Scribd
Upload
131 views

OSI Transport Layer: CCNA Exploration Semester 1 - Chapter 4

OSI Transport Layer

Uploaded by

palogjohnjr
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
131 views

OSI Transport Layer: CCNA Exploration Semester 1 - Chapter 4

OSI Transport Layer

Uploaded by

palogjohnjr
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 25

OSI transport layer

CCNA Exploration Semester 1 – Chapter 4

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 1


OSI transport layer

 OSI model layer 4


 TCP/IP model Transport layer

Application HTTP, FTP,


TFTP, SMTP
Presentation Data
stream etc
Application
Session
Transport Segment TCP, UDP Transport
Network Packet IP Internet
Data link Frame Ethernet,
Network Access
WAN
Physical Bits
technologies

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 2


Transport layer topics

 Roles of the transport layer


 TCP: Transport Control Protocol
 UDP: User Datagram Protocol

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 3


Purpose of transport layer

Responsible for the overall end-to-end transfer


of application data.

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 4


Transport layer

 Enables multiple applications on the same device to


send data over the network at the same time
 Provides “reliability” and error handling if required.
(Checks if data has arrived and re-sends if it has not.)

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 5


Transport Layer TCP and UDP

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 6


Why two transport protocols?

 Some applications need their data to be complete with


no errors or gaps and they can accept a slight delay to
ensure this.
They use TCP. Reliable
 Some applications can accept occasional errors or
gaps in the data but they cannot accept any delay.
They use UDP.

Fast

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 7


TCP

 Sets up a connection with the receiving host before


sending data.
 Checks if segments have arrived and resends if they
were lost. (Reliability)
 Sorts segments into the right order before reassembling
the data.
 Sends at a speed to suit the receiving host. (Flow control)
 But – this takes time and resources.

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 8


UDP

 Connectionless. Does not contact receiving host before


sending data.
 Does not check if data arrived and does not re-send.
 Does not sort into the right order.
 “Best effort”.
 Low overhead.
 Used for VoIP, streaming video, DNS, TFTP

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 9


TCP and UDP headers

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 10


Port numbers

 Used by TCP and UDP as a form of addressing.


 Identifies the application and the conversation.
 Common application protocols have default port
numbers e.g.
80 for HTTP 110 for POP3 mail
20/21 for FTP 23 for Telnet

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 11


Port numbers

Client PC uses port 49152. Client PC uses port 80.


Chosen at random. Identifies HTTP as
Remembers this to identify application.
application and conversation. Requesting a web page.

Port + IP address = socket. E.g. 192.168.2.12:80

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 12


Port numbers

 The Internet Assigned Numbers Authority (IANA) assigns port


numbers.
 Well Known Ports (0 to 1023) - Reserved for common services and
applications such as HTTP, FTP, Telnet, POP3, SMTP.
 Registered Ports (1024 to 49151) - Assigned to user processes or
applications. Can be dynamically selected by a client as its source
port.
 Dynamic or Private or Ephemeral Ports (49152 to 65535) – Can be
assigned dynamically to client applications when initiating a
connection.

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 13


Netstat

Shows protocol, local address and port number,


foreign address and port number.
Unexpected connections may mean there is a
security problem.

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 14


Segment and sequence

 Both TCP and UDP split application data into suitably


sized pieces for transport and re-assemble them on
arrival.
 TCP has sequence numbers in the segment headers. It
re-assembles segments in the right order.
 UDP has no sequence numbers. It assembles
datagrams in the order they arrive.

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 15


Connection oriented

 TCP sets up a connection between end hosts before


sending data
 The two hosts go through a synchronization process to
ensure that both hosts are ready and know the initial
sequence numbers.
 This process is the Three-way handshake
 When data transfer is finished, the hosts send signals to
end the session.

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 16


Three way handshake

Send SYN Receive SYN


seq = x seq = x
Send SYN
Receive SYN ack = y
ack = y seq = x+1
seq = x+1
Send ACK Receive ACK
ack = y+1 ack = y+1

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 17


Terminating connection

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 18


Expectational acknowledgement

 TCP checks that data has been received.


 The receiving host sends an acknowledgement giving
the sequence number of the byte that it expects next.

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 19


Window size

 Controls how many bytes are sent before an acknowledgement is


expected.

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 20


Lost segments

 Send bytes 1 to 2999


 Receive 1 to 2999, send ACK 3000
 Send bytes 3000 to 4999
 Receive 3000 to 3999, send ACK 4000
(bytes 4000 to 4999 were lost)
 Send bytes 4000 to 5999
 Lost segments are re-sent.
 If no ACK – send them all again

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 21


Flow control

 The initial window size is agreed during the three-way


handshake.
 If this is too much for the receiver and it loses data (e.g.
buffer overflow) then it can decrease the window size.
 If all is well then the receiver will increase the window
size.

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 22


Comparison of TCP and UDP

 Both TCP and UDP use port numbers


 Both split up application data if necessary
 TCP sets up a connection
 TCP uses acknowledgements and re-sends
 TCP uses flow control
 TCP can re-assemble segments in the right order if
they arrive out of sequence
 UDP has less overhead so is faster

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 23


Summary
 Hierarchical Design model addresses performance,
scalability, maintainability & manageability issues.
 Traffic Analysis is used to monitor network
performance.
 Hierarchical Design Model is composed of 3 layers:
Access
Distribution
Core

 Switches selected for each layer must meet the needs


of each hierarchical layer as well as the needs of the
business.

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 24


Labs & Activities

Type Detail
PT 1.2.4 Mandatory*
Lab 1.3.1 Mandatory
PT 1.3.2 Mandatory
Lab 1.3.3 Review carefully

* If no previous Packet Tracer experience, else strongly recommended

© 2006 Cisco Systems, Inc. All rights reserved. Cisco Public 25

You might also like