Ujian praktek TIK
sma pangudi luhur yogyakarta
tahun 2009/2010
oleh unggul prasetya
Ujian praktek TIK
sma pangudi luhur yogyakarta
tahun 2009/2010
oleh unggul prasetya
1. Membuat presentasi power point minimal 8 halaman slide
(materi bebas, cari diinternet)
1. Didalam power point di “ditempeli” film dan/atau flash (cari
diinternet)
2. Postingkan di dalam blog anda blogspot. Dengan cara di
embedkan di scribd.com contoh
http://belajartiksma.blogspot.com/2010/03/menempelkan-pd
f-viewer-di-blog.html
2. Cara mengumpulkan:
1. Print out hasil ppt dan alamat blog anda
2. Sertakan CD hasil ppt dalam satu folder:
kelas/nama/no.absen
3. Penilaian: hasil ppt, insert movie, insert Flash, posting
blog, dan upload data di www.scribd.com
KESEIMBANGAN
PARTIKEL
Equilibrium of a Particle (2-D)
Today’s Objectives:
Students will be able to :
a) Draw a free body diagram
(FBD), and,
b) Apply equations of
equilibrium to solve a 2-D
problem.
For a given cable
strength, what is the
maximum weight
that can be lifted ?
Free Body Diagram (FBD) (2-D)
Equations of Equilibrium (2-D)
Since particle A is in equilibrium,
the net force at A is zero.
So FAB + FAD + FAC = 0
or F = 0
In general, for a particle in equilibrium, F = 0 or
Fx i + Fy j = 0 = 0 i + 0 j (A vector equation)
Or, written in a scalar form,
These are two scalar equations of equilibrium (EofE). They
can be used to solve for up to two unknowns.
Fx = 0 and Fy = 0
EXAMPLE
Note : Engine mass = 250 Kg FBD at A
Write the scalar EofE:
+ Fx = TB cos 30º – TD = 0
+ Fy = TB sin 30º – 2.452 kN = 0
Solving the second equation gives: TB = 4.90 kN
From the first equation, we get: TD = 4.25 kN
Problem Solving (2-D)
F = 600 N
Given: The car is towed at constant
speed by the 600 N force
and the angle is 25°.
Find: The forces in the ropes AB
θ = 25o
and AC.
Plan:
1. Draw a FBD for point A.
2. Apply the EofE to solve for the forces
in ropes AB and AC.
Problem Solving (2-D)
F = 600 N 600 N
FBD at point A
A
25° 30°
θ = 25 o
FAB FAC
Applying the scalar EofE at A, we get;
+ Fx = FAC cos 30° – FAB cos 25° = 0
+ Fy = -FAC sin 30° – FAB sin 25° + 600 = 0
Solving the above equations, we get;
FAB = 634 N
FAC = 664 N
Example
SOLUTION:
• Construct a free-body diagram for the
particle at the junction of the rope and
cable.
• Determine the unknown force
magnitudes.
In a ship-unloading operation, a
15.6 kN automobile is supported by
a cable. A rope is tied to the cable
and pulled to center the automobile
over its intended position. What is
the tension in the rope?
EXAMPLE
Given: Sack A weighs 20 N.
and geometry is as
shown.
Find: Forces in the cables and
weight of sack B.
Plan:
1. Draw a FBD for Point E.
2. Apply EofE at Point E to solve
for the unknowns (TEG & TEC).
3. Repeat this process at C.
EXAMPLE (continued)
A FBD at E should look like the one
to the left. Note the assumed
directions for the two cable tensions.
The scalar EofE are:
+ Fx = TEG sin 30º – TEC cos 45º = 0
+ Fy = TEG cos 30º – TEC sin 45º – 20 N = 0
Solving these two simultaneous equations for the
two unknowns yields:
TEC = 38.6 N
TEG = 54.6 N
EXAMPLE (continued)
Now move on to ring C.
A FBD for C should look
like the one to the left.
The scalar EofE are:
Fx = 38.64 cos 45 – (4/5) TCD = 0
Fy = (3/5) TCD + 38.64 sin 45 – WB = 0
Solving the first equation and then the second yields
TCD = 34.2 N and WB = 47.8 N .
READING QUIZ
1) When a particle is in equilibrium, the sum of forces acting
on it equals ___ . (Choose the most appropriate answer)
A) a constant B) a positive number C) zero
D) a negative number E) an integer.
2) For a frictionless pulley and cable, tensions in the cable
(T1 and T2) are related as _____ .
A) T1 > T2
B) T1 = T2
C) T1 < T2
D) T1 = T2 sin
ATTENTION QUIZ
3. Using this FBD of Point C, the sum of
F2
forces in the x-direction ( FX) is ___ .
Use a sign convention of + . 20 N 50°
A) F2 sin 50° – 20 = 0 C
F1
B) F2 cos 50° – 20 = 0
C) F2 sin 50° – F1 = 0
D) F2 cos 50° + 20 = 0
SOAL TANTANGAN
a
b
10 m
5m
A
P 80 kg
40 kg
Jika b = 4 m,
tentukan harga P dan
jarak a
TERIMA KASIH
