Scribd
Upload
85 views15 pages

Buddha Institute of Techonology Digital Code Lock Using 8051 Microcontroller

This document describes a digital code lock project using an 8051 microcontroller. It contains 10 sections: introduction, history, block diagram, working principle, flow chart, components, applications, advantages, disadvantages, and conclusion. The project uses an 8051 microcontroller to read a 4-digit password from a keypad and unlock an door if the password matches what is stored in memory. It is designed for security applications like homes and organizations to allow authorized access with a password. The system only requires commonly available components and provides security with low power consumption.

Uploaded by

Anil Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
85 views15 pages

Buddha Institute of Techonology Digital Code Lock Using 8051 Microcontroller

This document describes a digital code lock project using an 8051 microcontroller. It contains 10 sections: introduction, history, block diagram, working principle, flow chart, components, applications, advantages, disadvantages, and conclusion. The project uses an 8051 microcontroller to read a 4-digit password from a keypad and unlock an door if the password matches what is stored in memory. It is designed for security applications like homes and organizations to allow authorized access with a password. The system only requires commonly available components and provides security with low power consumption.

Uploaded by

Anil Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 15

BUDDHA INSTITUTE OF TECHONOLOGY

DIGITAL CODE LOCK USING 8051


MICROCONTROLLER

Guided by: Mr Sudhir shukla Presented by:Anil kumar


:Deelip chaudhary
Co-ordinator: Mr mahesh kumar :Himanshu diwakar
:Archana sonkar
CONTENT:
1: INTRODUCTION
2:HISTORY
3.BLOCK DIAGRAM
4:WORKING PRINCIPAL
5.FLOW CHART
6:COMPONENTS
7:APPLICATION
8:ADVANTAGE
9:DISADVANTAGE
10:CONCLUSION
INTRODUCTION:
Password Based Door Security System using Microcontroller” is used in the places
where we need more security. It can also used to secure lockers and other protective
doors.
The system comprises a number keypad and the keypads are connected to the 8 bit
microcontroller AT89C2051. This is one of the popular microcontrollers. It has 20 pins
and there are 15 input/output lines. The microcontroller has a program memory of 2
kilobytes. The microcontroller continuously monitor the keypad

and if somebody enters the password it will check the entered password with the
password which was stored in the memory and if it they are same then the
microcontroller will switch on the corresponding device.

The system will allow the person who knows the password and it will not allow who
don‟t know the password and the system will also show the persons who try to break
the protection barrier.
HISTORY:

The ancient Romans also pioneered the earliest combination locks,


transforming the key from an object into an idea. ... Digital keys like security
tokens and RFID tags have given us a world where blasts of infrared light or
sequences of ones and zeroes will open doors. You can now even open
some doors with your face.
communication port. So it is clear that this 8051 architecture was
designed to cater many real time embedded needs.
WORKING PRINCIPAL:
_
The Main Part of the above Circuit diagrams is the
Microcontroller AT89C2051. The Keypad was the input device and it was connected in
a matrix format so that the numbers of ports needed are reduced.
The Microcontroller reads a four-digit password through the Keypad .
Then the Microcontroller compares the four digit password
with the number which is pre-programmed and if it is
equal then the Microcontroller will switch on the motor for
the door and if we enter the wrong password for more than three times then an alarm
will be switched on until a right password was pressed through the Keypad.
The Password was stored in the EEPROM and the password can be changed at anytime
using the same keypad. To change the password dial 12345 Old password - New
Password. The power supply section is the important one. It should deliver constant
output regulated power supply
for successful working of the project. A 0-12V/500 mA transformer is used for our
purpose the primary of this transformer is connected in to main supply through on/off
switch& fuse for protecting from overload and short circuit protection. The secondary
is connected to the diodes convert from 12V AC to 12V DC voltage. Which is further
regulated to +5v, by using IC 7805
COMPONENTS:

1.aurdino
2.4X4
1. Keypad Module
3.Buzzer
4.16x2 LCD
5.Resistor (1k,10k)
6.Pullup resistor (10K)
7.Capacitor(10uf)
8.Red led
9.Bread board
10.IC 7805
11.-11.0592 MHz Crystal
12.Power Supply
13.Connecting wires
APPLICATIONS:

1.Applications of Password Based Door Lock System


This simple circuit can be used at residential places to ensure
better safety.
2.It can be used at organizations to ensure authorized access to
highly secured places.
3.With a slight modification this Project can be used to control the
switching of loads through password.
1.It is a low range circuit, i.e. it is not possible to operate the circuit
remotely.
2.If you forget the password it is not possible to open the door
ADVANTAGE:

1.This project provides security


2.Power consumption is less
3.Used commonly available components
4.Project is simple and easy

DISADVANTAGE:
1.It is a low range circuit, i.e. it is not possible to operate the circuit
remotely.
2.If you forget the password it is not possible to open the door
FUTURE SCOPE:

1. We can send the data to a remote location using mobile or internet


2. We can add fingerprint sensor so entry will be allowed for the authorised
person using their fingerprints

3. We can add fire,wind and LPG sensors so that in case of accident the doors will
be automatically open
CONCLUSION:

To open, a person needs to 'Enter Password' through a keypad. Again the keypad is
checked for the entered digits and equivalent digits are recognized. The passkey is
exhibited as '****' on the LCD display. ... Thus, this is all about the functioning of
digital code lock with LCD using 8051 microcontrollers
THANK YOU

You might also like