PaniniMyVisionXUpgrade
Upgrade Instructions.doc
PaniniMyVisionXUpgrade
FromMyDemo FromUpgrader executable Slide3 Slide9
Upgrade Instructions.doc
PaniniMyVisionXUpgrade
FromMyDemo
Upgrade Instructions.doc
INFO: Provide the following information: MyVisionX S/N (read in the EEprom) Firmware, API , Driver and MyDemo release Identity Card (*) S/N and MyVisionX configuration NOTE: From INFO window its also possible to operate all the available software upgrades (increase in performance, OCR and barcode engines and so on)
(*)The ID card is a component that stores all MyVision X features and grants that the system runs as stated by licensing rights. The IDCard is mounted on a connector on the main board, and is clearly visible under the base plate area under the scanner.
Upgrade Instructions.doc
IDENTITYCARDUPGRADEPROCEDURE
IMPORTANT:toobtainanupgradelicencefrom Panini,theMyVisionXIdentitycardSerialNumber isrequired.IftheS/Nreportedinthelabelonthe bottomofthescannerortheS/Ninthetopofthe Scannerinfo aredifferentfromtheIdentityCard S/N,pleaseusethelastfortheupgraderequest
1) 2) 3)
SavetheMVX_53YYYZZ_IDCard.UpID file receivedfromPanini inyourdesktop UsingMyDemo,verifytheMyVisionXis workingproperly Clickon INFO buttoninMyVisionXSetUpand verifytheIdentityCardsS/Ncoincideswith theS/Nreportedinthefilename. Ifso,clickonUpgradeIDCard
Upgrade Instructions.doc
with your current IDCard configuration appear (60 dpm, no OCR engines in the example) Click on Load IDCard Upgrade file
4) A window
Upgrade Instructions.doc
5) Select and open the MVX_53YYYZZ_IDCard.U pID file
Upgrade Instructions.doc
AwindowwiththenewIDCardconfiguration(totheright)andtheoldIDCardconfiguration(totheleft)willappear. InourexampleweareincreasingtheperformancesoftheMyVisionXfrom60to90dpmandenablingthedeviceto readOCRA/B,OCRMICR,Barcode1DandBarcode2Dfonts 6)ClickonUpdateIDCard tochangethecontentoftheIdentityCard,amessageIDCardUpdated shouldappear 7)Clicktwiceon Exit,thencloseMyDemoandlaunchitagain.TheupgradedMyVisionXisreadytowork
Upgrade Instructions.doc
PaniniMyVisionXUpgrade
FromUpgradeExecutable
Upgrade Instructions.doc
Youwillneedtoobtainanupgradefilefrom PNA.
SupplyPNAwiththeserialnumberoftheunitto beupgraded. SupplyPNAwiththeupgradeinfo(whatupgrade doyouwant?) SupplyPNAwithanemailaddresstosendthe upgradefileto. SupplyPNAwithaPOfortheupgrade.
10
Upgrade Instructions.doc
10
OnceyoureceiveanemailwithafileattachedfromPNA copyittoyourdesktop.
ThefileshouldhaveanextensionofUpID Theserialnumberofthemachineandthenumbercontainedin thefilenamemustmatchortheupgradewillnotcomplete.
NextgotothePaniniFTPsiteanddownloadtheexecutable fileMVXUpgrader.exeandcopyittoyourdesktop.
Pleasegotohttp://downloads.paninina.com toaccessthe softwarefromyourbrowser.
LoginisUpgradeUtility Passwordisupgr@d3
Ifyouareunabletodownloadthisfilepleasecheckwithyour networkadministratoranmakesurethatyouhavetheproper rightsandthatexecutablesarenotbeingblocked.
11
Upgrade Instructions.doc
11
ExecutetheMVXUpgrader.exe,makesurethe MyVisionXisconnectedandnocapture applicationisrunning.
12
Upgrade Instructions.doc
12
ExecutetheUpgrader
Afterafewsecondsyou shouldhearthePanini devicepowerupand thenseethisscreen displayedonyour desktop. SelectOKandyouare finished.
13
Upgrade Instructions.doc
13
Iftheupgradefailspleaseconfirmthatyour PCisconnectedtothePaninideviceyou orderedtheupgradefor.
14
Upgrade Instructions.doc
14