PC200-8

Monitor Operation

PC200-8 GST Nov 2005

Contents

Page Page
1. Outline of Screens and Switches 3,4 15. Service Menu Screen 28
2. Function Switches 5 (1) Monitoring 29
3. Start-up Screen and End Screen 6 (2) Failure History 30 ,31
4. Reading Service Meter after Powering Off 7 (3) Maintenance History 32
5. Work Mode Selection 8,9 (4) Maintenance Mode Change 33
6. Travel Speed Selection 10 (5) Telephone Number Setting 34
7. Auto-decelerator Selection, Wiper Switch/Washer Switch 11,12 (6) Initial Setting 35 - 43
8. Air-Conditioner Display Screen 13 (7) Adjustment 44 - 47
9. ECO Display/Energy-Saving Guidance Display 14 (8) Operation in Reduced Cylinder Mode 48,49
10. Camera Screen 15,16 (9) No-injection Cranking 50
11. Service Meter/Clock Selection 17 (10) Fuel Consumption Display 51
12. Maintenance Screen 18 16. Password Setting 52,53
13. User Menu Screen 19 17. Password Entry Screen at Power-ON 54
(1) Breaker/Attachment Setting 20 - 22 18. Attachment/Maintenance Password Setting 55
(2) Screen Adjustment 23 19. List of Cautions and Icons 56
(3) Clock Adjustment 24 20. Monitoring Code Table 57 - 61
(4) Language Setting 25 21. List of User Codes 62
(5) Economy Mode Adjustment 26 22. Error Code Table 63 – 65
14. Cautions 28

PC200-8 GST Nov 2005 Page 2 / 65

Outline of Screens and Switches (1)

Large type 7-inch

liquid crystal display

Function SW

Work mode and wiper SW

Air-conditioner SW

PC200-8 GST Nov 2005 Page 3 / 65

Outline of Screens and Switches (2)

① ②③④ ⑤ ⑥ ⑦ ⑧

⑫ ⑪ ⑩ ⑨

⑬ ⑭ ⑮

⑯ ⑰ ⑱

PC200-8 GST Nov 2005 Page 4 / 65

Function Switches

8-type multi-monitor
adopts [6 functional
switches].

PC200-8 GST Nov 2005 Page 5 / 65

Start-up Screen and End Screen

Power-ON Komatsu logo screen Power-OFF Screen display remains 5 sec.

(for 2 sec)

Start-up inspection screen

(2 sec)

Work mode and travel display

(2 sec)

Normal screen

PC200-8 GST Nov 2005 Page 6 / 65

Service Meter Reading with Key-OFF

＋
Keep Buzzer cancel SW and Auto-decelerator
SW pressed

PC200-8 GST Nov 2005 Page 7 / 65

Work Mode Selection (1)

If no operation is made for

5 sec and over, press F5
(return) to return to the
normal screen
Press Work Mode
Select SW
1) Each pressing of selects a work mode from P  E  L  B  P

2) Work mode can be selected also by using ( ) and ( )

Press to confirm the selected mode

Displays 2 sec Displays 2 sec

PC200-8 GST Nov 2005 Page 8 / 65

Work Mode Selection (2)

If no operation is made for

5 sec and over, press F5
(return) to return to the
normal screen
Press Work Mode
Select SW

1) Press to select B

2) Press ( ) to select B

Press ( ) to confirm the selected mode

If breaker mode is
selected, the screen
to the left always
appears.

PC200-8 GST Nov 2005 Page 9 / 65

Travel Speed Selection

Displays 2 sec Displays 2 sec

Each pressing of Travel

Speed Select SW
selects a speed from
Lo  Mi  Hi

PC200-8 GST Nov 2005 Page 10 / 65

Auto-Decelerator Selection
Pressing Auto-Decel Select Switch
selects auto-deceleration.

When auto-decel is selected, an icon appears

to the upper left-hand corner of the screen.

PC200-8 GST Nov 2005 Page 11 / 65

Wiper Switch/Washer Switch
An icon appears to the upper left-hand corner of the screen while the
wiper is in operation.
The figure below indicates "INT" wiping operation

Each pressing of
Wiper Switch selects
INT  ON  OFF .

Washer operates
while Washer Switch
is pressed.

