User Guide

HW-LS60D
To receive more complete service, please register your product at
www.samsung.com/register
Figures and illustrations in this User Guide are provided for
reference only and may differ from the actual product appearance.
Product design and specifications may change without notice.

© 2024 Samsung Electronics Co., Ltd. All rights reserved.

CONTENTS
01 Checking the Components 3 10 Software Update 19
Auto Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
02 Assembling Music Frame 3 USB Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Attaching the Photo Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Security updates information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing the photo from the Photo Frame . . . . . . . . . . . . . . . . . . 4

Inserting an Art Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 11 Troubleshooting 20

03 Product Overview 6 12 License 21

Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Rear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

04 Connecting Electrical Power 7

05 Connecting a Mobile Device 7

Method 1. Connecting the SmartThings App
(Wireless Network) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Using Group Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Using the SmartThings Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connecting via Apple AirPlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Method 2. Connecting via Bluetooth . . . . . . . . . . . . . . . . . . . . . . . 10

Using the Tap Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

06 Connecting to a TV 12
Connecting via Wi-Fi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Connecting to a TV that supports Dolby Atmos . . . . . . . . . . . . . . 12

Using the Q-Symphony Function . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connecting via Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connecting using an Optical Cable . . . . . . . . . . . . . . . . . . . . . . . . . 14

Using the Spacefit sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

07 Connecting an External Device 15

Connecting using an Optical Cable . . . . . . . . . . . . . . . . . . . . . . . . . 15

08 Additional Features 16
Adjusting the Wireless Speaker volume with a TV remote
control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Activate/Deactivate Wi-Fi and Bluetooth . . . . . . . . . . . . . . . . . . . 16

09 Installing the Wall Mount 17

Installation Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Wallmount Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

ENG - 2
01 CHECKING THE 02 ASSEMBLING MUSIC
COMPONENTS FRAME
Attaching the Stand

Wireless Speaker AC/DC Adapter Power Cord

main unit

x2

1.
(M5 X L55)

Photo Frame Stand Screw

x1
x2 x1

Anchor Holder-Screw Bracket-Wall Rear

x2 x4 x1 2.

Spacer Holder-Plate Holder-Guide

Wall Mount Guide

• For more information about the power supply and power 3.

consumption, refer to the label attached to the product.
(Label: Rear of the Wireless Speaker Main Unit)
• To purchase additional components or optional cables, contact a
Samsung Service Center or Samsung Customer Care.
• For more information about the wallmount or rubber-foot, see
pages 17~18.
• The appearance of the accessories may differ slightly from the
illustrations above.

4.

ENG - 3
 Changing the photo from the Photo Frame
You can change the picture anytime you want. (Size: 20x25 cm)
1. Press one of the marked positions with your finger to remove the
cover.

2. Slide out the old photo and insert a new one.

Photo

Attaching the Photo Frame

3. Close the cover and press the four locking tabs to lock.

• Be sure to secure the photo frame properly. Otherwise, it may fall

off and cause damage or physical injury. Any accident resulting
from carelessness by the user shall not be covered by the warranty.

Detaching the Photo Frame

ENG - 4
Inserting an Art Panel Use the Holder-Guide (H) to attach the Holder-Plate (G) in every
corner of the art panel.
You can insert an art panel (not included) into the music frame.
• panel size: 330.0 mm x 330.0 mm x 5.0 mm 1.
• The art panel is available on the Marpple online shop (H)
(https://www.marpple.com/musicframe), and the availability Art Panel
may differ with your region. For regional retailers, visit your local (sold separately)
Samsung web site (www.samsung.com).
• Distribution of the art panel is performed by third-part businesses
that has nothing to do with the company. And the panel’s quality
and safety is solely subject to the third-party businesses. Regional 2.
retailers may change depending on their business situation. x4

CAUTION (G)
• Attach the plate (G) on a site
without scratches or impurities.
Otherwise, the plate (G) may 3.
fall off.
• Make sure you secure the plate
(G)
(G) firmly.
• Use the acrylic Diasec panel
only. Other panels may have
the risk of detaching the holder,
which leads to the panel falling 4.
off. Any accident regarding
improper material shall not be
covered by the warranty.

x4 x1

(G) (H) Art Panel (sold

separately)

ENG - 5
03 PRODUCT OVERVIEW Rear

Front

D.IN SMARTTHINGS
(OPTICAL) DONGLE DC 19V

1 D. IN Connect to the digital (optical) output of an

(OPTICAL) external device. (See page 14)

SMARTTHINGS Connect the SmartThings dongle (Purchase

1 LED indicator DONGLE separately) to use the SmartThings Hub
The LED Indicator flashes, glows, or changes color function.
depending on the Wireless Speaker’s current mode or (See page 9)
status. The color of the LED indicator and the number of
lights indicate the active mode as described below. DC 19V Connect the AC/DC power adapter. (Power
Supply In) (See page 7)
LED indicator (W : White, M : Multicolor)
• When disconnecting the power cable of the AC/DC power adaptor
W W M W W from a wall outlet, pull the plug.
Do not pull the cable.
• The Multicolor LED changes to White, Cyan, Green, • Do not connect this unit or other components to an AC outlet until
Red, and Blue depending on the mode or status. all connections between components are complete.
• When you plug in the AC cord, the power button will begin working
(Multi Function) Button
in 4 to 6 seconds.
• In standby mode, press the (Multi Function) button
• When you turn on this unit, there will be a 4 to 5 second delay
to turn on the Wireless Speaker.
before it produces sound.
• Press the (Multi Function) button to change the
mode. Each time you change the mode, the LED lights
in white and then turns off.

