0% found this document useful (0 votes)
45 views13 pages

PQ3 Global Setup + Cell Setup Datagrams

good

Uploaded by

prasoon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
45 views13 pages

PQ3 Global Setup + Cell Setup Datagrams

good

Uploaded by

prasoon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 13

PQ3 Global Setup + Cell Setup

datagrams
PQ3 overview

Global setup
Cell Setup

2 | Updated LTE Roadmap | December 2008 All Rights Reserved Alcatel-Lucent 2008
PQ3 overview : PQ3+CE test environment

3 possible configurations
layer1 team : UPMtest
layer2 team : digital only
layer2 team : preintegration with radio + UE

xCCM

PQIII
Ethernet driver
USL / VxWorks C-plane
messages
UPA
+ OAM
parameters PQII test
CE drive r
+ PDCP
PUCC Ethernet
H driver
CE

FPGA combiner

3 | Updated LTE Roadmap | December 2008 All Rights Reserved Alcatel-Lucent 2008
Global Setup
GLOBAL_RLC_MAC_SETUP_REQUEST
Pres
IE/Group Name Unit/Range IE Type Description Origin
ence
Common Message Header M NA Erreur ! Destination instance = 0xFFFF ALU
Source du Source instance = 0xFFFF
renvoi
introuvable
.
dlHARQPriorityAveragingCoef M Range : 1 256 , u16 Weighting factor for Downlink HARQ re-
ficient Unit : 1/256 transmission. Value is divided by 256
Representing a value and substracted from 1 to provide a
from 1/256 to forgeting factor between 0 and 0,996
256/256.
dlProportionalFairAveragingC M Range : 1 256 , u16 forgetting factor for time averaging
oefficient Unit : 1/256 spectral efficiency calculation in the
Representing a value downlink Scheduler. Value is divided by
from 1/256 to 256 and substracted from 1 to provide a
256/256. forgeting factor between 0 and 0,996
rankAveragingCoefficient M Range : 1 256 , u16 forgetting factor for time averaging rank
Unit : 1/256 calculation. Value is divided by 256 and
Representing a value substracted from 1 to provide a forgeting
from 1/256 to factor between 0 and 0,996
256/256.
cQIToSINRLookUpTable M Range : -40 +120 s8[15] A table, for transforming CQI values
unit : 0.25 dB into SINR estimated values in dB.
Representing a value
from -10.0 to +30.0
dB
dlMBRClippingFactor M from 1 5 u8 Multiplied by minus Downlink Maximum
Bit Rate, this parameter configures the
clipping applied by Downlink Scheduler
during the QoS metric computation.
dlGBRClippingFactor M from 1 5 u8 Multiplied by Downlink Guaranted Bit
Rate, this parameter configures the
clipping applied by the Downlink
Scheduler on the QoS metric
computation.
spare0 M unknown s32 Spare parameter for further extensions ALU
spare1 M unknown s32 Spare parameter for further extensions ALU
spare2 M unknown s32 Spare parameter for further extensions ALU
spare3 M unknown s32 Spare parameter for further extensions ALU
spare4 M unknown s32 Spare parameter for further extensions ALU
spare5 M unknown s32 Spare parameter for further extensions ALU
spare6 M unknown s32 Spare parameter for further extensions ALU
spare7 M unknown s32 Spare parameter for further extensions ALU
spare8 M unknown s32 Spare parameter for further extensions ALU
spare9 M unknown s32 Spare parameter for further extensions ALU
1

5 | Updated LTE Roadmap | December 2008 All Rights Reserved Alcatel-Lucent 2008
Global Cell Setup

PQII test PQIII nominal

Tests Global cell Setup


GLOBAL_RLC_MAC_SETUP_REQUEST
Generate request

GLOBAL_RLC_MAC_SETUP_RESPONSE
Verify response

6 | Updated LTE Roadmap | December 2008 All Rights Reserved Alcatel-Lucent 2008
Global RLC MAC Setup datagram

MR.c

(call UPM_SPV_ReadMsg )

TA_Reset

UPM_SPV_ReadMsg
(UPM_SPV_Msg.c) SYSINFO_reset

Call TL_spv_global_setup
CR_Reset (Contention
Resolution)