PC200-8 GST Nov 2005 Page 12 / 65

Air-Conditioner Display Screen
If no operation is made for 5 sec and
over, press F5 (return) or F6 (decide)
to return to the normal screen

:Automatic air-conditioning switch

:Automatic air-conditioning switch

:Air-conditioner switch
Air outlet port
  
LCD Air blow mode Remarks

Front blow out

Selection disabled during
automatic operation
 :OFF switch

Front and rear blow out    :Air flow rate setting (for 6-stage adjustment)
Front and rear below blow out
:Temperature setting
Blow out downward

Blow out downward Selection disabled during

Defroster blow out automatic operation :Inside/outside air selection
Selection disabled during
Defroster blow out automatic operation
:Air blow selection

PC200-8 GST Nov 2005 Page 13 / 65

ECO Display/Energy-Saving Guidance Display
ECO display
 This display indicates the work load
state.
 If the indicator changes to orange, it
does not mean machine failure

Energy-saving guidance display

 If the lever remains in neutral

position successively for 5 minutes
and over without error/caution
indication, the display changes to
this screen, prompting operator to
stop engine.
 A lever operation or pressing F5
restores the original screen.

PC200-8 GST Nov 2005 Page 14 / 65

Camera Screen
Camera mark appears to F3 key
only if camera setting is present

Press F3 switch
( )

Press F5
switch (
) ① ② ③ ④
Camera 1 and 2 screens appear

: Screen display for the first camera set up

: Screen display for the second camera set up
: Screen display for the 3rd camera set up
: Camera 1 and 2 screens appear

PC200-8 GST Nov 2005 Page 15 / 65

Camera Screen (Warning, Error Generation
and Other Operations)
If error & caution are generated Error generation time

If an error is
generated and the
lever is at neutral
position for 10 sec
and over, the
display returns to
normal screen

If air-condition operation, travel speed selection or work mode change is made on the camera screen,
the display shifts to respective screen.

After the operation is completed, the After the operation is completed, the
After the operation is completed, the display returns to the standard screen. display returns to the standard screen.
display returns to the camera screen.
PC200-8 GST Nov 2005 Page 16 / 65
Service Meter/Clock Selection

When displaying clock

When displaying service meter

Each pressing of F4
function switch selects the
clock and service meter
display alternately

PC200-8 GST Nov 2005 Page 17 / 65

Maintenance Screen
Maintenance item
 Engine oil replacement
 Engine oil filter replacement
 Fuel main filter replacement
 Fuel pre-filter replacement
 Hydraulic oil filter replacement
 Hydraulic oil tank breather
replacement
 Damper case oil check and
replenishment
 Final case oil replacement
 Hydraulic oil replacement

Select an item
      and press F6
switch

Pressing F5 ( ) Maintenance time reset screen

function switch selects this
screen

To reset press
F6 ( )

Pressing F5 or F6 switch or
making no operation for 30 sec
restores the normal screen

PC200-8 GST Nov 2005 Page 18 / 65

User Menu Screen

Pressing F6 ( )
function switch selects this
screen

Press F5 switch to
return to normal screen Select and press F6
switch to shift to a
selected screen.
User menu item

 Breaker/Attachment setting (displayed only when attachment setting is made)

 Message display (displayed only when KOMTRAX is present)
 Screen adjustment
 Clock adjustment
 Language setting
 Economy mode adjustment

PC200-8 GST Nov 2005 Page 19 / 65

Breaker/Attachment Setting

Select the breaker/

attachment setting item
and press F6 switch

Work mode select screen

B, ATT appear on the

work mode select screen
on the machine installed
with the breaker and
attachment

PC200-8 GST Nov 2005 Page 20 / 65

Breaker Mode Flow Rate Setting Change
Select breaker and Breaker flow rate
press F6 switch
setting change

Select the breaker flow

rate item with F3 and
confirm with F6

Breaker flow rate

setting screen

Breaker setting
Select the
breaker with
Default setting is as follows: F3 and F4
Breaker 180 l/min
Breaker 100 l/min and confirm
with F6

Work mode select screen

Select the flow

rate with F3
and F4 and
confirm with F6

Press F5 to return to
the preceding screen

PC200-8 GST Nov 2005 Page 21 / 65

Attachment Flow Rate Setting Change
Select attachment and Attachment flow rate
press F6 switch
setting change

Select the attachment

flow rate item with F3
and confirm with F6

Attachment flow rate

setting screen

Default setting is as follows: (A) Select the

Attachment 430 l/min attachment with
Attachment 430 l/min Attachment setting (B) F3 and F4 and
confirm with F6

