Scribd
Upload
28 views1 page

Safety Learning: Could This Happen in Your Operation?

A spotter was trapped between a forklift carriage and an adjacent slip stand while guiding a load collar onto a casing running tool. The spotter was conducting work under the elevated portion of the forklift when the incident occurred. To prevent future incidents, the drilling contractor will develop new safety procedures, install equipment to improve lift safety, provide training on forklift operations and risk assessment, and ensure lessons learned are applied across all rigs.

Uploaded by

shazniS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
28 views1 page

Safety Learning: Could This Happen in Your Operation?

A spotter was trapped between a forklift carriage and an adjacent slip stand while guiding a load collar onto a casing running tool. The spotter was conducting work under the elevated portion of the forklift when the incident occurred. To prevent future incidents, the drilling contractor will develop new safety procedures, install equipment to improve lift safety, provide training on forklift operations and risk assessment, and ensure lessons learned are applied across all rigs.

Uploaded by

shazniS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 1

HIPO Safety Learning: Could This Happen in Your Operation?

Forklift carriage lowered trapping spotter between the carriage and an


adjacent slip stand. Traction #2489971
1 Spotter (IP) reaching to guide the 2
load collar onto CRT. Head located
between forklift carriage & slips
stand.

Spotter (IP) viewing


the position of the
load collar.

If youd like to know


more, contact Kent Corser,
Wells Program Mgr.
(281) 366-2142 Actions:
Drilling contractor will develop a
3 procedure to safely install the load
ring onto CRT from the ground for
approval by Tesco prior to utilization.
Drilling contractor should get
What went wrong? stingers installed & operational for lift
The IP installing the load collar on the operations & provide training on use
41/2 casing running tool (CRT) was of stinger.
conducting work under the elevated BP & drilling contractor
portion of the forklift. management to develop a structured
Forklift operator did not stop the job program for pre-tower meetings to
when the IP began to work under the ensure an effective CoW for all tasks.
elevated portion of the forklift. Drilling contractor to conduct
Conducting work in a congested area training to close gaps on: forklift
specs, hand signals, risk assessment
resulted in the IP being in an unsafe
& identification.
position. Drilling contractor will ensure any
Incorrect use of forklift lifting chain on changes made will be implemented
single fork. on all other rigs operated for BP in
Wyoming.

You might also like