Scribd
Upload
8 views1 page

Calibration Leser Distance Meter

This document is a calibration certificate issued to K.R. Bedmutha Techno Associates Pvt. Ltd. for a laser distance meter, detailing the calibration date, results, and environmental conditions. The calibration was performed on December 23, 2024, with a recommended due date of December 22, 2025, and the results indicate no errors for most measurements. The certificate is intended for industrial and scientific purposes only and cannot be used in legal matters.

Uploaded by

TESTING ENGINEERS & ASSOCIATES PUNE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views1 page

Calibration Leser Distance Meter

This document is a calibration certificate issued to K.R. Bedmutha Techno Associates Pvt. Ltd. for a laser distance meter, detailing the calibration date, results, and environmental conditions. The calibration was performed on December 23, 2024, with a recommended due date of December 22, 2025, and the results indicate no errors for most measurements. The certificate is intended for industrial and scientific purposes only and cannot be used in legal matters.

Uploaded by

TESTING ENGINEERS & ASSOCIATES PUNE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SK ENGINEERING AND CALIBRATION

SERVICES

Calibration Certificate
Name & Address of Client Certificate No. 2404814
Date of Issue 27.12.2024
K.R. Bedmutha Techno Associates Pvt. Ltd. Date of Calibration 23.12.2024
A2A-120, Janakpuri, New Delhi-110058 Recommended Due Date 22.12.2025
Service Request No. & Date 231224/01
Page No. 1 of 1
--- ---
Instrument Detail
Instrument/Parameter Name LASER DISTANCE METER Range/Size 0-40000 mm
Equipment/Machine --- Least Count/Resolution ---
Equipment Location --- Accuracy/Acceptance Criteria ---
Make/Model No. Precise / LDM-40 Calibrated At Lab
Sr. No. --- Condition at Receipt of Item OK
ID No. LDM-01 --- ---
Master Equipment used for Calibration (Traceable to National/International Standards)
Sr. Instrument Name ID/Sr. No. Certificate No. Calibrated By Due Date
No.
1 Caliper Checker With Metric SKECS/MI-02 N/070524/4/2 Modtech Creative (CC-2105) 06.05.2026
Steel Tape
Environmental Condition Temperature (°C) 20±02 Relative Humidity (%RH) 50±10
Calibration Method IS 1481:1970, CP(ME)-20
Calibration Results
Uncertainty of Measurement
Sr. Values of DUC Values of STD ERROR
(k =2) (±)
No.
mm mm mm mm
1 50 50 0
2 100 100 0
3 500 500 0
4 1000 1000 0
5 2000 2000 0
1.50
6 5000 5000 0
7 10001 10000 1
8 19999 20000 -1
9 30001 30000 1
10 40001 40000 1

Remarks: ---
Abbreviations: DUC-Device Under Calibration, STD-Standard Equipment.
Notes: 1. The reported expanded uncertainty of measurement was evaluated at a confidence-level of 95% with coverage factor, k=2 for a
normal probability distribution.
2. The certificate refers only to the particular item submitted for calibration.
3. Results reported are valid at time of and under stated condition of measurement.
4. The certificate shall not be reproduced except in full without permission of head of laboratory.
5. This certificate is for industrial and scientific purpose only and cannot be used in legal matters.
**End of Certificate**

Reviewed & Authorized By


Sunil Sharma
Format No.: SKECS/QF/35, Rev.-03, Rev. Date-07.02.2024

543, Main Road, Near Gohana Railway Line, Mo. 9416663413, 9996373733
Raj Nagar, Panipat-132103 (Hr.) Email: [email protected]

You might also like