Select the flow

rate with F3
and F4 and
confirm with F6

PC200-8 GST Nov 2005 Page 22 / 65

Screen Adjustment
Nighttime screen adjustment

Select the screen

adjust item and
press F6 switch

Daytime screen adjustment

Light switch F2: Resets all adjusted values to the

default values
F3: Shifts the indicator to the left
For night F4: Shifts the indicator to the right
F5: Returns to the user menu screen
F6: Confirms the change and shifts on
For daytime to the following item
Shifts to luminance adjustment

Contrast adjustment

Brightness adjustment

and back to luminance adjustment

PC200-8 GST Nov 2005 Page 23 / 65

Clock Adjustment
Select the clock
adjust item and
press F6 switch

③ ④
F3: Advances time by one (1) hour F4: Sets the time back by one (1) hour
(For minute adjustment, this advances (For minute adjustment, this sets the
time by one (1) minute) time back by one (1) minute)

:F3: Shifts to the item on the left

:F4: Shifts to the item on the right
:F5: Cancels the change and
returns to the user menu screen
① ② ③ ④ :F6: Confirms the change
① ② ③ ④
PC200-8 GST Nov 2005 Page 24 / 65
Language Setting

F3: Moves down to an

item directly below
F4: Moves up to an item
directly above
F5: Cancels the change
and returns to the
user menu screen
F6: Confirms the change
and shifts on to the
user menu screen
Select the language
setting item and
press F6 switch

Ten (10) languages indicated in the diagram below can be set up

PC200-8 GST Nov 2005 Page 25 / 65

Economy Mode Adjustment
Eco-mode (E) is available for the
fuel-economy-minded customers

Select the economy

mode adjust item
and press F6 switch

F3: Moves down to an item directly below

F4: Moves up to an item directly above
F5: Cancels the change and returns to the
user menu screen
F6: Confirms the change and shifts on to
the user menu screen

PC200-8 GST Nov 2005 Page 26 / 65

Cautions
Symbol Display item Conditions for generation Display method to operator アイコン メンテナンス項目 アイコン
Symbol indication and
Engine water
temperature overheating
102C or higher intermittent buzzer
sounding
Automatic preheating indication
エンジンオイル交換

Engine water temperature 30C or lower Symbol indication

low エンジンオイルフィルタ交換
Symbol indication and
Hydraulic oil temperature drop
Hydraulic oil temperature
102C or higher intermittent buzzer 燃料メインフィルタ交換
overheating
sounding

Hydraulic oil temperature 20C or lower Symbol indication Hydraulic oil temperature rise
燃料プレフィルタ交換
low

Fuel low Fuel gauge 0 indication Symbol indication 作動油フィルタ交換

Coolant capacity drop
When the sensor Symbol indication and
Radiator coolant level
contact is OPEN intermittent buzzer 作動油タンクブリーザ交換
abnormally low
sounding

Charge voltage
Monitor input during
engine operation falls short
Charging voltage drop
abnormally low of specified value (7.8V) Symbol indication ダンパケースオイル点検補充

During engine
Air cleaner clogging operation and the
sensor contact OPEN
Symbol indication Water in fuel
ファイナルケースオイル交換

During engine operation Symbol indication and

Engine oil pressure and the engine oil pressure intermittent buzzer
abnormally low マシナリケースオイル交換
is 0.5k or under

Engine stopping and

sounding
Overheat
Engine oil capacity the sensor contact Symbol indication
abnormally low 作動油交換
OPEN

Water in fuel
Sensor voltage outside Symbol indication Engine oil capacity drop
specified range

Remaining time to the

Maintenance preliminary maintenance is less 30 sec indication after
notice than 30 hours start-up Fuel level low
Remaining time to the
maintenance is less 30 sec indication after
Maintenance warning
than 0 hours start-up

PC200-8 GST Nov 2005 Page 27 / 65

Service Menu Screen

Pressing
+1,2,3 selects
screens

Service menu item

01 Monitoring
02 Failure history
03 Maintenance history Select an item and
press F6 switch to shift
04 Maintenance mode change to a selected screen.
05 Telephone number setting
06 Default setting
07 Adjustment
08 Arm crane setting
09 Operation on reduced cylinders
10 No-injection cranking
11 Fuel consumption display
12 KOMTRAX setting indication (only when KOMTRAX setting provided)
13 KOMTRAX message indication (only when KOMTRAX setting provided)

PC200-8 GST Nov 2005 Page 28 / 65

Monitoring
Select the Select the item and press
monitoring item F6 switch
and press F6 Up to 6 items can be
switch selected.

