EFLAG Technologies

Pre & Post launch drive test with TEMS 9.1

Prepared by : Ashish Pratap Singh Sr. Engineer 3G NPO E-FLAG Technology

TEMS 9.1
3G DRIVE TEST TOOL

Data Collection Requirements

1 2 3 4

TEMS 9.1 SOFTWARE Dongle Mobile Phone-SONY ERICSSON Z750i GPS Garmin-72

Contents
TEAM SOFTWAR INSTALLATION KIT CONFIGRATION (Phone ,Gps) DRIVE TEST PARAMETER

BTS

STEPS FOR INSTALLING TEMS 9.1 SOFTWARE :1 -First install .Net 3 and .net 3.5 in your PC:-

2-Now install TEMS 9.1:-

3- After installing TEMS, install the driver of Dongle, Mobile phone, and GPS Beffo cable by connecting the equipment in different ports.
Dongle driver is automatically install in your PC just when you connect in your PC. But for Mobile and Beffo cable driver, you have to give the path of the driver.

4-After installing device drivers, Copy and Paste above patch files in C:\Program Files\Ericsson\TEMS Products\TEMS Investigation\Application Folder. 5-Now open the TEMS window from. My Documents\TEMS Product Files\TEMS Investigation 9.1\Workspaces. In workspaces folder you have to open Investigation WCDMA GSM.

TEMS WINDOW AFTER INSTALLATION

STEP 1 FOR Configuration :-

STEP 2 FOR AAD EQUIPMENT :-

STEP 3 FOR PORT DEFINE:3 .Step Save It

2.Step Select MS 1. Step Select it

STEP 4 FOR MAKE NEW WORKSHEET :-

STEP 5 FOR New Worksheet :-

VOICE CALL MS-SHEET

STEP 6 FOR COMMAND SEQUENCE :-

Go to command sequence

STEP 7 FOR Open the Command Sequence window

COMMAND SEQUENCE WINDOW :-

EDIT(CTRL+E)

COMMAND SEQUENCE WINDOW APPLICATION

APPLICATION TESTING FOR HSPA -MS FOR VOICE CALL

VOICE CALL TESTING

VOICE CALL TESTING

2. STEPTEST NUMBER

3. STEP CALL Duration

HSDPA TESTING APPLICATION

1. FOR HSDPA APPLICATION TESTINGFTP DL

2. For SELECT DIAL-UP

DIAL-UP

3. For STEP SOURCE FILE NAME :-

FILE NAME

SAVE PATH

4. For REMOTE ADDRESS USER ,PASSWORD

IP ADDRESS

User name

password

5. For START TO HSDPA RUN(CTRL+G)

RUN

HSDPA TESTING APPLICATION

HSUPA COMMAND SEQUENCE STEP FOR TESTING :HSUPA-MS

1. DIALUP 2.FILE NAME 3.Save path 4.IP ADDRESS 5.USER NAME

4.PASSWORD

RUN

TEAMS 9. 1 MAP WINDOW

MAP WINDOW IN TEMS PRESENTATION POSITIONING MAP :-

MAP WINDOW FUNCATION :1. .OPEN MAP 2. LAYER CONTROL

Open Map

Layer Control

3G Tab File in Open Map

To open the Tab ,Vector in Layer Control :-

DRIVE TEST MAP WINDOW CELL SITE VECTOR :-

WCDMA INVESTIGATION WINDOW FOR VOICE CALL:-

PARAMETER WINDOW FOR VOICE CALL WCDMA :-

FOR VOICE CALL WCDMA RADIO PARAMETER WINDOW :-

WCDMA SERVING/ACTIVE SET + NEIGHOURS

This windows shows the Serving cell & Neighbors AS : Active Set MN: Monitored Neighbors DN: Dominant Neighbors

RADIO PARAMETERS WCDMA BAR CHARTS

FOR VOICE CALL-LAYER 3 MESSAGES :GO TO SIGNALINGLAYER 3 MESSAGES

FOR VOICE CALL EVENT COUNTER WINDOW :GO TO ANALYSISEVENT COUNT

AMR CODEC USAGE IN WCDMA

NOTES ON QUANTITIES DENOTING SIGNAL POWER

FOR VOICE SHORT CALL SAME WINDOW USE IN TEMS

HSDPA ANALYSIS

FOR HSDPA TESTING IN WCDMA :THIS WINDOW OPEN GO TO PRESENTATION---WCDMADATA SERVICEHSDPA ANALYSIS

It shows the Speed of HSDPA

HSDPA/HSUPA TESTING IN FTP(COMMAND PROMT) SERVER

HSDPA/HSUPA TESTING IN FTP SERVER

HSDPA/HSUPA TESTING IN FTP SERVER :-

We find out the RTT Average Value For HSDPA/HSUPA

HSUPA ANALYSIS

FOR WCDMA HSUPA TESTING :THIS WINDOW OPEN GO TO PRESENTATION-WCDMADATA SERVICE HSUPA ANALYSIS

HOW TO GENRATE MAP-INFO FILE WITH TEMS HELP :-

HOW TO GENRATE MAP-INFO FILE WITH TEMS HELP :STEP 1: GO TO TOOLBAR LOGFILE ----- EXPORT LOGFILE

STEP 2: GO TO EXPORT LOGFILEADD FILE:-

ADD DRIVE TEST LOGFILE

SELECT THIS FORMAT

STEP 3: GO TO SETUP WINDOW OPEN

Setup open

STEP 4: AFTER SETUP WINDOW OPEN 3 Step ok

1 Select it

2 Add It

STEP 5: SELECT MERGE OUTPUT AND THEN OK :-

1. SELECT IT 2 Open log file 3 Save Path 4 SELECT OK

START TO CONVERT LOG FILE TO MAPINFO FILE:-

START IT

LOG FILE CONVET TO MAPINFO FILE SHOWS SAVE PATH FOLDER

HOW TO AUTO-GENRATE REPORT IN TEMS 9. 1

PROCESS TO REPORT GENERATOR

OPEN TEMS

LOGFILE WINDOW

REPORT GENERATOR

SELECT WCDMA OUTPUT DIRECTORY

PROPERTIES FINIES

ADD LOGFLIE

STEP 1 OPEN TEMS GO TO LOGFILE REPORT GENERATOR

STEP 2 OPEN REPORT WIZARDADD LOG FILE :-

ADD LOG FILE

STEP 3 OPEN PROPERTIES AND SELECT WCDMAOK :-

2.Select ok

1 .Select It

STEP 4 FOR SAVE PATH ANDFINISH :-

1 Save Path 2 Finish

STEP 5 FOR PROGRESS AND RESULT OUT PUT REPORT:-

RETU(REMOTE ELECTRICAL TILT UNIT)

Two Cables are connected in RETU Dx1 Cable Tilt Monitor Cable

RETU(REMOTE ELECTRICAL TILT UNIT)

RET Unit is monitered from RNC to maximize or minimize Electrical Tilt. Minimum tilt should be 0 & Maximum tilt should be 10 We have also update the type of antenna in RNC i.e. single band, dual band or tri band antenna.

Also one Power Switch is in RET Unit. Upper press is ON & Down Press is OFF

RETU(REMOTE ELECTRICAL TILT UNIT)

WCDMA SPECIFICATIONS

DIFFERENCES BETWEEN WCDMA & SECOND GENERATION

SUMMARY OF WCDMA PARAMETERS

SPECTRUM UMTS

Third Generation Mobile Systems

End of Section