Scribd
Upload
490 views6 pages

Terms in Welding Standard en 15085

The document discusses certification levels under the EN15085 standard for welding manufacturers. Certification level CL-1 applies to manufacturers that produce parts with welds classified as performance classes CP A to CP D. Examples of CL-1 parts include bogie frames, body shell components, buffers, and brake equipment. Certification level CL-2 applies to manufacturers of parts with welds classified as CP C2 to CP D. CL-3 applies to parts with welds classified as performance class CP D.

Uploaded by

0502ravi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
490 views6 pages

Terms in Welding Standard en 15085

The document discusses certification levels under the EN15085 standard for welding manufacturers. Certification level CL-1 applies to manufacturers that produce parts with welds classified as performance classes CP A to CP D. Examples of CL-1 parts include bogie frames, body shell components, buffers, and brake equipment. Certification level CL-2 applies to manufacturers of parts with welds classified as CP C2 to CP D. CL-3 applies to parts with welds classified as performance class CP D.

Uploaded by

0502ravi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 6

Some important terms used in EN15085:

Certification level (CL): It is level to classify the welded railway vehicle or the welded component depending on the weld performance class (CP) The certification level is abbreviated by CL

CERTIFICATION LEVEL -1(CL-1)


This level applies to welding manufacturers which manufacture welded railway vehicles or their welded parts with welded joints classified in weld performance classes CP A to CP D. Certification level CL 2 to CL 4 is included.

Examples Of CL -1 level manufacturers.


Bogie frames and bolsters; Body shell components (e.g. under frames, structures); Buffers and draw gear; Wheel set components (e.g. wheel set mountings, axle boxes, spring supports);

Brake equipment (e.g. magnetic track brake, brake rods, brake triangles, brake cylinders, brake cross beams);

Examples Of CL -1 level manufacturers


welded components for drag transmission from bogie to vehicle; Vibration dampers and their link between bogie and vehicle or between vehicles; supporting frames for heavy components (e.g. traction units, pantographs);

finishing welding of castings within components indicated above; External fuel tanks

CERTIFICATION LEVEL -2(CL-2)


This level applies to welding manufacturers which manufacture welded parts of railway vehicles with welded joints classified in weld performance classes CP C2 to CP D. Welded joints classified in weld performance class CP C1 are included if these welds are checked according to weld inspection class CT 1 according to EN 15085-5:2007, Table 1. Certification level CL 4 is only included according to welded joints of certification level CL 2 or CL 3.

CERTIFICATION LEVEL -3(CL-3)


This level applies to welding manufacturers which manufacture welded parts of railway vehicles with welded joints classified in weld performance class CP D.

You might also like