Scribd
Upload
108 views

Network Protocols

This document summarizes key network protocols including TCP/IP, Ethernet, and CSMA/CD. It begins by explaining that communication protocols allow computers to exchange information by establishing agreed-upon rules. TCP/IP is then described as the fundamental protocol that underlies the internet, with TCP breaking files into packets and ensuring reliable delivery while IP routes packets to their destination. Ethernet is introduced as the most common networking technology, using the CSMA/CD protocol for devices to share bandwidth on a cable. Checksums, packet switching, and the roles of nodes are also outlined. The document concludes by posing review questions about defining protocols, components of TCP/IP, why checksums are used, what Ethernet defines, and how CSMA/

Uploaded by

Prasad
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
108 views

Network Protocols

This document summarizes key network protocols including TCP/IP, Ethernet, and CSMA/CD. It begins by explaining that communication protocols allow computers to exchange information by establishing agreed-upon rules. TCP/IP is then described as the fundamental protocol that underlies the internet, with TCP breaking files into packets and ensuring reliable delivery while IP routes packets to their destination. Ethernet is introduced as the most common networking technology, using the CSMA/CD protocol for devices to share bandwidth on a cable. Checksums, packet switching, and the roles of nodes are also outlined. The document concludes by posing review questions about defining protocols, components of TCP/IP, why checksums are used, what Ethernet defines, and how CSMA/

Uploaded by

Prasad
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 25

Networking

Protocols
For Unit 1 & 2 IT 2011-2014
By
Mark Kelly
[email protected]
VCE IT Lecture notes: Vceit.com

Version 2

Contents
TCP/IP
Ethernet CSMA/CD

Protocols
Communication protocols
are agreed sets of rules and
procedures for computers to
exchange information.
Like humans agreeing to
speak the same language
during a conversation.
For two computers to
exchange data, they must
be using the same
protocols.

Human Protocols
during a phone call, saying
Uh huh, Mmmm or Yeah
while the other person speaks
nodding to show
understanding
waiting for the other person
to stop talking before you
start
raising pitch of voice after a
question
airline pilots speak English,
refer to heights in feet, agree
on which direction to turn to
avoid collision, pronounce 9 as
niner, spell out letters with
words (Alpha, Bravo, Charlie

Network Protocols
There is a standard protocol for each network
communication task, such as:
- how to send data over the Internet (TCP/IP)
- how to send and receive email (POP, IMAP)
- how to request and deliver web pages (HTTP)
- how to request and deliver files (FTP)

Choosing
Sometimes there is more than one choice of
Protocols
protocol for a task, such as how messages pass
across a network (IPX/SPX vs TCP/IP, POP vs
IMAP).
As long as all the connected computers use the
same protocol, it really does not matter which
protocol is used (like diplomats agreeing on a
language for negotiations)
The internet only works because TCP/IP, POP, FTP
and HTTP are universal standards, used by all
shapes and sizes of computers.
6

The King of Protocols TCP/IP


The universal protocol for internet
communications.
The backbone of the internet.
Made up of 2 complementary
protocols
TCP (Transport Control Protocol)
and
IP (Internet Protocol)
7

TCP/IP invented in 1973 by Vint Cerf

Protocols TCP
TCP (Transport
Communication Protocol)
Breaks files into packets to be
sent across the internet or a
network. Each packet
contains:
-the address of the sender
-the destination address
-error-detecting checksum
-a chunk of data (e.g. 1K)

Protocols TCP/IP
IP (Internet Protocol)
Once a file has been chopped into
packets, the IP protocol delivers
each packet to its destination.
each packet can take a different route
from A to B, bouncing from router to
router getting more precise with each
hop.
the route is dynamically chosen for
each packet, based on internet
conditions at that time.

10

Protocols TCP/IP
TCP again
At the packets destination the
receiving computers TCP reassembles packets back into the
original file.
Recalculates checksum to see if
packet is OK
If packets are damaged, lost or
delayed in transit, TCP will request the
server to send the packet again.

11

Packet Switching
Any protocol that breaks files into
packets (like TCP/IP does) is called
packet switching.
(Compare with circuit switching used by
telephones where a full-time path is set
up for the duration of the communication)

12

Packet Switching
Why use packet switching?
A single bad bit in a file can ruin an entire
file.
Its quicker to re-send a portion of the file
rather than the whole file.
Important with noisy and unreliable
communication paths, such as dial-up
modem.
Many computers get to transmit some data,
rather than 1 PC tying up a channel for ages
with a huge transfer.

Imagine mailing a house from Melbourne


to Sydney one brick at a time.

13

ETHERNET
14

NETWORKING TECHNOLOGIES
A Networking Technology defines how
packets are handled and what the
hardware is like.
The only networking technology to know is

Ethernet
Used everywhere
Ethernet defines both protocols (CSMA/CD) and cabling
(e.g. UTP, thick coax, fibre), speeds etc.
15

How Ethernet Works


Network devices compete for attention using Carrier Sense
Multiple Access with Collision Detection (CSMA/CD).
Keep in mind: Only one signal can travel down a
cable at a time.
CS = Carrier Sense. Before transmitting over the
network, a computer first "listens" and waits until there is
no activity on the cable. When it sees its chance, it
transmits.

16

MA = Multiple Access. When one Ethernet station


transmits, all the stations on the cable hear the
transmission
CD = Collision Detection. Carrier sense does not
guarantee that two devices will not sense the same
silence and transmit simultaneously, and cause a
collision. CD detects this event.
Each node involved in the collision waits a random
number of milliseconds, then repeats the
transmission attempt.
The random waiting time prevents endless further collisions.
17

A node is any device attached to a


network that is capable of requesting and
sending packets (e.g. Usually a PC,
network printer)

18

Protocol Question Time


1.Define a network protocol.
2.What pair of protocols are the
basis of the internet, and what
does each do?
3.Why are checksum used?
4.What does Ethernet define?
5.What do CSMA/CD do?
19

Protocol Question Time


1.Define a network protocol.
Its an agreed-on set of rules that
computers use to ensure reliable
communications

20

does each do?


TCP breaks files into packets and
calculates checksums. It also
reassembles incoming packets
and tests for errors.
IP Guides packets from source to
destination across a network or
across the internet.

21

3. Why are checksum used?


Checksums are used to detect
damage to a packet after it
arrives at its destination. If the
checksum sent in the packet
and the checksum calculated
upon arrival do not match, the
receiving computer asks for the
packet to be sent again.
22

4. What does Ethernet define?


The hardware and necessary
protocols for networking.

23

5. What do CSMA/CD do?


Carrier sense (CS) checks for
silence on a cable before trying
to transmit onto it.
Collision detection (CD) detects
if more than one node
transmitted at the same time. It
then negotiates for the nodes
to try transmitting again.
24

Thanks!
Mark Kelly
[email protected]
IT Lecture Notes - vceit.com
This slideshow may be freely used in schools in Victoria, Australia.
For other uses, (e.g. publication) please contact me.
It may not be sold.
It must not be redistributed if you modify it.

25

You might also like