0% found this document useful (0 votes)
25 views3 pages

01 Willi The Walrus - EN

The document provides a crochet pattern for creating 'Willi the Walrus,' including detailed instructions for making various parts such as the tail fin, nose, tusks, arms, paper boat, and hat. It specifies the materials needed, including different shades of Ricorumi yarn and tools like a crochet hook and embroidery needle. Additionally, it includes a copyright notice stating that reproduction of the pattern is restricted to noncommercial use only.

Uploaded by

Caroline
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
25 views3 pages

01 Willi The Walrus - EN

The document provides a crochet pattern for creating 'Willi the Walrus,' including detailed instructions for making various parts such as the tail fin, nose, tusks, arms, paper boat, and hat. It specifies the materials needed, including different shades of Ricorumi yarn and tools like a crochet hook and embroidery needle. Additionally, it includes a copyright notice stating that reproduction of the pattern is restricted to noncommercial use only.

Uploaded by

Caroline
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

The lovely world of

RICORUMI

„WILLI THE WALRUS“


designed by
maschenmaedle
„WILLI THE WALRUS“

TAIL FIN (MAKE 2) TO MAKE UP


Rnd 1: In grey, working into a magic ring, 4 dc. Use long end tails for sewing.
Work in a spiral in continuous rnds. Sew Tusks to the front of the Head, make sure the
Rnd 2: [1 dc, 2 dc into next st] 2 times. 6 sts. round side of the Body is at the top and the flat
Rnd 3: [1 dc, 2 dc into next st] 3 times. 9 sts. side at the bottom.
Rnds 4 – 6: 9 dc. In white, wind a length of yarn firmly round the
SIZE Rnd 7: [1 dc, dc2tog] 3 times. 6 dc. centre of the Nose as illustrated, pull end, so the
Approx 14 cm (5½ in) Fasten off, leaving a long tail. nose gets a dent in the middle.
Sew Nose to Face, just above the Tusks.
TOOLS AND MATERIALS NOSE Use black to embroider eyes and eyebrows.
Ricorumi dk Rnd 1: In beige, working into a magic ring, 6 dc. Sew Tail Fins to top and bottom of tail.
Shade 001 (white) 25 g Work in a spiral in continuous rnds. Sew Arms to top and bottom of Body as
Shade 002 (cream) 25 g Rnd 2: [1 dc, 2 dc into next st] 3 times. 9 sts. illustrated.
Shade 040 (teal) 25 g Rnds 3 – 6: 9 dc. Use black to embroider around contours of Paper
Shade 055 (beige) 25 g Rnd 7: [1 dc, dc2tog] 3 times. 6 dc. Boat as illustrated.
Shade 079 (grey) 25 g Fasten off, leaving a long tail. Thread end tail back and forth through the long
Shade 060 (black) yarn remnant edge of the brim and the Hat. Pull tight to make
Rico crochet hook 3 mm TUSK (MAKE 2) the hat shape. Sew short ends together and fold
Rico embroidery needle In cream, make 5 ch + 1 t-ch, turn. brim to outside as illustrated.
Rico synthetic stuffing Row 1: 1 sl st into 2nd ch from hook, 1 sl st, 3 dc. Sew Hat to Head.
Rico stitch marker 5 sts.
Fasten off, leaving a long tail. ABBREVIATIONS (UK
TERMINOLOGY)
TENSION approx approximately
20 sts and 20 rows on 3 mm hook over dc ARMS (MAKE 2) beg beginning
= 10 cm x 10 cm. Rnd 1: In grey, working into a magic ring, 6 dc. BLO back loop only
Work in a spiral in continuous rnds. ch chain
HEAD AND BODY Rnds 2 – 6: 6 dc. cont continue
Rnd 1: In grey, working into a magic ring, 6 dc. Fasten off, leaving a long tail. dc double crochet
Work in a spiral in continuous rnds. dc2tog work 2 double crochet sts
Rnd 2: [2 dc into next st] 6 times. 12 sts. PAPER BOAT together to decrease
Rnd 3: [1 dc, 2 dc into next st] 3 times, In cream, make 4 ch + 1 t-ch, turn. FLO front loop only
[2 dc into next st] 6 times. 21 sts. Row 1: 1 dc into 2nd ch from hook, 2 dc, htr half treble crochet
Rnd 4: [2 dc, 2 dc into next st] 3 times, 2 dc into next ch, 1 ch, turn. 5 sts. in inch
[1 dc, 2 dc into next st] 6 times. 30 sts. Row 2: 4 dc, 2 dc into next st, 1 ch, turn. 6 sts. rem remaining
Rnds 5: [3 dc, 2 dc into next st] 3 times, Row 3: 5 dc, 2 dc into next st, 1 ch, turn. 7 sts. rnd round
[2 dc, 2 dc into next st] 6 times. 39 sts. Row 4: 6 dc, 2 dc into next st, 1 ch, turn. 8 sts. sl st slip stitch
Rnd 6 - 13: 39 dc. Row 5: 7 dc, 2 dc into next st, 1 ch, turn. 9 sts. st(s) stitch(es)
Rnd 14: 15 dc, [2 dc, dc2tog] 6 times. 33 sts. Fasten off, leaving a long tail.
Rnd 15: 15 dc, [1 dc, dc2tog] 6 times. 27 sts. Re-join yarn to 3rd st on the right.
Change to teal and work 10 rows in the following Row 1: BLO, 5 dc in same st, turn. 5 dc.
stripe sequence: 1 row in teal, 1 row in white Row 2: Miss 1 st, 4 dc, turn. 4 sts.
alternately. Row 3: Miss 1 st, 3 dc, turn. 3 sts.
Rnds 16 – 17: 27 dc. Row 4: Miss 1 st, 2 dc, turn. 2 sts.
Fill with stuffing as you go along. Row 5: Miss 1 st, 1 dc. 1 st.
Rnd 18: [8 dc, dc2tog] 2 times, 5 dc, dc2tog. Fasten off and weave in tail.
24 sts.
Rnd 19: 24 sts. HAT
Rnd 20: [10 dc, dc2tog] 2 times. 22 sts. In teal make 8 ch + 2 t-ch, turn.
Rnd 21: [9 dc, dc2tog] 2 times. 20 sts. Row 1: 1 htr into 3rd ch from hook, 7 htr, turn.
Rnd 22: 3 dc, dc2tog, 8 dc, dc2tog, 5 dc. 18 sts. 8 sts.
Rnd 23: [7 dc, dc2tog] 2 times. 16 sts. Row 2: 1 ch, FLO, 8 htr, turn.
Rnd 24: 3 dc, dc2tog, 6 dc, dc2tog, 3 dc. 14 sts. Row 3: 1 ch, BLO, 8 htr, turn.
Rnd 25: [5 dc, dc2tog] 2 times. 12 sts. Rep rows 2 – 3 8 times, then row 2 again.
Change to grey. Fasten off, leaving a long tail.
Rnd 26: 2 dc, dc2tog, 4 dc, dc2tog, 2 dc. 10 sts.
Rnd 27: [3 dc, dc2tog] 2 times. 8 sts.
Fasten off, leaving a long tail.
Use long tail to sew opening closed.
„WILLI THE WALRUS“

Rico Design GmbH & Co. KG Rico Design Ltd. Warning: Reproduction of this pattern
Industriestrasse 19 – 23 71 –  75 Shelton Street is protected by copyright. It is sold on
33034 Brakel / Germany / EU London WC2H 9JQ / UK the condition that it is only used for
[email protected] / www.rico-design.com noncommercial purposes. All other rights
reserved by © Rico Design GmbH & Co. KG.

You might also like