Scribd
Upload
30 views

Data Communications and Networking: Local Area Network Overview

- LANs connect computers, printers and other devices within an organization to share resources and information. Common LAN applications include connecting personal computers and large systems like mainframes. - Popular LAN topologies include bus, ring, star and hybrid variations. The star topology using switches is now most common. - Bridges and switches extend LANs to interconnect multiple local area networks, improving reliability, performance and addressing geography. Layer 2 switches in particular provide faster forwarding of frames between ports than traditional hubs.

Uploaded by

Seham Raheel
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
30 views

Data Communications and Networking: Local Area Network Overview

- LANs connect computers, printers and other devices within an organization to share resources and information. Common LAN applications include connecting personal computers and large systems like mainframes. - Popular LAN topologies include bus, ring, star and hybrid variations. The star topology using switches is now most common. - Bridges and switches extend LANs to interconnect multiple local area networks, improving reliability, performance and addressing geography. Layer 2 switches in particular provide faster forwarding of frames between ports than traditional hubs.

Uploaded by

Seham Raheel
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 24

Data Communications and Networking

Chapter 10 Local Area Network Overview

References: Book Chapters 15 Data and Computer Communications, 8th edition By William Stallings

LAN Applications
LAN consists of a shared transmission medium and a set of stations (computers, printers, ) LANs usually are owned by the organization that is using the network to interconnect equipment. There are different types of LANs, each with its own protocols. Applications of LAN
Personal computer LANs
Share resources (e.g., printers) Share information (e.g., files) Limited data rate (10Mbps 1000Mbps)
Interconnecting large systems (mainframes and large storage devices) High data rate A separate network to handle storage needs Hard disks, tape libraries, CD arrays Detaches storage tasks from specific servers

Today, some LANs dont use shared transmission medium anymore in order to improve the transmission performance

Backend networks

Storage Area Networks

LAN Topologies

Frame Transmission on Bus

Ring Topology
Consists of a set of repeaters in a closed loop
Repeater: a simple device that receives data on the incoming link and retransmits on the outgoing link Links are unidirectional Stations attach to repeaters

Frame
Circulates around the ring and pass all stations Destination recognizes its address and copies frame Circulates back to source and is then removed

Medium access control determines when a station can insert frame into the ring
5

Frame Transmission Ring

Star Topology
Each station is directly connected to a central node
Usually via two point-to-point links

Two types of central node


Simple one: operate in a broadcast fashion
Transmission of a frame from one station to the central node is retransmitted on all of the outgoing links Physically a star, logically a bus Only one station can transmit at a time The central node is referred to as a hub

Complex one: act as frame-switching device


An incoming frame is buffered in the central node and then retransmitted on the outgoing link to the destination station Intelligent and powerful More than one stations can transmit at the same time
Buffers are required at the central node to resolve conflict (if more than one frames are destined to the same station at the same time)

The central node is referred to as a switch

Hubs
Central element of a star topology Each station connects to hub by two lines Hub acts as a repeater
Transmit and receive So a link consists of two unshielded twisted pairs (UTP)
When one station transmits, hub repeats signal to each station Physically star, logically bus High data rate and poor transmission qualities of UTP Optical fiber may be used for about 500 m

Limited to about 100 m

Transmission from any station received by all other stations


No privacy, security issues If two stations transmit at the same time, collision

Buses and Hubs


Similarity:
All stations share capacity of bus (e.g. 10Mbps) Transmission from any station received by all stations Only one station transmitting at a time

Difference:
Hub uses star wiring to attach stations to hub Easy installation: each floor has a wiring closet and a hub can be placed there to connect all stations in this floor Easy maintenance: hub can recognize a malfunctioning station and auto-cut it out of the network Hub can form a tree topology: head hub, intermediate hubs

Improve performance with layer 2 switch


9

Shared Medium Bus and Hub

10

Choice of Topology
Transmission medium
Twisted pair: popularly used by todays Ethernet Baseband coaxial cable (digital signaling): was used by the original Ethernet Broadband coaxial cable (analog signaling): not popular due to the cost Optical fiber: popularly used by Ethernet Air: Wireless LAN becomes very popular today For bus and ring topology, installation also means removing some existing links, so it is costly For ring topology, a failure of one link disable the entire network For star topology, it can take advantage of the natural layout of wiring in a building, and installation/maintenance of one link does not affect other links
Star topology is the most popular one today