LED indicator

Wi-Fi
White On → Off

Bluetooth
White On → Off

Digital Audio In
White On → Off

(Volume) Button
Adjusts the volume.

(Mic On/Off) Button

Press the button to turn the microphone on or off. When
the microphone is off, the LED indicator will light red.

LED indicator

Mic Off
Red On
Mic On

• To switch to Bluetooth Pairing state, press and hold

the (Mic On/Off) button on the side of the Wireless
Speaker for more than 5 seconds.

ENG - 6
04 CONNECTING ELECTRICAL 05 CONNECTING A MOBILE
POWER DEVICE
Use the power components to connect the Wireless Speaker to an
electrical outlet in the following order: Method 1. Connecting the SmartThings
• For more information about the required electrical power and
power consumption, refer to the label attached to the product. App (Wireless Network)
(Label: Rear of the Wireless Speaker Main Unit) To connect a Wireless Speaker to a mobile device via a wireless
1. First connect the power cable to the AC/DC adapter. network (Wi-Fi), the SmartThings app is required.
Connect the AC/DC adapter (with the power cable) to the Wireless ‒ It is required to have a certain higher version of OS for the smooth
Speaker. use of SmartThings. For more version informations, please refer to
2. Connect the power cord to a wall socket. the SmartThings App description in the OS-specific market.

1 - Installation
• The SmartThings app allows you to control the 1
DC 19V functionality of and adjust the settings of the
Wireless Speaker.
• Download the SmartThings app from the app
store of your mobile device, or simply scan the 2
AC/DC Adapter Power Cord provided QR code and download the app.
• QR 1: V
 ideo Guide for SmartThings App
Connection
Rear of the Wireless • QR 2: Download SmartThings App
Speaker
2 - Device registration
NOTE 1. Run the SmartThings app on your mobile device.
• If you unplug and reconnect the power cord when the product is 2. Follow the on screen instructions and add the product to your
turned on, the Wireless Speaker turns on automatically. mobile device.
• Make sure to rest the AC/DC Adapter flat on a table or the floor. If the automatic pop-up window does not appear, press ( ) on the
If you place the AC/DC Adapter so that it is hanging with the AC Home screen to register the product.
cord input facing upwards, water or other foreign substances could If device search is not possible
enter the Adapter and cause the Adapter to malfunction. 1. Connect the Wireless Speaker from the mobile device to Bluetooth.
2. Tap “Devices” on the SmartThings App.
3. Slide the screen to the left to select the Wireless Speaker card
from “Personal Devices” and click “Register device in Samsung
account” to register the device.

3 - Control with SmartThings

1. With the SmartThings app open on your device, select the Wireless
Speaker that you have added.
2. The settings menu of the Wireless Speaker appears, where you
can adjust the various settings including volume, sound mode or
fine-tuning.
• For other users who want to control the Music Frame, tap
Menu ( ) on the SmartThing app of their mobile device and go to
‘How to use’ > ‘Share control of devices’ for reference.

ENG - 7
NOTE Output specifications for the SOUND MODE
• The illustration below may differ with the app version.
Effect Input Output