Enter 99999 and press
F6 to select the
monitoring screen.
(The monitoring screen
appears also by pressing
F6 a bit longer or by
double-clicking F6)

Select an item and

press F6 switch to
shift to a selected
Pressing the work mode select, travel select or screen.
auto-decel switch during monitoring shifts the
display to this screen.

Pressing Hold
(F4) fixes the
numeric value
at the time of
the pressing.

PC200-8 GST Nov 2005 Page 29 / 65

Failure History
Service Menu Screen Failure History Select Screen
Select the failure
history item and
press F6 switch
Select the item
and press F6
switch

Failure history Failure history

of mechanical of electrical Failure history
system system of air-conditioner

Deletion of
failure history
of the
"E" indicates mechanical Pressing F2
that the system system is not switch erases
remains in error the air-
condition. available. conditioner
error.
PC200-8 GST Nov 2005 Page 30 / 65
Failure History Reset
Memorize necessary failure histories before erasing.
Pressing
+1,2,3
selects screen

Press F2 switch ( CLEAR) Select the item

and press F6
switch
Screen to erase all electrical abnormality record information Screen to erase individual electrical abnormality record
information

Press F6 to Press F6 to
erase all erase
selected
item

PC200-8 GST Nov 2005 Page 31 / 65

Maintenance History

Select the maintenance

item and press F6 switch

PC200-8 GST Nov 2005 Page 32 / 65

Maintenance Mode Change
Maintenance Mode Change Screen
Service Menu Screen Select the Maintenance Mode Change
maintena 00 Maintenance mode using/not using
nce mode 01 Engine oil replacement intervals
02 Engine oil filter replacement intervals
change 03 Fuel main filter replacement
item and 41 Fuel pre-filter replacement
press F6 04 Hydraulic oil filter replacement intervals
switch 05 Hydraulic oil tank breather replacement intervals
07 Damper case oil inspection and replenishment intervals
98 Final case oil replacement intervals
09 Machinery case oil replacement intervals
10 Hydraulic oil replacement intervals
99 Initialize all (not to be indicated on the menu)

Select the item and

press F6 switch
00: Maintenance Mode On/Off screen 01: Engine Oil Change Interval screen 1 99: Screen to clear all to the initial set values

PC200-8 GST Nov 2005 Page 33 / 65

Telephone Number Setting
Service Menu Screen Phone Number Entry screen

Select the telephone

number setting item
and press F6 switch

Make entry using the number keys

(0 to 9) and press F6 key to confirm
or press CLEAR to erase the
entered number.
Pressing F5 SW returns to
the preceding screen.

Telephone number will

appear to the bottom if
an error occurs

PC200-8 GST Nov 2005 Page 34 / 65

Default Setting
Service Menu Screen Default Screen

Select the
default setting
item and press
F6 switch

Default Setting

01 Work mode on power-ON

02 Unit selection
03 Attachment yes/no
04 Attachment/Maintenance password setting
05 Camera setting
06 ECO display setting
07 Breaker automatic judgment setting
10 Initialize all (not to be indicated on the menu)

PC200-8 GST Nov 2005 Page 35 / 65

Work Mode Display on Power-ON
Select the
work mode
item on
power-ON and
press F6
switch

Select a mode item and press F6 to change

the screen from the start-up to a selected
item.
Start-up screen Pressing F6 after entering "10" from the number keys on the
default setting screen will set the default upon power-ON to the
work mode the system was in when it was turned-OFF last
Work mode and travel display (2 sec) time.
If the breaker
mode was
selected, the
screen to the
Normal screen left appears
at start-up for
each power-
ON.

PC200-8 GST Nov 2005 Page 36 / 65

Unit Selection

Select the unit

selection item and
press F6 switch

Pressing F6 after entering "10" (all to default) using the number keys in the default
setting screen sets to the SI unit system mode.

PC200-8 GST Nov 2005 Page 37 / 65

Attachment-yes/no

Select the Attachment-

yes/no item and press F6

Pressing F6 after
selecting the
"Attachment-no"
deletes ATT from the
work mode select
screen.

Pressing F6 after entering "10" (all to default) using the number

keys in the default setting screen sets to the "Attachment-no"
mode.

PC200-8 GST Nov 2005 Page 38 / 65

Attachment/Maintenance Password Setting

Select the item

and press F6
switch

If selected to "Use" password, the

password screen (diagram below)
appears.