Installation and maintenance

11

LAN Protocol Architecture


In OSI reference model, network layer and above layers are independent of network architecture and are applicable to LANs, WANs, and MANs. So LAN protocol only concerns physical layer and data link layer. IEEE 802 protocols are the industrial standard on the specification of different LANs. It consists of three layers
Logical link control (LLC) Medium access control (MAC) Physical
12

IEEE 802 v OSI

13

802 Layers
Physical Layer
Encoding/decoding of signals Preamble generation/removal
for synchronization

Bit transmission/reception Transmission medium and topology

Medium Access Control


Manage access to a shared-access medium Not found in traditional point-to-point layer 2 data link protocol

Logical Link Control


Provide interfaces (called services) to higher layers Perform flow and error control
14

LAN Protocols in Context

15

Medium Access Control


The function of MAC is to control access to the shared transmission medium to provide an orderly and efficient use of the capacity. There are different types of medium access control schemes
Centralized scheme: a controller is designated that has the authority to grant access to the network, e.g., 802.16 (WiMax)
Advantages:
Greater control Simple access logic at station Avoids problems of co-ordination

Disadvantages:

Single point of failure Potential bottleneck

Distributed scheme (or decentralized scheme): the stations collectively perform a medium access control function to determine dynamically the order in which stations transmitm, e.g, 802.3 (Ethernet), 802.11 (WiFi) Synchronous scheme
We will study more about this in next Chapter.

Asynchronous scheme

a specific capacity is dedicated to a connection, like TDM, FDM


able to allocate capacity in response to demand

16

Generic MAC Frame Format

17

Bridges
There is a need to expand beyond the confines of a single LAN. Two network devices can be used to interconnect LANs: bridges and routers
Bridges work at Layer 2, whilst routers work at Layer 3

Bridge:
Basic bridges interconnect similar LANs, i.e., LANs use identical protocols Read all frames transmitted on one LAN and accept those address to any station on the other LAN, retransmit them on the second LAN More sophisticated bridges can interconnect different types of LANs (for example, an Ethernet and a token ring LAN), that is, it can convert one MAC format to another
18

Bridge Operation

19

Why Not One Large LAN?


There are several reasons for the use of multiple LANs connected by bridges
Reliability
For a single large LAN, a fault on the network may disable communication for all devices. By using bridges, the network can be partitioned into self-contained units
Performance on a LAN declines with an increase in the number of devices or the length of the wire. A number of smaller LANs will often give improved performance if devices can be clustered so that intranetwork traffic exceeds internetwork traffic. Multiple LANs may improve security of communications. A single LAN is always limited by its diameter. Two separate LANs are needed to support devices clustered in two geographically distant locations.

Performance

Security

Geography

In summary

Bridges provides an extension to the LAN that requires no modification to the communications software in the stations attached to the LANs. It appears to all stations on the two (or more) LANs that there is a single LAN.
20

Layer 2 Switches
In recent years, layer 2 switch has replaced hub in popularity. Switches act like telephone operators
Incoming frame from a particular station switched to appropriate output line

More than one station can transmit at a time


Multiplying capacity of LAN More network traffic is allowed

Two types of layer 2 switches


Store-and-forward switch: the switch accepts a frame on an input line, buffers it briefly, and then sends it to the appropriate output line
Involve a delay, but boosts the overall integrity of the network

Cut-through switch: the switch begins repeating the incoming frame onto the appropriate output line as soon as the switch recognizes the destination address
Yield the highest possible throughput, but at some risk of propagating bad frames because the switch cannot check the CRC prior to retransmission

21

Shared Medium Hub and Layer 2 Switch

22

Layer 2 Switch v Bridge


Layer 2 switch functions as a multiport bridge. Differences
Bridge handles frames in software, switch performs address recognition and frame forwarding in hardware Bridge only analyzes and forwards one frame at a time, switch has multiple parallel data paths, so it can handle multiple frames at a time

Bridge has suffered commercially


New installations typically adopt layer 2 switches with bridge functionality rather than bridges
23

Typical Large LAN Organization Diagram


Layer 3 switch: switch that implements the packet forwarding logic of the router

24

You might also like