GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 10 (of 10)
Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL10-T01A-RevA
To use these test you simply “run” the slide show and use the down
arrow key to navigate. If you find any mistakes please let me know and I will fix
them and post the updated file to the www.mygdtsite.com. The part number
above reflects the current rev. Hope this helps, let me know!
Dave Hebert (Senior Level GD&T Professional)
Note: these tests are not associated with ASME
3/7/2019 If errors are found, or if you have any questions, please let me know…..http://www.mygdtsite.com 1
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 10 (of 10)
Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL10-T01A-RevA
Actual size = 4.25
What Is the MAX and MIN
width possible? (see right side
of dwg?)
__ MIN. =18.5
MAX. = 24.5 ___
FILL OUT INFO FOR (5mm)SLOT
- MMC __ 4
- LMC __
6 Actual size = 50.1
- Actual Bonus Tol. ___
.25
2
- Inner Boundary ___
- Resultant condition ___6.5 FILL OUT INFO FOR PART WIDTH
- Virtual condition 2__
- Bonus tolerance___ 0.9
- Actual allowable positional - Actual__= 0.9
allowable perpendicularity tol__
No 2.25
tolerance __ - Is it possible for the open slot geometry to
- Outer Boundary10 _ interfere with the thru hole geometry and still
meet the positional specifications?________
Yes
2
3/7/2019 If errors are found, or if you have any questions, please let me know…..http://www.mygdtsite.com
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 10 (of 10)
Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL10-T01A-RevA
Actual size = 9
What Is the MAX and MIN
width possible?
(right side of dwg width?)
___ MIN. = 10.5
MAX. =16.5 ___
FILL OUT INFO FOR SLOT
- MMC ___ 7 9
- LMC ___
- Actual Bonus Tol. ___
2
-Inner Boundary ___5
- Resultant condition ___
13
5
- Virtual condition ___
No allowable
- Actual Actual size = 36
4
-positional tolerance ___ __tu
Yes INFO FOR PERPENDICUALARITY:
-Actual allowable tolerance _____
2
3/7/2019 If errors are found, or if you have any questions, please let me know…..http://www.mygdtsite.com 3
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 10 (of 10)
Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL10-T01A-RevA
Actual size = 9.5
What Is the MAX and MIN
width possible?
(right side of dwg width?)
MAX. = ___ 7
13 MIN. = __
FILL OUT INFO FOR SLOT
- MMC ___ 9 - LMC 11
__
0.5
- Actual Bonus Tol. ___
-Inner Boundary ___ 7
- Resultant condition ___15
7
- Virtual condition ___ Actual size = 32.5
No allowable
- Actual
2.5
-positional tolerance ___ __=
Yes INFO FOR PERPENDICUALARITY:
-Actual allowable tolerance _____
.5
3/7/2019 If errors are found, or if you have any questions, please let me know…..http://www.mygdtsite.com 4
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 10 (of 10)
Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL10-T01A-RevA
Actual size = 4.5
What Is the tualhat side of dwg width?)
___ MIN. =6.5
MAX. = 12.5 __
FILL OUT INFO FOR SLOT
- MMC ___3
- LMC __
5
1.5
- Actual Bonus Tol. ___
-Inner Boundary ___1
- Resultant condition ___ 8
1
- Virtual condition __
- Actual allowable positional tolerance 3.5__
-Outer Boundary ___ 9
Actual size = 25.5
FILLNo
OUT INFO FOR PART WIDTH
__=.5
- Actual allowable perpendicularity tol.__
- Bonus tolerance___
.5
- What is the max size of the cylindrical
Yes zone?________________
tolerance It is not cylindrical
3/7/2019 If errors are found, or if you have any questions, please let me know…..http://www.mygdtsite.com 5
GD&T SELF EVALUATION TEST - DIFFICULTY LEVEL - 10 (of 10)
Reference – ASME Y14.5M - 1994 by David Hebert (GD&T Senior Level Certified but not associated with ASME) Test # - 1994-TL10-T01A-RevA
What Is the MAX and MIN width
possible? (right side of dwg width?) Actual size = 3.15
___ MIN. = NA*
MAX. = NA* __
FILL OUT INFO FOR SLOT
- MMC ___2
- LMC __
4
- Actual Bonus Tol. ___
1.15
-Inner Boundary ___ 0*
- Resultant condition ___4.5 Actual size = 50.3
0*
- Virtual condition __
- Actual allowable positional
tolerance __3.15 FILL OUT INFO FOR PART WIDTH
-Outer
No Boundary __ 8 - Actual allowable perpendicularity tol__
0.7
__=
- Max Possible Bonus tolerance___ 2
* Incorrect application of GD&T tolerancing
3/7/2019 If errors are found, or if you have any questions, please let me know…..http://www.mygdtsite.com 6