2.0 ch 2.0 ch

Adaptive Sound 5.1 ch 2.0 ch

Dolby Atmos® 2.0 ch

2.0 ch 2.0 ch

Music 5.1 ch 2.0 ch

Dolby Atmos® 2.0 ch

2.0 ch 2.0 ch
Sound Mode Standard 5.1 ch 2.0 ch

Equalizer Dolby Atmos® 2.0 ch

Advanced Sound Settings To change your Wi-Fi connection

1. Launch the SmartThings app from your mobile device (smartphone
SmartThings Hub
or tablet).
2. Tap the Wireless Speaker’s card and tap the ( ) icon.
3. Go to Device Settings > Network Status > Change Wi-Fi network,
and follow the onscreen instructions.
Sound Mode • Music : Provides more natural and room
filling sound for music content.
• Standard : Outputs the original sound.
Using Group Play
• Adaptive Sound : Analyzes the content in real • To benefit from this feature, add your Wireless Speaker to the
time and automatically provides the optimal SmartThings app.
sound field based on the characteristics of • To enable this, connect at least two audio devices to the same Wi-
the content. Fi network at 5 GHz.
• This is available on Samsung Sound devices that support Wi-Fi
Equalizer You can set the Bass and Treble.
released year 2024 or later.
SpaceFit Provides optimized sound quality by analyzing • This feature does not support TV sound.
Sound the listening spaces.
Configuring Group Play
Active Voice Analyzes external noise in real time while 1. Run the SmartThings app on your mobile device.
Amplifier Wireless Speaker is playing, so that voice audio 2. Add the Wireless Speaker in the SmartThings app according to the
can always be heard clearly. instructions in the “Method 1. Connecting the SmartThings App
‒ No data is saved during the analysis (Wireless Network) > 2 - Device registration” section.
3. Tap the Wireless Speaker’s card.
Advanced • Voice enhancement makes it easier to hear
4. On your mobile device, tap Create Group under the audio device
Sound spoken dialog in movies and TV.
icon.
Settings • Night mode is optimized for night time with
• Create Group button appears only when Wireless Speaker is in
the settings adjusted to bring the volume
Wi-Fi mode.
down but keep the dialog clear.
• If the Wireless Speaker is playing the TV sound, the connection
to the TV is disconnected when creating a group.
5. Enable Group Play.
6. Select a desired device in the list, and tap Apply.
• You can add a maximum of 4 devices.
• With Group Play, the audio will be output through the host
device alone.
• When a device connected to the host device switches to a
different source, the device will be deleted from the group
automatically.
• When the host device is connected to a TV, the generated group
will be deleted automatically.

ENG - 8
Disabling Group Play Deleting SmartThings Hub from the SmartThings app
1. Tap the audio device’s card. 1. On the devices screen , tap the Wireless Speaker device card.
2. On your mobile device, tap Edit Group under the audio device icon. 2. Tap SmartThings Hub at the bottom of the screen.
3. Disable Group Play. 3. Tap Removing SmartThings Hub to deactivate the SmartThings
• To disable an individual device, uncheck the device from the list Hub function.
and tap Apply. • When the SmartThings Hub function deactivates, using
changes to unset.
Using the SmartThings Hub
• This feature is available only with connection to the Samsung Connecting via Apple AirPlay
SmartThings dongle. The dongle is not included with this product, With AirPlay, you can enjoy music, podcasts, and other audio on your
and may not be available depending on the region. Samsung Wireless Speaker, right from your Apple devices.
• You can use the Wireless Speaker’s SmartThings Hub function to 1. Select from an AirPlay-supported app or Control Center on
connect the IoT devices (bulbs, plugs, sensors etc.) that require your iPhone, iPad, or Mac.
SmartThings Hub. 2. Select the Wireless Speaker from the list of available devices to
• To use the SmartThings Hub function, you must register the play the current audio to.
Wireless Speaker in the SmartThings app. • This feature may not be available in some countries.
Connecting the SmartThings dongle • To use AirPlay with your Samsung Wireless Speaker, the latest
1. Connect the SmartThings dongle (VG-STDB10A, sold separately) version of iOS, iPadOS, or macOS is recommended.
to the USB port on the Wireless Speaker. SmartThings Hub is • To enable AirPlay in your Wireless Speaker, you must first register
automatically registered. the device with the Samsung Smart Things app by agreeing with
the app’s terms and conditions.
• Make sure the Wireless Speaker is powered on and connected to
the same Wi-Fi network as your Apple® device.

SmartThings Dongle
(VG-STDB10A, sold
separately)

Registering an IoT device on the SmartThings app

1. On the mobile device, run the SmartThings app.
2. Add the Wireless Speaker in the SmartThings app according to the
instructions in the “Method 1. Connecting the SmartThings App
(Wireless Network) > 1 - Installation” section.
3. Tap the Wireless Speaker device card.
4. Tap SmartThings Hub at the bottom of the screen.
5. Tap Using SmartThings Hub, and then tap Set up to activate the
SmartThings Hub function.
• When the SmartThings Hub function activates, unset changes
to using.
• SmartThings Hub device card will appear next to the Wireless
Speaker device card.
6. On the Home screen, tap “ ‍ ” to add an IoT device.
• An IoT device card appears on the app when you successfully
add an IoT device.
• If you unplug the Wireless Speaker, devices connected through
the SmartThings Hub may be disconnected. You must reconnect
the devices once they get disconnected.