Pressing F6 after entering "10" (all to default) using the

number keys in the default setting screen sets to the
"Attachment password not using" mode.

PC200-8 GST Nov 2005 Page 39 / 65

Camera Setting

Select the
camera setting
item and press
F6 switch

Set the rear mounted

Two (2) screens will camera in reverse image
appear only when set for
using Camera 1 and 2

Pressing F6 after entering "10" (all to default) using the

number keys in the default setting screen sets to the
"three (3) cameras not in use" mode

PC200-8 GST Nov 2005 Page 40 / 65

 ECO Display Setting
Select the ECO
setting item and
press F6 switch


OFF for the ECO display turns the  Selecting OFF for the ECO guidance display turns the
no display screen to no display

ECO display

PC200-8 GST Nov 2005 Page 41 / 65

Breaker Automatic Judgment Setting

Select the item

and press F6
switch

When to "Use" is selected

If the breaker is hit in a mode other than B, the

pump controller automatically judges the breaker
and prompts operator to change the mode to
Mode B by displaying the screen to the left.

This judgment by the pump controller depends on

Working
Working Mode
Mode is not Breaker Mode. the waveform of the pump hydraulic oil pressure.
Set
Set Breaker Mode
Breaker Mode during
during using
using Breaker.
Breaker. Therefore the pump controller may make the
same judgment by error with other waveform
similar to that of the breaker pump oil pressure for
which care should be taken.

PC200-8 GST Nov 2005 Page 42 / 65

Set All to Default
Default Screen Screen to clear all to the initial set values
Enter "1" and "0"
using the number
keys and press
F6

Default Setting Default

01 Work mode on Power-ON Work mode at preceding Power-OFF time

02 Unit selection ISO unit
03 Attachment-yes/no Attachment-no
04 Attachment/Maintenance Password Setting Not using
05 Camera setting Three (3) cameras not using
06 ECO display setting Display
07 Breaker automatic judgment setting Not using
10 Set all to default (not to be indicated on the menu)

PC200-8 GST Nov 2005 Page 43 / 65

 Adjustment
Select the adjustment
item and press F6 switch

 Adjustment item code No.  Parameter values

21:Pump Absorption Torque (F) Pump absorption torque (F) or (R)
22:Pump Absorption Torque (R) Parameter value 　 Torque
20:Low Speed 　　 008 　 +4 kg ･ m
44:Attachment Flow Adjustment
　　 007 　 +3 kg ･ m
 
　　 006 　 +2 kg ･ m
　　 005 　 +1 kg ･ m
　　 004 　　 0 kg ･ m 　
　　 003 　 -1 kg ･ m
　　 002 　 -2 kg ･ m
　　 001 　 -3 kg ･ m
　　 000 　 -4 kg ･ m

PC200-8 GST Nov 2005 Page 44 / 65

 Adjustment (Pump Absorption Torque (R))
Select "Pump
Absorption Torque
(R)" and press
"F6"

 Adjustment item code No.  Parameter values

21:Pump Absorption Torque (F) Pump absorption torque (F) or (R)
22:Pump Absorption Torque (R) Parameter value 　 Torque
20:Low Speed 　　 008 　 +4 kg ･ m
44:Attachment Flow Adjustment
　　 007 　 +3 kg ･ m
 
　　 006 　 +2 kg ･ m
　　 005 　 +1 kg ･ m
　　 004 　　 0 kg ･ m 　
　　 003 　 -1 kg ･ m
　　 002 　 -2 kg ･ m
　　 001 　 -3 kg ･ m
　　 000 　 -4 kg ･ m

PC200-8 GST Nov 2005 Page 45 / 65

 Adjustment (Low Speed)

Select "Low Speed"

and press "F6".

 Adjustment item code No.  Parameter values

21:Pump Absorption Torque (F)
Low Speed
22:Pump Absorption Torque (R)
20:Low Speed 　　 Parameter value 　 Speed
44:Attachment Flow Adjustment 　　 003 　 3.4km/h ① ②
　　 002 　 3.2 km/h
　　 000 　 3.0 km/h
　　 001 　 2.8 km/h

PC200-8 GST Nov 2005 Page 46 / 65

 Adjustment (Attachment Flow Adjustment)

Select "Attachment
Flow Adjustment" and
press "F6"

