
9 Heat Shock .......................................................................................................................... 2
10 Cut-through ....................................................................................................................... 2
11 Resistance to Abrasion....................................................................................................... 2
12 Resistance to Solvents ....................................................................................................... 2
13 Breakdown Voltage............................................................................................................ 2
14 Continuity of Insulation ..................................................................................................... 2
15 Temperature Index ............................................................................................................. 2
16 Resistance to Refrigerants ................................................................................................. 2
17 Solderability ...................................................................................................................... 2
18 Heat or Solvent Bonding ................................................................................................... 3
19 Dielectric Dissipation Factor ............................................................................................. 3
20 Resistance to Transformer Oil ........................................................................................... 3
21 Loss of Mass ...................................................................................................................... 3
23 Pinhole Test ....................................................................................................................... 3
30 Packaging ........................................................................................................................ 3

https://www.chinastandards.net/standard/GBT7095.5-2008.html
https://www.ChinaStandards.net -> Buy the full version pdf -> Delivered by [email protected]

General Requirement of Antibacterial and

Cleaning Function for Household and Similar
Electrical Appliances

1 Scope
This part of GB/T 7095 specifies the requirements of enamelled rectangular copper
winding wire of class 2401 with a sole coating of aromatic polyimide resin.
Class 240 is a thermal class that requires a minimum temperature index of 240 and heat
shock temperature of at least 260 ℃.
The temperature in degrees Celsius corresponding to the temperature index is not
necessarily that at which it is recommended that the wire be used, and this will depend on
many factors, including the type of equipment involved.
The range of nominal conductor dimensions covered by this standard is:
— Width: min. 2.0 mm max. 16.0 mm;
— Thickness: min. 0.80 mm max. 5.60 mm.
Wires of grade 1 and grade 2 are included in this specification and apply to the complete
range of conductors.
The specified combinations of width and thickness, as well as the specified width /
thickness ratio, are given in GB/T 7095.1-2008.

2 Normative References
The following normative documents contain provisions which, through reference in this
text, constitute provisions of this part of GB/T 7095. For dated references, subsequent
amendments to, or revisions of, any of these publications do not apply. However, parties to
agreements based on this part are encouraged to investigate the possibility of applying the
most recent editions of the normative documents indicated below. For undated references, the
latest edition of the normative document referred to applies.
GB/T 7095.1-2008 Enamelled Rectangular Copper Winding Wires — Part 1: General
Requirements (IEC 6031.7-0-2:2005, IDT)

3 Definitions, General Notes on Methods of Test and Appearance

3.1 Definitions and general notes on methods of test
For the purpose of this part of GB/T 7095, the definitions and general notes of Chapter 3
of GB/T 7095.1-2008 on methods of test apply.
In case of inconsistencies between GB/T 7095.1-2008 and this standard, this part shall
prevail.
3.2 Appearance
See Chapter 3 of GB/T 7095.1-2008

1
In some countries, such as Canada, U.S.A., Russia, this product is assigned a class 220.

https://www.chinastandards.net/standard/GBT7095.5-2008.html