ENG - 9
Method 2. Connecting via Bluetooth Notes on Bluetooth connection
When a mobile device is connected using Bluetooth, you can hear • Locate a new device within 1 m to connect via Bluetooth
stereo sound without the hassle of cabling. communication.
• If asked for a PIN code when connecting a Bluetooth device, enter
• When you connect a paired Bluetooth
<0000>.
device with the Wireless Speaker off,
• The Wireless Speaker automatically turns off after 18 minutes in
the Wireless Speaker automatically
the Ready state.
turns on.
• The Wireless Speaker may not perform Bluetooth search or
connection correctly under the following circumstances:
Mobile device ‒ If there is a strong electrical field around the Wireless Speaker.
‒ If several Bluetooth devices are simultaneously paired with the
The initial connection Wireless Speaker.
When connecting to a new Bluetooth device, make sure the device is ‒ If the Bluetooth device is turned off, not in place, or
within 1 m distance. malfunctions.
• Electronic devices may cause radio interference. Devices that
1. Bluetooth Pairing button LED Indicator generate electromagnetic waves must be kept away from the
Wireless Speaker main unit - e.g., microwaves, wireless LAN
[Pairing]
devices, etc.
• The Wireless Speaker supports SBC data (44.1kHz, 48kHz).
• Connect only to a Bluetooth device that supports the A2DP (AV)
‒ Red → Green → Blue Blinks
function.
• You cannot connect the Wireless Speaker to a Bluetooth device
5 Sec that supports only the HF (Hands Free) function.
[Connection is complete] • When connecting the Wireless Speaker to a Bluetooth device, place
them as close to each other as possible.
• The farther the Wireless Speaker and Bluetooth device are from
‒ Cyan Blinks X3 each other, the lower the sound quality will become.
The Bluetooth connection may break when the devices are out of
 eady to connect via
R the effective range.
Bluetooth. • The Bluetooth connection may not function as intended in areas
1.
with poor reception.
2. On your device, select “Music Frame” from the list that appears. • A Bluetooth device may experience noise or malfunction under in
3. Play music files from the device connected via Bluetooth through the following conditions:
the Wireless Speaker. ‒ When the body is in contact with the signal transceiver on the
If the device fails to connect Bluetooth device or Wireless Speaker
• If you have an existing Wireless Speaker (e.g., “Music Frame”) in the ‒ In corners or when there is an obstacle in proximity, such as a
list of speakers on the Mobile device, delete it. wall or partition, where electrical changes may occur.
• Repeat steps 1 and 2. ‒ When exposed to radio interferences by other products
operating on the same frequency ranges, such as medical
equipment, microwave ovens, and wireless LAN devices.
‒ Obstacles such as doors and walls may still impact the sound
quality even when the devices are within the effective range.
• Note that your Wireless Speaker cannot be paired with other
Bluetooth devices while using the Bluetooth option.
• This wireless device may cause electrical interference during
operation.

ENG - 10
Disconnecting the Bluetooth device from a Wireless 3. Play the sound of content on the mobile device through the
Wireless Speaker.
Speaker
• This function connects a mobile device to the Wireless Speaker
You can disconnect a Bluetooth device from the Wireless Speaker. For
via Bluetooth by detecting vibration that occurs when the
instructions, see the Bluetooth device’s user manual.
device touches the Wireless Speaker.
• The Wireless Speaker will be disconnected.
• Make sure the mobile device does not tap a sharp corner of the
• If the Wireless Speaker is disconnected from the Bluetooth device,
Wireless Speaker. The Wireless Speaker or mobile device may
the multicolor LED indicator on the Wireless Speaker blinks “Red”
become scratched or damaged.
three times.
• It is recommended that the mobile device be covered with
Disconnecting the Wireless Speaker from the Bluetooth a case. Lightly tap the wide area in the upper portion of the
Wireless Speaker, without using excessive force.
device
• To use this function, update the SmartThings app to the latest
Press the (Multi Function) button on the side of the Wireless
version.
Speaker to switch the mode from “Bluetooth”.
The function may not be supported, depending on the app
• Disconnecting takes time because the Bluetooth device must
version.
receive a response from the Wireless Speaker. (Disconnection time
may differ, depending on the Bluetooth device) Setting the Tap Sound function
Use the SmartThings app to turn on the Tap View, Tap Sound function.
Using the Tap Sound 1. On the mobile device, run the SmartThings app.
Tap the Wireless Speaker with your mobile device to play the sound of 2. Select ( ‍ → ‍ ) in the SmartThings app screen displayed on the
content on the mobile device through the Wireless Speaker. mobile device.
• This function may not be supported, depending on the mobile 3. Set “Tap View, Tap Sound” to On to allow the function to work when
device. a mobile device moves close to the Wireless Speaker. The function
• This function is only compatible with Samsung mobile devices with is turned on.
Android 8.1 or later. NOTE
• When the mobile device is in power-saving mode, the Tap Sound
function does not work.
• The Tap Sound function may not work if there are devices near the
SmartThings App Wireless Speaker that cause radio interference such as electric
devices. Make sure devices that may cause radio interference are
placed at a sufficient distance away from the Wireless Speaker.

Mobile device

1. Turn on the Tap Sound function on your mobile device.

• For details on how to turn on the function, refer to “Setting the
Tap Sound function” below.
2. Tap the Wireless Speaker with the mobile device. Select “Start
now” in the displayed message window.
A connection is established between the mobile device and
Wireless Speaker via Bluetooth.

