Elastic Inversion Using Partial
Stack Seismic Data: Case
Histories in China
Outline
Introduction
Work Flow
Case Histories
Conclusions
Background of Elastic Parameter Inversion
RPP f ( , 1 ,Vp1 ,VS1; 2 ,Vp 2 ,VS 2 )
Aki & Richards :
RC ( ) 1
2 1 4V S 2
VP 2
sin 2
1 VP
2 cos VP
2 4Vs 2 Vs
V 2 Vs
p
sin 2
Shuey :
RC ( ) NI P A0 NI P
(1 ) 2
sin 2
1 VP
2 VP (tan 2 sin 2 )
Background of Elastic Parameter Inversion
Comparison of elastic impedance and acoustic impedance on recognizing of reservoir lithology
(According to Connolly.Patrick,1999)
Background of Elastic Parameter Inversion
Result of Acoustic
Impedance
Inversion
Oil-bearing reservoir
Unidentified
Result of Elastic
Impedance
Inversion
Oil-bearing reservoir
identified clearly
(According to Connolly.
Patrick,1999)
Outline
Introduction
Work Flow
Case Histories
Conclusions
Work Flow of Elastic Parameter Inversion
Seismic data processing
Elastic impedance generation
Petrophysical modeling
Wavelet estimation and horizon calibration
AVA Constrained Sparse Spike Inversion
Seismic Data Processing Flow
INPUT COMMON-SHOT GATHERS 3-D Random Noise Attenuation
Amplitude Recovery
Velocity Analysis
Filtering
Kirchhoff Pre-stack Time Migration
Spiking Deconvolution
Common-angle Gather Extraction
Bandpass Filter
CMP Sorting Limited-angle Stacking
Residual Statics
OUTPUT MIGRATED COMMON-ANGLE DATA
Seismic Data Volume of Partial Angle Gather Stack
0-10 deg 10-20 deg
20-30 deg Full stack
Petrophysical Modeling
Shale volume Total porosity Temperature , pressure, fluid type & density
Petrophysical model : Xu&White (DEM) & SCA
Vp&Vs modeling of brine-bearing reservoirs
Vp&Vs modeling of oil & gas-bearing reservoirs
Calculation of elastic parameters
Cross-plot analysis of elastic parameters of lithologies & fluids
Guide to identifying reservoirs & fluids
Petrophysical Modeling
Shear
Vsh Density M-PVp Sw M-PVs Lambda Poisson’s Vp/Vs S-imp P-imp Total porosity
modulus
ratio
A plot of petrophysical modeling of borehole logging data
Cross-plot Analysis of Elastic Parameters
Vsh Total-Pro Sw Vp / Vs P-impedance S-impedance
Sw
P-impedance
P-impedance
Vp / Vs
sh
Shale Brine sand Brine sand
Sand Oil sand Oil sand
S-impedance Lambda Vp / Vs
Wavelet Estimation and Horizon Calibration
Various wavelets are extracted from near, middle and far offset angle gather stack
seismic data using elastic impedance curves corresponding with angle series of
seismic data.
Wavelet & synthetic seismogram Wavelet & synthetic seismogram Wavelet & synthetic seismogram
(0-10deg angle gathers stack) (10-20deg angle gathers stack) (20-30deg angle gathers stack)
Wavelet Estimation and Horizon Calibration
Wavelet amplitude spectrum, phase spectrum, and time-frequency analysis
0-10deg
20-30deg
10-20deg
Wavelet analysis of different angle gathers Interpolated wavelet
& interpolation weights
Outline
Introduction
Work Flow
Case Histories
Conclusions
Case 1. Changqing Oilfield
0-10
deg
10-20
deg
Coal bed
20-30
deg
Case 1. Changqing Oilfield
S-impedance
Sandstone existence
P-impedance
Gas sandstone
Case 1. Changqing Oilfield
Lambda
Gas sandstone
Well A Well B
Vp/Vs
Gas sandstone
Case 2. Zhunger Oilfield
0-12deg 12-24deg
24-36deg fullstack
Case 2. Zhunger Oilfield
P-impedance of post-stack acoustic inversion
P-impedance of pre-stack elastic inversion
Case 2. Zhunger Oilfield
S-impedance
Poisson’s ratio
Case 2. Zhunger Oilfield
Vp/Vs
S-impedance
Case 2. Zhunger Oilfield
Red and yellow colors
show the favorable
distribution of
oil-bearing reservoirs
Favorable area :
40 Km2
Dry well
Oil well
Proposed well
Outline
Introduction
Work Flow
Case Histories
Conclusions
Conclusions
Elastic inversion is more powerful than conventional post-stack ac
oustic inversion, which provides more petro-physical parameters u
sed in identifying lithology and fluid distribution in a reservoir.
Our elastic inversion result fits very well with drilling results.
Elastic inversion obviously is a major direction in reservoir charact
erization.
Thank you for
your attention!