Scribd
Upload
43 views

Proposed Analysis & Finding Badspot

The document proposes an analysis of badspots within 500m based on drive test clustering. Badspots are defined as having an RSCP/RSRP below -95dBm, EcNo below -13dB, or throughput below 64kbps. Potential causes of bad coverage, quality, call drops, call blocks, and throughput are identified, including issues like overlapping cells, penetration losses, interference, missing neighbors, and capacity constraints.

Uploaded by

heri banget
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
43 views

Proposed Analysis & Finding Badspot

The document proposes an analysis of badspots within 500m based on drive test clustering. Badspots are defined as having an RSCP/RSRP below -95dBm, EcNo below -13dB, or throughput below 64kbps. Potential causes of bad coverage, quality, call drops, call blocks, and throughput are identified, including issues like overlapping cells, penetration losses, interference, missing neighbors, and capacity constraints.

Uploaded by

heri banget
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Proposed Analysis & Finding

Badspot
Base on Drive test Clustering
Category Badspot

 Bad Coverage base on Scanner Log , Distance (+-) 500 m


 Bad Quality base on Scanner Log , Distance (+-) 500 m
 Call Drop Analysis base on Voice Log, Distance (+-) 500 m
 Call Block Analysis base on Voice Log, Distance (+-) 500 m
 Bad Throughput DL base on HTTP DL Log, Distance (+-) 500 m
 Bad Throughput UL Base on HTTP UL Log, Distance (+-) 500 m
Level on Badspot

 Bad Level < -95 dBm

 Bad Quality < -13 dB

 Bad Throughput < 64 Kbps


Analysis Category

 Bad Coverage :
1. Rscp/RSRP bad due to dragging cell suspect overshot and missing Handover cell to cell
2. Rscp/RSRP bad due to penetration low suspect blocking and Countur
3. Rscp bad due to penetration low suspect cell breathing in line with high traffic
4. Rscp/RSRP bad due to CPICH Power Low & RS Power Low
 Bad Quality :
1. EcNo bad due to Pilot Polution suspect triger 3 active set
2. EcNo Bad due to Ping Pong suspect No dominant serving
3. EcNo Bad due to Penetration Low suspect blocking and Countur
4. SNR bad due to Interference suspect face to face antenna sector with neighbor LTE to LTE
5. SNR bad due to Interference suspect level neighbor same high with cell serving minimum GAP 6 dB
 Call Drop:
1. Call Drop due to Missing Neighbor
2. Call Drop due to Hardware Problem (Alarm,VSWR,etc)
3. Call Drop due to IuB Drop UL
4. Call Drop due to Congestion
5. Call Drop due to Bad Coverage & Quality
 Call Block:
1. Call Block due to Missing Neighbor
2. Call Block due to RTWP High
3. Call Block due to IuB Drop
4. Call Block due to RRC Congestion
5. Call Block doe to Bad Coverage & Quality
 Bad Throughput:
1. Bad Throughput due to Capacity Issue
2. Bad Throughput due to Transport Issue
3. Bad Throughput due to Bad Coverage & Quality

You might also like