IMPORTING FILES FROM EXCEL

Total Station SOKKIA SERIES CX-100, Guide Prepared by CORPOGEO SAC

This Guide Prepared by CORPOGEO S.A.C. offers its clients a way

Quick guide for the proper use and handling of the Total Station Series CX-100, Check the configuration
regional of your computer in the option MY PC, Control Panel, Regional Settings and
a Check in customize and should look like shown in the following figure.

CUSTOMIZE

PUNTO

COMA

COMA

Generate a file in Excel as shown in the following figure, if you want it with
descriptions there is no problem to upload it to the software.

** This material is intellectual property of Corporación Geomatica S.A.C. **

Copying or reproducing it, in whole or in part, is prohibited.

Av. Del Parque Sur No. 185 Of. 404–San Isidro–Lima–Peru

Tel: 01 224-1348 / E-mail: [email protected]
UNIQUE AUTHORIZED DISTRIBUTOR FOR PERU OF:
 Then proceed to Save As (File–Save As will appear)
new screen and there select in file type the option CSV (Comma delimited). And
Save it with any name. And acceptSAVE.

FILE
GUARDAR COMO

TYPE OF
FILE GUARDAR
ONLY ONE
SHEET

Excel will inform you that the file may have features not compatible with
CSV or if you want to maintain the format of the book?
Yes
And proceed to close the Excel program and you can answer NO to the question that he
does.
Open the Spectrumlink program, go to the FILE option, and OPEN FILE, then locate the path and the
file name I save, it can be in format name the option All Files
the files to have more search options). Locate it and open the fileOPEN.

OPTION
FILE

FILE
SAVED

OPEN

** This material is intellectual property of Corporación Geomatica S.A.C. **

Total or partial copying or reproduction is prohibited

Av. Del Parque Sur N° 185 Of. 404–San Isidro–lima–Perú

Tel: 01 224-1348 / E-mail: [email protected]
UNIQUE AUTHORIZED DISTRIBUTOR FOR PERU OF:
 The file will be uploaded in the Spectrum link software as shown in the figure, already
from there you can save it as (Save As) and save it with the extension *.xyz as indicated in the
quick guide, with a name and said extension.

And as you can see in the figure below, always in the extension *xyzpara
to export the file to the total station. (After saving it to the USB (topcon)).

WHEN CLICKING HERE, IT WILL APPEAR

ALL THE EXTENSIONS,

CHOOSE *.XYZ.

GIVE NAME
TO THE FILE

SAVE

By this moment, we already have the file loaded onto the USB Memory ready, it's our turn
Go now to the Total Station to load the said file.

** This material is the intellectual property of Corporacion Geomatica S.A.C. **

Copying or reproduction, in whole or in part, is prohibited.

Av. Del Parque Sur No. 185 Of. 404–San Isidro–Lima–Peru

Tel: 01 224-1348 / E-mail: [email protected]
UNIQUE AUTHORIZED DISTRIBUTOR FOR PERU OF:
 Para realizar esta exportación de datos procesados debemos como primer paso se
You must create a new file where the new points to be replanned will be installed, then
we inserted or installed the USB memory (SOKKIA) into the device.

Procedure:
We press the ESC key. To access the presentation screen, while being in
we access this screen to the optionDATA (F3). And here we selectWORK
(Job=JOB) and we press Enter. In this screen we select the option select
WORK(enter), and through LIST (F1). We select a JOB (in select. Work as in
Search coord. We can choose from the ten types of jobs that are available.
It is recommended that both jobs are the same) then they will enter and exit.