TL_spv_global_setup(TL_SPV.c) PAGING_Reset

SCD_Scheduler_Reset

7 | Updated LTE Roadmap | December 2008 All Rights Reserved Alcatel-Lucent 2008
Cell Setup
Pres
IE/Group Name Unit/Range IE Type Description Origin
ence
Common Message Header M Erreur ! Source & destination instance = cell ALU
Source du index identified by CEM Cell Index.
renvoi Value 0 in LA0.1.
introuvable This value will be used as a context
. index inside UPA.
CEM Cell Index M 02 u8 Index of the cell within CEM.
Set to zero in LA0.1 as CEM are single
cell.
LTE Cell Index M 05 u8 Index of the cell within eNodeB. Used to ALU
deduce IP address of UPA
196.168. LTECellIndex+128.2
Radio Cell Info M Erreur !
Source du
renvoi
introuvable
.
cellRadius M 0..14 (km) u8 Up to 14.6km in LA1.0 ([4], requirement#
(by step of 1 km) SRD-6896-690)

0 = 0 to 1 km, 1 = 1 to 2 km
2 = 2 to 3 km, 3 = 3 to 4 km
4 = 4 to 5 km, 5 = 5 to 6 km
6 = 6 to 7 km, 7 = 7 to 8 km
8 = 8 to 9 km, 9 = 9 to 10 km
10 = 10 to 11 km, 11 = 11 to 12 km
12 = 12 to 13 km, 13 = 13 to 14 km
14 = 14 to 14.6 km
Scheduler DL Cell Info M Erreur !
Source du
renvoi
introuvable
.
Common Logical M
Channels Info
> CCCH Info M
>> Common SAP M 065535 u16 SAP used as an UDP port for data intra-
NodeB communication.
>> LCID M 0 31 u8 Logical Channel Identifier
> BCCH Info M
>> Common SAP M 065535 u16 SAP used as an UDP port for data intra-
NodeB communication.
>> LCID M 0 31 u8 Logical Channel Identifier
> PCCH Info M
>> Common SAP M 065535 u16 SAP used as an UDP port for data intra-
NodeB communication.
>> LCID M 0 31 u8 Logical Channel Identifier
DL Physical Channel Info M
> PBCH Info M
>> pBCHPowerOffset M Range: -256 +255 s16 Provides the power offset of the PBCH
Representing a value compared to the Cell Reference Power
from -25.6 to +25.5
dB by step of 0.1dB
> PDCCH Info M Erreur ! Common control downlink channel info
Source du
renvoi
introuvable
.
> PRACH Info M Erreur ! Common control downlink channel info
Source du
renvoi
introuvable
.

9 | Updated LTE Roadmap | December 2008 All Rights Reserved Alcatel-Lucent 2008
Cell setup

PQII test PQIII nominal CE driver test

Tests Cell Setup


CELL_RLC_MAC_SETUP_REQUEST
Generate request

CELL_RLC_MAC_SETUP_RESPONSE
Verify response

Tests Sysinfo
CELL_RLC_MAC_SYSINFO_REQUES
Generate request T

CELL_RLC_MAC_SYSINFO_RESPON
Verify response SE MIB Msg

SU-1 Msg

10 | Updated LTE Roadmap | December 2008 All Rights Reserved Alcatel-Lucent 2008
Cell Setup datagram

MR.c
Add PBCH context
(call UPM_SPV_ReadMsg )

Add DBCH context

UPM_SPV_ReadMsg
(UPM_SPV_Msg.c)
Add CCCH configuration
(Msg3 & 4)
Call TL_spv_global_setup

Add PCCH context


TL_spv_add_cell(TL_SPV.c)
Scheduler Init

11 | Updated LTE Roadmap | December 2008 All Rights Reserved Alcatel-Lucent 2008
Backup
Backup

UPA Message Catalog 3.7

https://wcdma-ll.app.alcatel-
lucent.com/livelink/livelink.exe?func=ll&objId=52058700&objAction=browse&sort=name&viewType=1

13 | Updated LTE Roadmap | December 2008 All Rights Reserved Alcatel-Lucent 2008

You might also like