ENG - 11
06 CONNECTING TO A TV Connecting to a TV that supports Dolby
Atmos
Connecting via Wi-Fi Pre-connection Checklist
Pre-connection Checklist • Make sure that the content supports Dolby Atmos®.
• Wi-Fi connection is available only on Samsung TV.
• Check whether the wireless router (Wi-Fi) is turned on and the TV TV menu
Wi-Fi
is connected to the router.
• The TV and Wireless Speaker must be connected to the same
wireless network (Wi-Fi).
• If your wireless router (Wi-Fi) uses a DFS channel, you will not be
able to establish a Wi-Fi connection between the TV and Wireless
Speaker. Contact your Internet service provider for details.
• Because the menus may differ depending on the year of LED indicator :
manufacture, refer to your TV manual.
‒ White On → Off
1. For more information about Wi-Fi connection to the Wireless
Speaker, see page 7, “Method 1. Connecting the SmartThings App Wi-Fi
(Wireless Network)”.
2. Change the input source of the TV by using the Audio menu to 1. Connect the Wireless Speaker and TV to the same wireless network
Wireless Speaker. (Wi-Fi).
• Samsung TVs released in 2017 or later 2. For sound output of the TV, select Wireless Speaker.
Sound → Sound Output → Music Frame (Wi-Fi) 3. TV sound is output from the Wireless Speaker.

NOTE
• When you use Dolby Atmos®: If the input source is Dolby Atmos®,
refer to “Output specifications for the SOUND MODE” on page 8.
• Configuring Dolby Atmos® on your BD player or other device
connected to the TV.
Open the audio output options on the settings menu of your
BD player or other device and make sure that “No Encoding” is
selected for Bitstream. For example, on a Samsung BD Player, go to
Home Menu → Sound → Digital Output and then select Bitstream
(unprocessed).
• This function is available in some Samsung TVs and some Wireless
Speaker models.

ENG - 12
Using the Q-Symphony Function Connecting via Bluetooth
• When the Wireless Speaker connects to a Samsung TV that When a Samsung TV is connected using Bluetooth, you can hear
supports the Q-Symphony function you can play the sound stereo sound without the hassle of cabling.
simultaneously through the Wireless Speaker and the TV. If you • Only one Samsung TV can be connected
use the Q-Symphony function, the surround sound played on the at a time.
TV allows you to enjoy a richer, more three-dimensional surround • Samsung TV that supports Bluetooth
sound effect. can be connected. Check the
• When the Wireless Speaker is connected “Q-Symphony” menu specifications of your TV.
appears on the TV.
Settings ( ‍ ) → All Settings ( ‍ ) → Sound → Sound Output
• You can adjust the placement of the Wireless Speaker on the The initial connection
Q-Symphony Setup menu.
1. Bluetooth Pairing button LED Indicator

TV menu [Pairing]
Wi-Fi

‒ Red → Green → Blue Blinks

5 Sec
[Connection is complete]
LED indicator :

‒ White On → Off
‒ Cyan Blinks X3
Wi-Fi

 eady to connect via

R
NOTE Bluetooth.
• It can operate according to the Codec supported by TV.
• This function is supported only when both the wireless speaker and • Until pairing is complete, the Multicolor LED changes as Red →
the TV are connected to the same Wi-Fi network. Green → Blue in turn.
1.

• It is available with new Samsung TV models to be released 2024. 2. Select Bluetooth mode on the Samsung TV.
(e.g. Home ( ‍ ) → Menu → Settings ( ‍ ) → All Settings ( ‍ ) →
Sound → Sound Output → Bluetooth Speaker List → Music Frame
(Bluetooth))
3. Select “Music Frame” from the list on TV’s screen.
An available Wireless Speaker is indicated with Need Pairing or
Paired on the TV’s Bluetooth device list. To connect the Samsung
TV to the Wireless Speaker, select the message, and then establish
a connection.
4. You can now hear Samsung TV sound from the Wireless Speaker.
‒ If there is a connection log between the Wireless Speaker and
Samsung TV, the Wireless Speaker is automatically connected
by changing its mode to Bluetooth.
If the device fails to connect
• If you have an existing Wireless Speaker (e.g., Music Frame) on the
list of speakers on the Samsung TV, delete it.
• Then repeat steps 1 through 3.

ENG - 13
Disconnecting the Wireless Speaker from the Samsung Connecting using an Optical Cable
TV Pre-connection Checklist
Press the (Multi Function) button at the side of the Wireless When you use an optical cable and the terminals have covers, be sure
Speaker to select the mode other than “Bluetooth”. to remove the covers.
• Disconnecting takes time because the Samsung TV must receive a
response from the Wireless Speaker. (The time required may differ,
depending on the Samsung TV model.)