MED CP 0 CX-105 reg 9925

PPm 0 7ABC 8DEF 9GHI N/S GS3095
G-0 Ver.2.56U1_00
AZ 99°07'03"
4JKL 5MN 6PQR
1.03_01
HA-D 153°22'07" P1 1STU 2VW 3YZ! Tra.CORPOGEO
MED GHV AZ-0 TOP 0/_& .*?$ +#% OBS USB DATA CONFIG
F1 F2 F3 F4 F1 F2 F3 F4
ENT
ESC B.S. SHIFT FUNC ESC B.S. SHIFT FUNC

Date WORK Select. WORK

WORK Select WORK JOB1
Known Data Details of WORK Search Coord. WORK
Code. Delete WORK BB:JOB9
Communication Output.
Config.Communic. LIST
F1 F2 F3 F4 F1 F2 F3 F4 F1 F2 F3 F4
ENT
ENT
ESC B.S. SHIFT FUNC ESC B.S. SHIFT FUNC ESC B.S. SHIFT FUNC

We select job details and enter the job name, for example
CORPOGEO SAC, and we confirm with OK. Then it automatically returns to the screen.
before we pressed ESC.

Select. WORK WORK Details of WORK

JOB1 Select JOB Name. TRA A
Search Coord. WORK Details of WORK CORPOGEO SAC
BB:JOB1 Delete WORK .
Communication Output. ESCAL:1.00000000
LIST Config.Communication. OK
F1 F2 F3 F4 F1 F2 F3 F4 F1 F2 F3 F4
ENT
ESC B.S. SHIFT FUNC ESC B.S. SHIFT FUNC ESC B.S. SHIFT FUNC

Created the project pulsamosEsc. Until reaching the presentation screen.

** This material is the intellectual property of Corporación Geomatica S.A.C. **

The total or partial copying or reproduction is prohibited.

Av. Del Parque Sur No. 185 Of. 404–San Isidro–Lima–Peru

Tel: 01 224-1348 / E-mail: [email protected]
UNIQUE AUTHORIZED DISTRIBUTOR FOR PERU OF:
 We press the ESC key. To access the presentation screen, we will enter
to the USB option, pressing F2 (USB).

CX-105 reg 9925 CX-105 reg 9925

N/S GS3095 N/S GS3095
Ver.2.56U1_00 Ver.2.56U1_00
1.03_01 1.03_01
Tra.CORPOGEO SAC Tra.CORPOGEO SAC
OBS USB DATA CONFIG OBS USB DATA CONFIG
F1 F2 F3 F4 F1 F2 F3 F4

ESC B.S. SHIFT FUNC ESC B.S. SHIFT FUNC

Then we select the transmission type and press ENTER, it will appear.
screenUSBy we select Load Pto. Known. We press ENTER, the team gives us
Display on the screen the file where we are going to load the data, then press OK (F4).

USB USB Load Pto.Conoc

Type T Save Data
type S Load Pto.Conoc Tra.geocorp sac
Save code
Load code
Status of the record. ▼ OK
ENT ENT
F1 F2 F3 F4 F1 F2 F3 F4 F1 F2 F3 F4

ESC B.S. SHIFT FUNC ESC B.S. SHIFT FUNC ESC B.S. SHIFT FUNC

Then we select GTS (Coord.) press ENTER and choose the file to
load(teodoro.XYZ).

Load Pto.Conoc
GTS(Coord) JOB1 raw
SSS(Coord) Theodore xyz
JOB3 xyz
JOB4 raw
ENT ENT
F1 F2 F3 F4 F1 F2 F3 F4

ESC B.S. SHIFT FUNC ESC B.S. SHIFT FUNC

We give ENTRY and confirm (F4) the file will start to load, then it will exit the
we go to the replanning screen and proceed to carry out
the procedure for redefining the points.

THEO xyz USB

1904byte Guardar Datos
oct/24/13 10.37 Load Known Port
Format: SDR (Coord) Save code
Confirm? Load code
NO YES Record status.
F1 F2 F3 F4 F1 F2 F3 F4

ESC B.S. SHIFT FUNC ESC B.S. SHIFT FUNC

** This material is the intellectual property of Corporación Geomatica S.A.C. **

Copying or reproduction, in whole or in part, is prohibited.

Av. Del Parque Sur N° 185 Of. 404–San Isidro–Lima–Peru

Tel: 01 224-1348 / E-mail: [email protected]
UNIQUE AUTHORIZED DISTRIBUTOR FOR PERU OF: