Scribd
Upload
202 views17 pages

CPICHPSCPThre EDCH2 MS

The document discusses strategies to reduce high speed uplink packet access (HSUPA) radio link failures by adjusting parameters that determine when the 2ms transmission time interval (TTI) is selected. It is observed that many 2ms TTI users may be contributing to high RL failures. The document proposes changing the CPICHRSCPThreEDCH2MS threshold from 136 to 125 to widen 2ms TTI coverage, and adjusting the CPICHEcNoThreEDCH2MS threshold from -6dB to -10dB for trial. Graphs show how the changes could improve 2ms TTI selection and reduce RL failures across several radio network controllers.

Uploaded by

Sieh Weeze
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
202 views17 pages

CPICHPSCPThre EDCH2 MS

The document discusses strategies to reduce high speed uplink packet access (HSUPA) radio link failures by adjusting parameters that determine when the 2ms transmission time interval (TTI) is selected. It is observed that many 2ms TTI users may be contributing to high RL failures. The document proposes changing the CPICHRSCPThreEDCH2MS threshold from 136 to 125 to widen 2ms TTI coverage, and adjusting the CPICHEcNoThreEDCH2MS threshold from -6dB to -10dB for trial. Graphs show how the changes could improve 2ms TTI selection and reduce RL failures across several radio network controllers.

Uploaded by

Sieh Weeze
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 17

HSUPA 2ms TTI

CPICHRSCPThreEDCH2MS

Executive Summary
HSD(U)PA Retainability KPIs affected due to
increasing Radio Link failure.
It is observed that the high number of HSUPA 2ms
TTI users maybe contributing to the high RL
failures.
Current setting for CPICHRSCPThreEDCH2MS =
136 and proposed to change to
CPICHRSCPThreEDCH2MS = 125.
Next proposal is to trial on the EcNo setting from
CPICHEcNoThreEDCH2MS= -6 dB to
CPICHEcNoThreEDCH2MS = -10 dB.

Selection of 2
ms TTI

The TTI selection procedure is triggered during:


UL channel type selection (DCH vs. E-DCH)
an ongoing existing HSUPA connection (TTI
switching)
RAB establishment or release (TTI
switching)
The 2 ms HSUPA TTI is selected if:
HSUPA 2 ms TTI is enabled by
HSUPA2MSTTIEnabled
UE supports 2 ms TTI
RAB combination supports SRB on HSUPA
HS U
PA 2
reconfigures E-DCH 2ms TTI E-DCH 10ms
ms RNC
TTTTI
I if
UETxPowerMaxRef
2ms TTI Coverage criteria not fulfilled
max. Tx power level a
reference UE can use
RNC; -50..33; 1; 24
dBm

Selection starts from CELL_DCH


CPICH RSCP (HSPA serving cell) must satisfy:

PtxPrimaryCPICH CableLoss* Meas CPICH


RSCP <
CPICHRSCPThreEDCH2MS
+ MAX(0,
Selection
starts from CELL_FACH

UETxPowerMaxRef
P_MAX)
CPICH
Ec/Io of current cell
must
satisfy: Meas CPICH Ec/Io >
CPICHECNOThreEDCH2MS
* set to 0 dB if no MHA

CPICHRSCPThreEDCH2MS
defines 2ms TTI coverage area
(max. path loss)
RNC; 50..160 dB; 1 dB; 136 dB
CPICHECNOThreEDCH2MS
defines 2ms TTI coverage area
(min. Ec/Io)
RNC; -24..0 dB; 1 dB; -6 dB

CPICHRSCPThreEDCH2MS Tunning

PtxPrimaryCPICH CableLoss* Meas CPICH RSCP < CPICHRSCPThreEDCH2MS + MAX(0,


UETxPowerMaxRef P_MAX)

For example 40 Watts calculation :

Current setting CPICH 35.4 dBm, Cable Loss 3 dB,


CPICHRSCPThreEDCH2MS 136, UETxPowerMaxRef 24 dBm, P-Max 46 dBm
Current 2ms TTI selection from 10 ms TTI when RSCP is better than
-103.6 dBm.
Meas CPICH RSCP > 35.4 3 136 Max (0, 24 46)
Meas CPICH RSCP > -103.6 dBm

Proposal new value for CPICHRSCPThreEDCH2MS = 125, selection of


2ms TTI will be better than -89.6 dBm
Meas CPICH RSCP > 35.4 3 125 Max (0, 24 46)
Meas CPICH RSCP > -92.6 dBm

CPICHRSCPThreEDCH2MS Tunning

Parameter name CPICH RSCP Threshold for E-DCH TTI 2 ms


Abbreviated name CPICHRSCPThreEDCH2MS
3GPP name Managed Object RNHSPA
Parameter group HCConfiguration
Modification On-Line

RSCP Distribution for all RNCs


2msTTI Region based on
new setting

Global Reference CPICHRSCPThreEDCH2MS Setting

Global Reference
CPICHECNOThreEDCH2MS Setting

PLMN Level
s TTI
m
2
A
P
U
HS
User
re
RL Failu

RNC118
Enable 2msTTi in Klang
cluster
Disable
2msTTI

Reduce
d

RNC117

re
RL Failu

s TTI
m
2
A
P
U
HS
User

RNC120

re
RL Failu

s TTI
m
2
A
P
U
HS
User

RNC124

TTI
s
m
A2
P
U
HS
r
Use

RL Failure

RNC111

RL Failure

TTI
s
m
A2
P
U
HS
r
Use

RNC121

RL Failure

TTI
s
m
PA 2
U
S
H
User

RNC125

re
RL Failu

TTI
s
m
PA 2
U
S
H
User

Thank You

You might also like