Scribd
Upload
72 views26 pages

Cahpter 4. Diffuser&Grill

This document discusses various types of air diffusion and extraction equipment used in HVAC systems, including: - Grills, registers, diffusers, disc valves, louvers, dampers, and sound attenuators that are used for supply, return, or exhaust of air. - Supply diffusers are selected based on throw length and noise level for their application, while extraction focuses more on sound level. - Common diffuser types include square, round, slot, swirl, and perforated ceiling diffusers, as well as jet diffusers for very high ceilings.

Uploaded by

henybam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
72 views26 pages

Cahpter 4. Diffuser&Grill

This document discusses various types of air diffusion and extraction equipment used in HVAC systems, including: - Grills, registers, diffusers, disc valves, louvers, dampers, and sound attenuators that are used for supply, return, or exhaust of air. - Supply diffusers are selected based on throw length and noise level for their application, while extraction focuses more on sound level. - Common diffuser types include square, round, slot, swirl, and perforated ceiling diffusers, as well as jet diffusers for very high ceilings.

Uploaded by

henybam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 26

4.

Air Diffusion and Extraction


Equipment
4. Air Diffusion and Extraction
Equipment
Introduction

Diffusers are suitable for supplies fresh air, return


air or extracts
Grills are suitable for extraction of used air
Diffusers are used for supply and extraction due
aesthetic reasons
Supply diffuser are selected based on throw length
and noise level depending on application using flow
rate.
For extraction sound level is more important
Grills

Supply air Grill


Supply Air Grill

Frame: High quality extruded aluminium profile with


30 mm flange width as standard. 12,16,24 mm
flange widths are optional.
Blades: Aerofoil blades from aluminium profiles.
Blade spacing: 20 mm as standard.
Grills

Return bar air grill (Horizontal)


Grills

Return bar air Grill (vertical)


Registers( Grills
with Dampers)

Supply air Register


Square Ceiling
Diffuser
Square Diffuser

ACD4 +D Four way ceiling diffuser for Damper Supply air


ACD4 Four way ceiling diffuser Return Air
Round diffuser
Disc valve

Disc valve are used to regulate exhaust or supply by


turning the cone
Square Diffuser

Slot width: 20 mm as standard. 16 mm, 25 mm and non


standard sizes available as option.
Number of slots available: 1, 2, 3, 4, 5, 6, 7, 8
Length: Up to 5.8 m available in a single piece.
Slot diffuser

Slot width: 20 mm as standard. 16 mm, 25 mm and non


standard sizes available as option.
Number of slots available: 1, 2, 3, 4, 5, 6, 7, 8
Length: Up to 5.8 m available in a single piece.
Swirl Diffuser
Perforated Ceiling Diffuser
Perforated Ceiling Diffuser
Jet diffuser

For very high ceiling in halls


Long throw
Conical jet
Exahaust Air Louver

Prevent rain and dust entering into exhaust duct or


fan
Fresh Air Louver

Prevent rain and dust entering to duct inlet


Volume Dampers

Controls volume flow rate of air through duct


Circular Damper

Controls volume flow arte of air through circular


duct
Fire Damper
Fire Damper

Damper close when fusible link melts


Link melts at about 70 oC during fire
The damper prevents the fire from
propagating from a room
Sound Attenuator

Reduces sound level created by fan or AHU


Sound Attenuator Detail

You might also like