3-TH-052
Datasheet: SD Memory Card Controller
AK2703ENLT
Version 01.00
Document Control Center
2016/10/5
ASOLID TECHNOLOGY CO., LTD.
7F.-1, No.83, Sec. 2, Gongdao 5th Rd., Hsinchu 300, Taiwan (R.O.C.)
Tel: +886-3-573-6032
Fax: +886-3-573-6300
3-TH-052Datasheet of SD Memory Card Controller AK2703ENLT Version 01.00
Contents
1. Foreword ........................................................................................................................................ 3
2. Statement of Scope ........................................................................................................................ 4
3. General Description ....................................................................................................................... 5
l
tia
3.1. Feature................................................................................................................................ 5
3.2. AK2703ENLT Function Block Diagram ........................................................................... 7
en
fid
on
C
id
ol
AS
7F.-1, No.83, Sec. 2, Gongdao 5th Rd., Hsinchu 300, Taiwan (R.O.C.) Tel:+886-3-573-6032 Fax: +886-3-573-6300
2/7
3-TH-052Datasheet of SD Memory Card Controller AK2703ENLT Version 01.00
1. Foreword
This document has been produced by ASolid Technology Co., Ltd., should the company
modifies the contents of this specification, it will be re-released with an identifying change of release
date and an increase in revision number as follows:
Revision mn.xy, where:
mn the first two digit are incremented for major changes of substance, e.g., functional changes.
l
xy the second two digits are incremented when minor changes have been incorporated into the
tia
specification, i.e., enhancements, corrections, updates, etc.
en
fid
on
C
id
ol
AS
7F.-1, No.83, Sec. 2, Gongdao 5th Rd., Hsinchu 300, Taiwan (R.O.C.) Tel:+886-3-573-6032 Fax: +886-3-573-6300
3/7
3-TH-052Datasheet of SD Memory Card Controller AK2703ENLT Version 01.00
2. Statement of Scope
This Data Book describes the main features and the applications of SD Memory Card Controller
AK2703ENLT. For more details, please contact [email protected] directly.
l
tia
en
fid
on
C
id
ol
AS
7F.-1, No.83, Sec. 2, Gongdao 5th Rd., Hsinchu 300, Taiwan (R.O.C.) Tel:+886-3-573-6032 Fax: +886-3-573-6300
4/7
3-TH-052Datasheet of SD Memory Card Controller AK2703ENLT Version 01.00
3. General Description
SD Memory Card Controller AK2703ENLT is the SD controller launched by ASolid
Technology Co., Ltd., which utilizes UMC process technology. AK2703ENLT is featured with
higher performance and lower power consumption, and supports SD1.01, SD1.10, SD2.02 and
SD3.01. The product is built in with single channel high speed flash interface with BCH error
correction code, supports all kinds of 2D and 3D NAND type flash including TLC, MLC and SLC.
l
3.1. Feature
tia
Fully compatible with SD Card standard specification v1.01/v1.1/v2.02/v3.01.
Support SPI mode.
en
Support Bus Speed Mode: Default Speed mode, High Speed mode, SDR12, SDR25,
SDR50, SDR104 and DDR50.
fid
Copyright Protection Mechanism-Complies with highest security of SDMI standard.
Support standard capacity SD memory card (<= 2GB).
Support SDHC capacity (4GB to 32GB).
on
Support SDXC capacity (32GB to 2TB).
Support SD command class 0, 2, 4, 5, 6, 7, 8 and 10.
Support password protection and built-in write protection features.
C
SD card interface with programmable output drive capability
Flash interface support:
id
UP to 2 flash chip selection and 8-bit flash IO access
Support both 1.8V and 3.3V flash for SD card
ol
Flash memory support:
Support ECC function to correct up to 7x-bits data errors per 1K bytes data automatically
AS
Support 2D and 3D SLC/MLC/TLC NAND type flash
Support flash with 2KB/4KB/8KB/16KB page architecture
Support four-plane operation
Support Toggle Mode flash
Support ONFI3.0/ONFI2.3/ONFI2.2/ONFI2.1/ONFI2.0 flash
Low power consumption
Enhanced ESD design
7F.-1, No.83, Sec. 2, Gongdao 5th Rd., Hsinchu 300, Taiwan (R.O.C.) Tel:+886-3-573-6032 Fax: +886-3-573-6300
5/7
3-TH-052Datasheet of SD Memory Card Controller AK2703ENLT Version 01.00
Non-Direct remap architecture
Manufacturing utility ready
l
tia
en
fid
on
C
id
ol
AS
7F.-1, No.83, Sec. 2, Gongdao 5th Rd., Hsinchu 300, Taiwan (R.O.C.) Tel:+886-3-573-6032 Fax: +886-3-573-6300
6/7
3-TH-052Datasheet of SD Memory Card Controller AK2703ENLT Version 01.00
3.2. AK2703ENLT Function Block Diagram
The following diagram is the internal block diagram of AK2703ENLT.
ROM RAM AK2703
ENLT
l
tia
Micro
processor
en
8 bit Flash
Memory
SD DMA/BUS Interface
SD Host interface controller with up to
controller fid 7x-bit
ECC
on
C
SD/MMC
id
NAND
Host
Flash
controller
ol
AS
Figure 4-1 AK2703ENLT Function Block Diagram
7F.-1, No.83, Sec. 2, Gongdao 5th Rd., Hsinchu 300, Taiwan (R.O.C.) Tel:+886-3-573-6032 Fax: +886-3-573-6300
7/7
