Scribd
Upload
346 views14 pages

User Guidance Huawei CME: RAN Consultant: Ray Khastur 20140904

The document provides guidance on how to export parameter values from the Huawei M2000 OMC Client software into an Excel spreadsheet. It involves creating a new project, selecting the desired site, choosing the "Custom MOC" option and specific parameters to collect. This will export the parameter values to an Excel file that can be opened and modified if needed before uploading changed values back to the M2000 system.

Uploaded by

Sunil Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
346 views14 pages

User Guidance Huawei CME: RAN Consultant: Ray Khastur 20140904

The document provides guidance on how to export parameter values from the Huawei M2000 OMC Client software into an Excel spreadsheet. It involves creating a new project, selecting the desired site, choosing the "Custom MOC" option and specific parameters to collect. This will export the parameter values to an Excel file that can be opened and modified if needed before uploading changed values back to the M2000 system.

Uploaded by

Sunil Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 14

User Guidance

HUAWEI
CME

RAN Consultant:
Ray Khastur‐20140904
Brief Information about CME

HUAWEI M2000 OMC Client can support exporting all parameter on MML Backup into EXCELSHEET, and also can
be use to change the parameter directly from the EXCELSHEET and upload to M2000 after we change some
parameter from consistency check of optimization part.
In this occasion the guidance will tell you how to export the parameter.

Note: The excel contain Macro with default value of parameter that match with MML Command require.
Only ON AIR Site can be export the data
1.Home Page
2.Create New Project (One Time Execution)

Once time you have already create a project, the value of parameter will always based on that date.
For example:
When you query all parameter at 4 Sept 2014 09:00, then there are some parameter changing at 10:00.
When you query again with the same project, CME will export same result at 09:00 morning.
2. Fill Project Name and Site Selection

Fill Project Name


Set as Admin Set as Private

Select Site and Move to Right Column


2. Fill Project Name and Site Selection (Cont’d)

Fill Project Name


Set as Admin Set as Private

Select Site and Move to Right Column

Click OK
3.Project Page
3.Exporting Hardware & RF Parameter
3.Exporting Hardware & RF Parameter (Cont’d)

Chose BTS Version


with properly
With scenario:
eNB Bulk Config

Next if done select


the site
3.Exporting Hardware & RF Parameter (Cont’d)

We have to chose
“Custom MOC”

Next if done select


the site
3.Exporting Hardware & RF Parameter (Cont’d)

We have to chose
“Custom MOC”

Chose which
parameter you
required to collect

Select destination
of Excelsheet
write the file, click
Next if Done
4.Collecting and Exporting Parameter
5.Excelsheet ready to be open (attached)

Double click to
F:\Work\PIWorks\
nesia\Feature Test open the file
THANK YOU

You might also like