Product Data Sheet
Hempafloor Prime 420
(Formerly known as Strata Primer SF)
Product characteristics Product data
Description Product code
Hempafloor Prime 420 is a two-component solvent-free high build 25350
epoxy primer.
Product components
Recommended use Base 25359
Designed as a primer for all porous concrete surfaces. Help ensure Curing Agent 95035
adhesion between Hempafloor topcoats and the substrate.
Standard shade / code
Features Transparent 00000
- Good penetration properties.
- Low odour - can be applied in hygienic & food industries.
Gloss
- Easy to use and can be applied by brush or roller.
Glossy
- High mechanical properties.
Volume solids
100 ± 0%
Product safety
Specific gravity
1.1 kg/L [9 lb/US gal]
Flash point 124°C [255°F]
Reference dry film thickness
VOC content mixed product 100 micron [3.9 mils]
Legislation Value
EU 29 g/L [0.24 lb/US gal]
US (coatings) 29 g/L [0.24 lb/US gal]
Surface preparation
US (regulatory) 29 g/L [0.24 lb/US gal]
Cleanliness
Canada 29 g/L [0.24 lb/US gal] - Remove dust, loose material and any other contamination.
- The surface must be dry and clean prior to application.
China 29 g/L [0.24 lb/US gal] - Consult Hempel's separate Surface Preparation Guidelines for
more details.
Hong Kong 29 g/L [0.24 lb/US gal]
Korea 29 g/L [0.24 lb/US gal]
New build:
According to specific legislation, see details in the Explanatory Notes available - Remove dust, loose material and any other contamination.
at Hempel website, hempel.com or at your local Hempel website. - Concrete must cure completely; for 28 days minimum.
- Moisture content in the surface must be below 4%.
- Consult Hempel's separate Surface Preparation Guidelines for
Handling more details.
Handle with care. Before and during use, observe safety labels on
packaging and paint containers and follow all local and national safety
regulations. Always consult Hempel’s Safety Data Sheet for this Maintenance and Repair
product along with the Product Data Sheet. - Surface imperfections in the substrate must be fixed/filled before
paint application.
For professional use only. - Apply primer/sealer prior to application of filler.
- Moisture content in the surface must be below 4%.
- Consult Hempel's separate Surface Preparation Guidelines for
more details.
Issued by Hempel A/S - March 2023
1/4
Product Data Sheet
Hempafloor Prime 420
(Formerly known as Strata Primer SF)
Roughness Film thickness
- Consult Hempel's separate Surface Preparation Guidelines for
more details. Specification range Low High Recommended
100 micron 150 micron 100 micron
Dry film thickness
[3.9 mils] [5.9 mils] [3.9 mils]
Application Wet film thickness
100 micron
[4 mils]
150 micron
[6 mils]
100 micron
[4 mils]
Mixing ratio 10 m²/L 6.6 m²/L 10 m²/L
Theoretical spreading
Base 25359 : Curing Agent 95035 [410 sq ft/US [270 sq ft/US [410 sq ft/US
rate
(65 : 35 by volume) gal] gal] gal]
Product may be specified in another film thickness than indicated depending
The full content of each of the component must be used in the mixing
on purpose and area of use. This will alter spreading rate, drying and curing
process. Stir the Base (Part A) and continue stirring whilst adding all
time and overcoating interval. The practical consumption factor may vary
the contents of the curing agent (Part B) and mix until homogenous.
depending on application conditions, equipment and workmanship. It is vital
Before mixing the components, stir them individually to homogeneity.
that the specified minimum dry film thickness is uniformly achieved.
Do not open or mix the cans before the paint will be applied. Thinning
is not allowed.
Application conditions
- Surface temperature must be above 10°C [50°F] during application
Cleaner and curing.
Hempel's Tool Cleaner 99610
- Temperature of product must be above 15°C [59°F] during
application.
Pot life - Increased paint temperatures will significantly reduce the pot life.
- For application and curing at other conditions, please contact your
Product 10°C 20°C 40°C local Hempel representative.
temperature [50°F] [68°F] [104°F] - Provide adequate ventilation during application and drying.
Pot life 90 min 45 min 22 min
Relative Humidity:
- Relative humidity must be below 75% during curing.
Application method - Relative humidity must be below 75% during application.
Tool Application parameters Application remarks
Brush Not Applicable. - The practical consumption factor may vary depending on
application conditions, equipment and workmanship.
Short hair/ Epoxy Roller Not Applicable. - Consult Hempel's Application Guidelines and Instructions for more
details.