Notes on Bluetooth connection

Rear of the
• Locate a new device within 1 m to connect via Bluetooth Wireless Speaker
communication.
• If asked for a PIN code when connecting a Bluetooth device, enter TV D.IN
Optical Cable (not supplied) (OPTICAL)
<0000>.
• The Wireless Speaker automatically turns off after 18 minutes in
the Ready state.
• The Wireless Speaker may not perform Bluetooth search or OPTICAL OUT
connection correctly under the following circumstances:
‒ If there is a strong electrical field around the Wireless Speaker.
‒ If several Bluetooth devices are simultaneously paired with the
Wireless Speaker.
‒ If the Bluetooth device is turned off, not in place, or
malfunctions.
• Electronic devices may cause radio interference. Devices that
generate electromagnetic waves must be kept away from the
Wireless Speaker main unit - e.g., microwaves, wireless LAN
devices, etc.

LED indicator :

‒ White On → Off

Digital Audio In

1. With the TV and Wireless Speaker turned off, connect the D.IN
(OPTICAL) port on the Wireless Speaker and the OPTICAL output
port on the TV with the optical cable (not supplied), as shown in
the figure.
2. Turn on the Wireless Speaker and TV.
3. Press the (Multi Function) button on the Wireless Speaker
unit and then select the “Digital Audio In” mode. Then the
announcement, “Digital Audio In” is output.
4. The TV sound is output from the Wireless Speaker.

ENG - 14
Using the Spacefit sound 07 CONNECTING AN
Provides optimized sound quality by analyzing the listening spaces.

Method 1. Connecting via Wireless Speaker

EXTERNAL DEVICE
1. Run the SmartThings app on your mobile device.
2. Tap Wireless Speaker’s card. Connecting using an Optical Cable
3. Enable Spacefit sound. Pre-connection Checklist
• This is available in all Sound modes. Make sure both the external device and the Wireless Speaker are
turned off.
Method 2. Connecting via TV
To enable this function, turn on the Adaptive Sound+ mode on your Rear of the
BD / DVD player /
Samsung TV menu. Wireless Speaker
Set-top box /
(Home ( ‍ ) → Menu → Settings ( ‍ ) → All Settings ( ‍ ) → General →
Game console Optical Cable D.IN
Intelligent Mode Settings → Adaptive Sound+) (OPTICAL)
• The sound mode on your Wireless Speaker will automatically (not supplied)
change to Adaptive Sound+ if you enable the Adaptive Sound+
mode on your TV.
OPTICAL OUT
NOTE
• This function works when the Wireless Speaker connects to some
of the Samsung TVs.

LED indicator :

‒ White On → Off

Digital Audio In

1. Use an optical cable (not supplied) to connect the D.IN (OPTICAL)

port of the Wireless Speaker and the optical output port of the
external device. See the figure below.
2. Turn on both the Wireless Speaker and the external device.
3. Press the (Multi Function) button on the Wireless Speaker
unit and then select the “Digital Audio In” mode. Then the
announcement, “Digital Audio In” is output.
4. The audio signal of the external device will sound from the
Wireless Speaker.

ENG - 15
08 ADDITIONAL FEATURES Activate/Deactivate Wi-Fi and Bluetooth
To activate/deactivate Wi-Fi connection
Adjusting the Wireless Speaker volume Press and hold the (Mic On/Off) button and the (-) button on the
side panel simultaneously for more than 30 seconds. This will turn on
with a TV remote control or off the Wi-Fi connection.
Adjust the Wireless Speaker volume using the TV’s remote control. To activate/deactivate Bluetooth connection
• This function can be used with IR remote controls only. Bluetooth Press and hold the (Mic On/Off) button and the (+) button on the
remote controls (remote controls that require pairing) are not side panel simultaneously for more than 30 seconds. This will turn on
supported. or off the Bluetooth connection.
• Set the TV speaker to External Speaker to use this function. • The Wireless Speaker will restart automatically when the Wi-Fi or
• Manufacturers supporting this function: Bluetooth function is activated or deactivated.
Samsung, VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA,
Hisense, RCA
1. Turn Off the Wireless Speaker.
• Tap the (Power) button on the SmartThings app.
Alternatively, press and hold both the (Multi Function)
button and the (Mic On/Off) button simultaneously on the
Wireless Speaker for 5 seconds.
2. Press the (Multi Function) button on the unit for 5 seconds.

5 Sec

• Each time you press the (Multi Function) button for 5 seconds,
the mode switches in the following order: “OFF-TV REMOTE”
(Default mode), “SAMSUNG-TV REMOTE”, “ALL-TV REMOTE”.

LED Indicator Status

Off-TV Remote Disable the TV remote

‒ Red Blinks X1 (Default mode) control.

Enable a Samsung
Samsung-TV
TV’s IR remote
‒ Cyan Blinks X1 Remote
control.

Enable a third-party
All-TV Remote TV’s IR remote
‒ Blue Blinks X1 control.

