Model CS-MPT400

Melt Pressure and Temperature Transducers/Transmitters

Based on strain gauges technology, Xi’an Chinastar M&C Limited’s melt pressure transducers/transmitters are developed
and made 100% from stainless steel in mass production. Our melt pressure transducers/transmitters are suit to measuring
and controlling the pressure of some high temperature melts－such as chemical fiber, plastic, rubber and petrifaction－or
other over proof liquids. Our company draws on the advanced technology from aboard and manufactures with imported
materials and key apparatus, provides our products with stable work, credible capability, high accuracy, large outputted
signal, good dynamic capability, small over proof zero temperature-excursion and other merits.

For application in food industry, Xi’an Chinastar M&C Limited’s melt pressure transducers/transmitters are manufactured
without mercury.

CS-MPT400 are extended with a flexible stem extension, which provides a further thermal isolation to the electronic circuitry,
with a built-In thermocouple or thermal resistor. CS-MPT400 series allow simultaneous pressure and temperature
measurement at a single point The output of melt pressure transducers is of either mili-volt or amplified signal, such as
0~10Vdc or 4~20mA.

Features:
z wide measuring range from 0 ~10bar to 0~ 2000bar
z higher measuring accuracy up to 0.25%FS
z internal shunt calibration signal of 80%FS
z 100% stainless made, with Ti-n coating on diaphragm
z rigid and compact construction
z hastelloy diaphragm available on request
Dimension:

Specification:
Measuring range bar 0/10,0/20,0/35,0/50,0/70,0/100,0/200,0/350,0/500,0/700,0/1000,0/1400,0/2000
Combined error %FS 0.25,0.5,1.0
Signal output@FS mV/V 2.0,2.5,3.0,3.33
Amplified signal output 0/20mA,4/20mA,0/5Vdc,1/5Vdc,0/10Vdc,1/11Vdc
10(12max.) for MPT of mV/V output signal
Supply voltage Vdc 24(12-36 acceptable) for MPT of amplified output signal
Repeatability %FS 0.2
Overload pressure %FS 150
Input resistance Ω 350±10%
Output resistance Ω 350±10%
Insulation resistance Ω ≥500@100Vdc
Max.temp.@wetted parts ℃ 400
Zero adjustment %FS ±10
Span adjustment %FS ±6
Temperature effect on ZERO %FS/10℃ 0.5
Temperature effect on SPAN %FS/10℃ 0.5
Temperature measurement J type(Fe CuNi) thermocouple (standard) others on requests
Thermocouple connection 2 pin(male) plug in
Long period stability %FS/year <0.15
Compensated temp. range ℃ 0~80
Process connection 1/2”20UNF-2A (standard), M14X1.5, M18X1.5
Electrical connection 6-pin connector (standard) , 8-pin connector, 6-wire shield PVC cable
Max. mounting torque N.m 40
Net weight kg ~1

XI’AN CHINASTAR M&C LIMITED

Nr . 25 Gaoxin Road, Innovation Building F7, Tel: +86-29-8832 5819 or +86-29-8832 5919 Website: www.website.com
High-Tech Industry Development Zone Fax: +86-29-8823 7768 Email:[email protected]
Xi’an, China 710075
Model CS-MPT400
Melt Pressure and Temperature Transducers/Transmitters

CS-MPT400 Ordering Code

Model
CS-MPT100 CS-MPT200
CS-MPT300 CS-MPT400

Pressure Range
010=0~10bar 350=0~350bar
020=0~20bar 500=0~500bar
035=0~35bar 700=0~700bar
050=0~50bar 1000=0~1000bar
070=0~70bar 1400=0~1400bar
100=0~100bar 2000=0~2000bar
200=0~200bar

Output Signal
1=3.33mV/V 3=0~5V(4 wire)
2=0~10V(4 wire) 4=4~20mA(2 wire)

Process Connection
1= 1/2”-20UNF-2A(Standard)
2= M14X1.5
3= M18X1.5

Combined Error
1=±0.25%FS
2=±0.5%FS (Standard)
3=±1.0%FS

Length of Rigid Stem

1=76mm 4=228mm
2=102mm 5=305mm
3=152mm(standard) 6=others

Length of Flexible Stem

1=380mm(standard) 3=762mm
2=458mm 4=others

Temperature Measurement
J=J-thermocouple (standard)
K=K-thermocouple
E=E-thermocouple
Pt=Pt100 thermal resistor

Electrical Connection
X=6-pin male connector
Y=8-pin male connector
Z=6-wire shield PVC cable
Q=others

CS-MPT400 -- 700 --4 -- 1 -- 2 -- 3 -- 1 -- J -- X

Order code example: CS-MPT400 - 700-4-1-2- 3-1-J-X

CS-MPT400 melt pressure and temperature transducers of a flexible extension, measuring range 0/700bar, output signal 4~20mA, process thread 1/2”-
20UNF-2A ,combined error±0.5%FS,rigid stem length 152mm, flexible extension length 380mm, J-type thermocouple temperature sensor, 6-pin male
electrical connector and other requests.

XI’AN CHINASTAR M&C LIMITED

Nr . 25 Gaoxin Road, Innovation Building F7, Tel: +86-29-8832 5819 or +86-29-8832 5919 Website: www.websensor.com/en
High-Tech Industry Development Zone Fax: +86-29-8823 7768 Email:[email protected]
Xi’an, China 710075