Thinning is not allowed. - The moisture vapor emission rate of concrete subfloor should be
tested as per ASTM F1869 or ASTM D4263
Drying and overcoating
Product compatibility
- Previous coat: None or according to Hempel’s specification.
- Subsequent coat: According to Hempel’s Specification. A selection
of approved topcoats is available. Consult Hempel representative
for information on approved topcoats.
Issued by Hempel A/S - March 2023
2/4
Product Data Sheet
Hempafloor Prime 420
(Formerly known as Strata Primer SF)
Drying time
Storage
Surface 20°C
temperature [68°F] Shelf life
Surface dry hours 6 Ambient 25°C
Through dry hours 24 temperature [77°F]
Dry to walk on hours 24 Base 24 months
Fully cured days 7 Curing Agent 24 months
Determined for dry film thickness 100 micron [3.9 mils] at standard conditions, Shelf life from date of production, when stored in original,
see Hempel’s Explanatory Notes for details. Any masking tape used during unopened containers. Thereafter, the product quality must be re-inspected.
paint application should be removed while the paint is still in the wet condition. Storage at elevated temperatures may reduce shelf life. For advice, please
consult Hempel.
Overcoating
Storage conditions
Hempel’s specification supersedes any guidelines indicated in the overcoating - Product must be stored according to local legislation, at maximum
table 40°C [104°F], without direct sunlight and protected from rain and
snow.
10°C 20°C 40°C - Temperature must not go below 10°C [50°F] during transport and
Quality name
[50°F] [68°F] [104°F] storage.
Atmospheric medium
Additional Certifications and Standards
Hempafloor Traffic Min 60 h 24 h 7h
Adhesion Strength tested according to ASTM D4541-09
520 Max 7½ d 72 h 22 h
Abrasion Resistance tested according to ASTM D4060-10
Hempafloor Traffic Min 60 h 24 h 7h
300 Max 7½ d 72 h 22 h
Hempafloor Self- Min 60 h 24 h 7h
level 200 Max 7½ d 72 h 22 h
Overcoating times are indicative for products of the same generic chemistry.
Consult Hempel’s specification for more information.
Drying conditions
- To obtain the drying time stated, it is important to maintain sufficient
ventilation during application, drying and curing.
- According to Hempel’s Specification.
Overcoating details
- According to Hempel’s Specification.
- Consult Hempel for specific details
Other remarks
- The surface must be clean before overcoating
- Epoxy coats have an inherent tendency of chalking in outdoor
exposure. This does not affect the performance of the coating.
Issued by Hempel A/S - March 2023
3/4
Product Data Sheet
Hempafloor Prime 420
(Formerly known as Strata Primer SF)
Additional documents
Additional information is available at the Hempel website
https://www.hempel.com/service-and-support/technical-guidelines
or at your local Hempel website:
- Explanatory Notes for Product Data Sheet.
- Application methods.
- Application Instruction for this product.
- General Application Guidelines
This Product Data Sheet (“PDS”) relates to the supplied product (“Product”) and is subject to updating from time-to-time. Accordingly, the buyer/applicator should have regard to the PDS supplied together
with the relevant batch of the Product (and not an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the following specifications, statements and/or guidelines as listed
below or as are available from the Hempel website under ‘Products’ at www.hempel.com (the “Additional documents”):
No. Document description Location/comments
1. Technical Statement One-off specific advice provided on request for specific projects
2. Specification Only issued for specific projects
3. PDS This document
4. Explanatory Notes to the PDS Available at www.hempel.com and contain relevant information about the Product testing parameters
5. Application Instruction Where available, at www.hempel.com
6. Generic technical guidelines (e.g. on application and surface preparation) Where available, at www.hempel.com
In the event of a conflict of information between the PDS and the Additional documents, the order of priority of information shall be in the order as set out above. In such event you should also contact your
representative at Hempel for clarification. Furthermore, the buyer/applicator must have full regard to the relevant Safety Data Sheet provided with each Product and which can also be downloaded from
www.hempel.com.
Hempel shall not be liable for defects where the application of the Product has not been made fully in accordance with the recommendations and requirements set out in the relevant PDS and the Additional
Documents. The information and terms of this disclaimer apply to this PDS, the Additional documents and any other documents supplied by Hempel in respect of the Product. In addition, the Product is
supplied and all technical assistance is given subject to Hempel’s General Conditions of Sale, Delivery and Service, unless otherwise expressly agreed in writing.
hempel.com Issued by Hempel A/S - March 2023
4/4