ENG - 16
09 INSTALLING THE WALL 1. Place the Wall Mount Guide against the wall surface.
• The Wall Mount Guide must be level.

MOUNT • If you are mounting a device below a mounted object, install at

least 10 cm apart.

Installation Precautions
• Install on a vertical wall only.
• Do not install in a place with high temperature or humidity.
• Verify whether the wall is strong enough to support the product’s
weight. If not, reinforce the wall or choose another installation
10 cm or more
point.
• Connect cables from the unit to external devices before you install
the Wireless Speaker on the wall.
• Make sure the unit is turned off and unplugged before you install
it. Otherwise, it may cause an electric shock.
2. Use a pen to mark the positions of the holes and remove the Wall
• Make sure you use the wall-mount component parts provided with
Mount Guide.
this product. Under any circumstances, any accident resulting from
using third-party parts shall not be covered by the warranty.

Wallmount Components

(A) Wall Mount Guide 3. Using an appropriately sized drill bit, drill a hole in the wall at each
marking.
x1 • If the markings do not correspond to the positions of studs,
x2 make sure you insert appropriate anchors or mollies into the
holes before you insert the support screws. If you use anchors
(M5 X L55) or mollies, make sure the holes you drill are large enough for
the anchors or mollies you use.
(B) Bracket-Wall Mount (C) Screw 4. Push a screw (not supplied) through each Screw, and then screw
each screw firmly into a support screw hole.
x2
x1

(D) Screw Anchor (E) Holder-Screw

x2

(F) Spacer

(B)
(C)

ENG - 17
5. Tighten the wall-mounting holder screw (E) on the back of the 7. Place the Wireless Speaker on the wall-mount bracket. Make sure
product. the holder screw is inserted properly on the Wireless Speaker.

CAUTION
• Tighten the screw firmly until it does not move at all.
Otherwise, the product may fall off and cause damage
or physical injury. Any accident resulting from improper
installation shall not be covered by the warranty.
On the wall-mount
installation, make sure
(E)
the screw (E) is secured
to the center hole of the
bracket (B).

Back View
(E) (B)

6. Remove the liners (x2) of the double-sided adhesive tape from the
spacers (F). Then, put them on the marked sites (x2) on the back of
the product.
(F)
x2

• The part (F) must be attached to prevent the product from moving
out of the wall-mount installation. On the stand installation, it
must be kept safely for later use. When reusing it, use a double-
sided adhesive tape for attachment.

ENG - 18
10 SOFTWARE UPDATE • If there is no update file available, the indicator blinks red
3 times.

LED indicator :
Auto Update
‒ Red Blinks X3
When the Wireless Speaker is connected to the Internet, software
• If the update file is in the same or lower version than the
updates automatically occur even when the Wireless Speaker is
existing, the indicator blinks cyan 3 times.
turned off.
• To use the Auto Update function, the Wireless Speaker must be LED indicator :
connected to the Internet.
‒ Cyan Blinks X3
The Wi-Fi connection to the Wireless Speaker will be terminated
if the Wireless Speaker’s power cord is disconnected or the power
is cut off. If the power is cut off, when the power comes back on or Reset
you reconnect the power cord, turn on the Wireless Speaker, and
then reconnect it to the Internet.

USB Update

5 Sec

SMARTTHINGS
DONGLE

With the Wireless Speaker on, press the (Volume) buttons on

the body at the same time for at least 5 seconds. The LED indicator
changes as shown below and then the Wireless Speaker is reset.
Rear of the Wireless
LED indicator
Speaker

Samsung may offer updates for the Wireless Speaker’s system ‒ White moves from left to right and
firmware in the future. right to left
When an update is available, you can update the Wireless Speaker by
connecting the USB drive that contains the update firmware to the
‒ Cyan Blinks X3
SMARTTHINGS DONGLE port of the Wireless Speaker.
1. Go to (www.samsung.com) → search for the model name from the
customer support menu option. ‒ Red Blinks X3
• For more information about update, refer to Upgrade Guide.
2. Download the upgrade file (USB type).
CAUTION
3. Unzip the file to create a folder with the file name.
• All the settings of the Wireless Speaker are reset. Be sure to
4. Store the created folder in a USB and then connect it to the
perform this only when a reset is required.
Wireless Speaker.
5. Turn on the Wireless Speaker. Then the product is updated within
3 minutes. Security updates information
Security updates are provided to strengthen the security of your
LED indicator : device and protect your personal information. For more information
on security updates, visit https://security.samsungtv.com.
‒ White moves from left to right and right to left • The website supports only some languages.

• During update, do not turn it off or remove the USB.

• If the yellow LED is on after the software update is completed,
this means that an additional update is in progress. When this
happens, don’t turn off the power or remove the USB.
• If update does not proceed, reconnect the Wireless Speaker
power cord.
• When the latest version is installed, no update is performed.
• Depending on the USB type, update may not be supported.

ENG - 19
11 TROUBLESHOOTING Sound drops out when connected via Bluetooth.

