Scribd
Upload
106 views3 pages

COMMBOG01EN

The document summarizes tank safety equipment from Servinox, including: - BOG safety valves that protect low pressure tanks from overpressure and vacuum, and are available in different sizes and with various accessories. - The valves use stainless steel, EPDM, and PTFE materials and can operate at pressures up to 0.5 bars and temperatures up to 120°C. - Options include pressure blowoff collection, ATEX certification, freezing protection, washing accessories, and different pressure/vacuum calibrations.

Uploaded by

hoangleanh87
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
106 views3 pages

COMMBOG01EN

The document summarizes tank safety equipment from Servinox, including: - BOG safety valves that protect low pressure tanks from overpressure and vacuum, and are available in different sizes and with various accessories. - The valves use stainless steel, EPDM, and PTFE materials and can operate at pressures up to 0.5 bars and temperatures up to 120°C. - Options include pressure blowoff collection, ATEX certification, freezing protection, washing accessories, and different pressure/vacuum calibrations.

Uploaded by

hoangleanh87
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

TANK EQUIPMENT

Safety valve BOG

SAFET Y

Combined pressure/vacuum Wide range of versions and accessories Easy, fast and economical maintenance Low pressure leak tightness Technical support for dimensioning Hygienic design

WWW.SERVINOX . COM

COMM BOG 01 EN

APPLICATION: BOG safety valves are tank safety devices (tanks not covered by PED 97/23/CE, with a working pressure < 0.5 bars) Depending on the model chosen, BOG safety valves protect low pressure tanks from overpressure and vacuum (breaking vacuum) SERVINOX possesses design tools to dimension a valve with respect to tank characteristics (diameter, height), its resistances (pressure and vacuum) and washing conditions (temperature, flow-rate) BOG safety valves are designed only to transport gases; if the valve is actuated, it must be removed and cleaned manually. TECHNICAL DATA: Materials: Parts in contact with product: 1.4404 stainless steel (316L) Gaskets: EPDM Discs: PTFE Characteristics: BOG safety valves are proposed in ND 40, 65, 100 and 150, compliant with most connection standards (DIN, SMS, OD, ISO; for ISO, ND 32, 50, 80 and 125). This equipment it totally autonomous, requiring no external control for its operation. In the standard version, pressure calibration is done with a stainless steel weight mounted on a PTFE disc, vacuum calibration is with a PTFE disc and pressure blowoff is not collected. In the standard version, pressure calibration must be between +2 and +50 mbars, and vacuum calibration is set at -2 mbars (for other calibrations, see the "Options" section); connections are welded In the standard version, the valves are designed to operate at a maximum pressure of 0.5 bars, and at a maximum temperature of 120C. Elastomers and plastics used are US FDA compliant.

SAS SERVINOX [email protected]

34-36 AVENUE ROGER HENNEQUIN F-78190 TRAPPES CEDEX

TEL : +33(0)1.30.16.15.00 FAX : +33(0)1.30.16.15.01

OPTIONS: - Pressure blowoff collected - ATEX version 94/9/CE, zones 1 & 2, gases and dust (requires the pressure blowoff collection option) - Protection against freezing by a temperature probe, heater cable and thermostat, to ensure valve operation at outdoor temperatures lower than 0C - Dripping collector and vacuum insect trap filtration - Washing nozzle (requires the dripping collector and insect trap filter) - SMS 25 male connector on elbow for sterile air admission, enabling the use of a single tank tap for protection (pressure and/or vacuum) and to create an inert atmosphere - Inductive opening detection (PNP/NPN programmable) in vacuum - Pressure calibration with spring (60 to 490 mbars), requires the pressure blowoff collection option - Vacuum calibration by stainless steel weight, from -5 to -50 mbars - Vacuum calibration by external spring, for calibration lower than -50 mbars - Female connections by clamp or flange - Gaskets adapted to operating conditions (FKM, silicone, nitrile) - Other grades of material on demand COMMISSIONING AND MAINTENANCE: For all information concerning installation, commissioning, use and maintenance of this equipment, refer to technical notice XXX x F.

WWW.SERVINOX . COM

You might also like