 Adjustment item code No. ②Parameter values

21:Pump Absorption Torque (F) Attachment Flow Adjustment
22:Pump Absorption Torque (R) Parameter value 　 Flow rate to ATT
20:Low Speed 　 (Compound operation
44:Attachment Flow Adjustment during boom RAISE)
① ②
　 003 　　 38%
　　 002 　 100%
　　 001 　　 70%
　　 000 　　 50%

PC200-8 GST Nov 2005 Page 47 / 65

Operation on Reduced Cylinders
Cylinder Cut-Out Screen

Select the item and

press F6 switch

Use F1 and F2 to select a cylinder cut-out

number and press "F6" SW. Then the background color
of the selected cylinder number turns white from yellow
to enable the cylinder cut-out mode.
1 1
To disable the cylinder cut-out mode, press "F6" SW; the
background color of the selected cylinder number turns
light-blue from red to stop cylinder cut-out operation.
1 1

PC200-8 GST Nov 2005 Page 48 / 65

Cylinder Cut-Out Mode Operation (Hold)

Press
"F4"
(Hold).

１ １

PC200-8 GST Nov 2005 Page 49 / 65

No-injection Cranking
Select the item
and press F6 Condition 1
switch The following conditions remain satisfied for
3 sec
(1) CAN communication normal
(2) Engine revolution: 0 rpm
(3) Operation on reduced cylinders normal
If the conditions are not met,
F5 ( ) the screen returns to no-injection cranking
display.

No-injection Cranking

Set to no-injection
cranking?
Returns
automatically Turning the start-up switch
to the service ON on the "No-injection
menu screen cranking enabled" screen set
the machine to no-injection
F6 ( ) cranking mode.

No-injection Cranking No-injection Cranking No-injection Cranking

F6 ( )
No-injection
Ending no-injection 無噴射ｸﾗﾝｷﾝｸﾞ可能
cranking enabled Engine running
cranking
After ending no-
injection mode

PC200-8 GST Nov 2005 Page 50 / 65

Fuel Consumption Display
Service Menu Screen

Select the
item and
press F6
switch

F1 (START) switch: split fuel consumption measuring start

F1 (STOP) switch: split fuel consumption measuring end
F2 (CLEAR) switch: clear display

PC200-8 GST Nov 2005 Page 51 / 65

Password Setting (1)
Normal screen No transition before the Password screen
lapse of 10 minutes after Initial password
Power-ON change
Password entry
　　　　　　 +729729 automatically
transfers to the
lock menu screen
upon entering
"000000" from the
number keys.

Change Lock Setting screen Engine Start Lock screen

Select "Change
Lock Setting"
and press "F6".

PC200-8 GST Nov 2005 Page 52 / 65

Password Setting (2)
Engine Start Lock screen New Password screen
Select "Change
Password" and Entering a new
press "F6". password from the
numeric keypad
appears "******".
Pressing "F6" SW
changes to the "New
Password screen".

"Password? screen"

Entering a new password from the

numeric keypad appears "******".
Pressing "F6" SW changes to the
"Engine Start Lock screen" after three
seconds lapsed.

PC200-8 GST Nov 2005 Page 53 / 65

Password Entry Screen on Power-ON

Power-ON

Password entry screen

The next screen

does not appear
unless a legal
password is entered

PC200-8 GST Nov 2005 Page 54 / 65

Attachment/Maintenance Password Setting
Password Entry screen
Normal screen No transition before the lapse
of 10 minutes after Power-ON
unless the setting is for
+Attachment/Maintenance
Password.
　　　　　　 +
555

"Password? screen"

Entering the second new password

from the numeric keypad appears
"******". Pressing "F6" SW changes
to the normal screen after about
three seconds lapsed

PC200-8 GST Nov 2005 Page 55 / 65

List of Cautions and Icons

PC200-8 GST Nov 2005 Page 56 / 65

Monitoring Code Table-1

PC200-8 GST Nov 2005 Page 57 / 65

Monitoring Code Table-2

PC200-8 GST Nov 2005 Page 58 / 65

Monitoring Code Table-3

PC200-8 GST Nov 2005 Page 59 / 65

Monitoring Code Table-4

PC200-8 GST Nov 2005 Page 60 / 65

Monitoring Code Table-5

PC200-8 GST Nov 2005 Page 61 / 65

User Code Table

PC200-8 GST Nov 2005 Page 62 / 65

Error Code Table-1

PC200-8 GST Nov 2005 Page 63 / 65

Error Code Table-2

PC200-8 GST Nov 2005 Page 64 / 65

Error Code Table-3

PC200-8 GST Nov 2005 Page 65 / 65