Before seeking assistance, check the following. • Some devices can cause radio interference if they are located too
close to the Wireless Speaker. e. g. microwaves, wireless routers,
Wireless Speaker does not turn on. etc.
• If your device that is connected via Bluetooth moves too far away
• Check whether the power cord of the Wireless Speaker is
from the Wireless Speaker, it may cause the sound to drop out.
correctly inserted into the outlet.
Move the device closer to the Wireless Speaker.
Wireless Speaker works erratically. • If a part of your body is in contact with the Bluetooth transceiver
or the product is installed on metal furniture, the sound may drop
• After removing the power cord, insert it again.
out. Check the installation environment and conditions for use.
• Power cycle the external device and try again.
• If there is no signal, the Wireless Speaker automatically turns off Wireless Speaker will not connect to Wi-Fi.
after a certain period of time. Turn on the power.
• Check whether your wireless router is on.
The Wireless Speaker indicator turns solid red. • Turn off the router, turn it back on, and then try again.
• The Wireless Speaker will not connect if the wireless signal is too
• The microphone is turned off.
weak. Try moving the router closer to the Wireless Speaker, or
Turn on the microphone. (See page 6.)
eliminating any obstacles that are between the Wireless Speaker
and the router, if possible.
Sound is not output from the Wireless Speaker.
• If your wireless router is new, you will need to reconfigure the
• The volume of the Wireless Speaker is too low or muted. Adjust speaker’s network settings.
the volume. • Wireless Speaker does not support Wi-Fi 6.
• When any external device (STB, Bluetooth device, mobile device,
etc.) is connected, adjust the volume of the external device. The Wireless Speaker does not turn on automatically with the TV.
• For sound output of the TV, select Wireless Speaker. (Samsung
• When you turn off the Wireless Speaker while watching TV, power
TV: Home ( ‍ ) → Menu → Settings ( ‍ ) → All Settings ( ‍ ) →
synchronization with the TV is disabled. First turn off the TV.
Sound → Sound Output → Select Wireless Speaker)
• The cable connection to the Wireless Speaker may not be loose. The AVA function is not available in the following cases.
Remove the cable and connect again.
• The AVA function will not be available using Q-symphony
• Remove the power cord completely, reconnect, and turn the
function.
power on.
• The AVA function will not be available when the microphone is
• Reset the product and try again. (See page 19.)
turned off.
I want to hear the audio signal from the Wireless Speaker alone.
After connecting the TV to the Wireless Speaker, I switched the
• If you hear sounds from both the TV and Wireless Speaker, go to Wireless Speaker mode. Then no sound is output from the TV.
the Settings menu for the TV audio and change the TV speaker to
• If you connect your Wireless Speaker to a mobile device while the
External Speaker.
Wireless Speaker is connected to the TV, the Wireless Speaker
Wireless Speaker will not connect via Bluetooth. outputs sound from the mobile device while keeping the TV
connection. So the TV sound will not be delivered anywhere.
• When connecting a new device, switch to “Bluetooth Pairing” for
• Disconnect the mobile device, and the TV sound will be output
connection. (Press the (Mic On/Off) button on the body for at
from the Wireless Speaker again.
least 5 seconds.)
• If the Wireless Speaker is connected to another device, Group Play is not enabled
disconnect that device first to switch the device.
• Check if the audio devices are newer models released year 2024
• Reconnect it after removing the Bluetooth speaker list on the
or later.
device to connect. (Samsung TV: Home ( ‍ ) → Menu →
• Check if the host device is connected to a Wi-Fi network as
Settings ( ‍ ) → All Settings ( ‍ ) → Sound → Sound Output →
source.
Bluetooth Speaker List)
• Make sure that all audio devices are connected to the same Wi-Fi
• Remove and reconnect the power plug, then try again.
network (at 5 GHz).
• Reset the product and try again. (For more information, refer to
“Reset”.)

ENG - 20
12 LICENSE

Dolby, Dolby Atmos, and the double-D symbol are registered

trademarks of Dolby Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories. Confidential
unpublished works. Copyright © 2012-2021 Dolby Laboratories. All
rights reserved.

• Apple and AirPlay are trademarks of Apple Inc., registered in the

U.S. and other countries and regions.
• Use of the Works with Apple AirPlay badge means that an
accessory has been designed to work specifically with the
technology identified in the badge and has been certified by
thedeveloper to meet Apple performance standards.

• Use your phone, tablet or computer as a remote control for

Spotify. Go to spotify.com/connect to learn how
• The Spotify Software is subject to third party licenses found here:
https://www.spotify.com/connect/third-party-licenses.

Being Roon Tested means that Samsung and Roon have collaborated
to ensure you have the best experience using Roon software and
Samsung equipment together, so you can just enjoy the music.

Open Source License Notice

Open Source used in this product can be found on the following
webpage (http://opensource.samsung.com).

ENG - 21