JOB HAZARD ANALYSIS

Project in charge : Engr. Perk Oasan

Contractor: Oasan Development & Construction Location of Work: PMFTC – Batangas Plant Contact No : 0920-507-2075
Corporation (Water Teatment Building)
Safety Officer: Engr. Perk Oasan
Project :Clarke Engine Pump Rehabilitation Reviewed BY: Mr. Ralby Segura Contact No: 09205072075

JOB ACTIVITY POTENTIAL HAZARD POTENTIAL IMPACT CONTROL MEASURES

 Applicant, authorizing, approval signatories

 Failure will cause damage to  Unauthorized and
be familiar with the job.
equipment and personnel incompetent personnel to do
 Competent personnel to perform the task
1. Prepare Permit to injury. work (physical Injury, Damage
Work ( PTW)
being identified.
equipment, Damage property).
 PTW to be displayed at work site.
 Unorganized and unplanned
 Method statement of work to be approved
work will expose personnel to
before commencing of work.
hazard.
 All personnel should attend EHS & S
orientation.

 Obstructions  Personal Injury  Toolbox meeting to be conducted prior start of

 Damage Equipment work.
 Damage Property  Check access way to area is accessible for the
prior mobilization.
 Clear and remove all objects obstructing the
2. Mobilization of path.
equipment/ tools and
materials  Collision with personnel and .
 Personal Injury  Personnel to be vigilant and alert during
equipment mobilization
 Neat and proper arrangement of equipment.

 Lost control of vehicle due to  Personal Injury  Driver must observe speed and follow 10 KPH.
poor accessibility.  Damage Equipment  Park vehicle at designated location.
 Damage Property  Check route

 Fatigue  Personal Injury (Body)  Pace yourself. Take breaks.

JOB HAZARD
ANALYSIS
1
 JOB HAZARD ANALYSIS
Project in charge : Engr. Perk Oasan
Contractor: Oasan Development & Construction Location of Work: PMFTC – Batangas Plant Contact No : 0920-507-2075
Corporation (Water Teatment Building)
Safety Officer: Engr. Perk Oasan
Project : Clarke Engine Pump Rehabilitation Reviewed BY: Mr. Ralby Segura Contact No: 09205072075

JOB ACTIVITY POTENTIAL HAZARD POTENTIAL IMPACT CONTROL MEASURES

 Slips, Trips  Personal Injuries (Body, Head,  Inspect the area immediately around the load
 Crush Injury Foot) and the route for clearance and tripping
hazards.
 Clear movable objects from the route
 Check for uneven terrain.
 Clean up spills that could affect foot traction.
 Grip the object firmly. Do not pinch object
between your thumb and forefinger.
 Wear Gloves to improve grip.
 Back Injury  Personal Injury (Body)  Size up the load before you lift. If the load is too
big or awkward:
- Divide load up
- Ask for help or buddy
- Use Mechanical assist device such as trolley or
jack pallete.
 Do not twist your body while lifting.
 Squat down, bending your knees. Keep your
back straight and upright.
 Grip the object firmly and pull it close to you.
 Tighten your abdomen.
 Perform a reverse stretch. That means stretch
 Repetitive Motion Injury  Personal Injury (Body)
in the opposite direction of the work you are
doing. Reverse stretches help body to return to
neutral posture

JOB HAZARD
ANALYSIS
2
 JOB HAZARD ANALYSIS
Project in charge : Engr. Perk Oasan
Contractor: Oasan Development & Construction Location of Work: PMFTC – Batangas Plant Contact No : 0920-507-2075
Corporation (Water Plant Building)
Safety Officer: Engr. Perk Oasan
Project :Clarke Engine Pump Rehabilitation Reviewed BY: Mr. Ralby Segura Contact No: 09205072075

JOB ACTIVITY HAZARD EFFECT CONTROL MEASURES

 Dropping/Crush  Damage properties  Check sling, shackles, chains capacity.
 Damage equipment  Use proper and right capacity of tools and
 Physical injuries equipment (chain hoist, Sling, shackles)
3. Moving Engine pump to  Personnel away from the equipment during
destination and positioning lifting
 Use proper PPE’s (safety shoes, hardhat,
gloves, ear plug)
 Trip and fall due to poor  Physical Injuries (Body, Foot, arm)  Provide proper illumination by means of
illumination portable lights.

 Physical Injuries (arm, eye,  Use proper tools for right job.
 Use of Improper Tools  Use required PPE’s (Safety shoes, Hard hat,
4. Re-installation of pump body, head)
(Tightening of base nuts Coverall hand gloves, eye glass, Ear plug)
and screws)
 Poor communication  Physical Injuries (arm, eye,  Conduct toolbox meeting before start of
body, head) work.
 Proper supervision
 Use of Improper Tools  Physical Injuries (arm, eye,  Use proper tools for right job.
body, head)  Use required PPE’s (Safety shoes, Hard hat,
Coverall hand gloves, eye glass, Ear plug)
 Check valves and make sure no leaks before
5. Pipe-reconnection
reconnection.
 Pinch  Physical Injuries (arm, eye,  Pipe fit-up to be done by Pipe fitter.
body, head)  Use proper tools and PPE’s

 Water/ Diesel spill causing  Physical Injuries (arm, body,  Check all valves / Leaks before start of work.
head)
JOB HAZARD
physical hazard ( Inhalation,
slips)
Make sure it is closed.
 Wear proper PPE ‘s PPE ( Nose Mask, Safety
ANALYSIS shoes, Hard hat, Earplug).

3
 JOB HAZARD ANALYSIS
Project in charge : Engr. Perk Oasan
Contractor: Oasan Development & Construction Location of Work: PMFTC – Batangas Plant Contact No : 0920-507-2075
Corporation (Water Treatment Building)
Safety Officer: Engr. Perk Oasan
Project :Clarke Engine Pump Rehabilitation Reviewed BY: Mr. Ralby Segura Contact No: 09205072075

JOB ACTIVITY HAZARD EFFECT CONTROL MEASURES

 Trip wire  Physical Injuries (arm, eye,  Proper coordination with involve personnel.
body, head)  Follow LOTO procedure.
6. Electrical Supply re-  Damage Equipment  Only certified electrician do the work.
connection (tapping)  Proper coordination with involve personnel.
 Electric Shock / Electrocution  Physical Injuries (arm, eye,
body, head).  Follow LOTO procedure.
 Only certified electrician do the work.
 Pipe connection leakage  Physical Injuries  Double check all pipe connections and make it
 Damage equipment sure it is tightened.
 Wear Proper PPE’s (safety shoes, hardhat,
earplug, safety goggles.)
 Make sure all personnel involved for testing
followed the testing procedure.
7. Testing & Commissioning
 Trip/Fire  Damage Equipment  Proper coordination with involve personnel.
 Damage Property  Follow LOTO procedure.
 Only certified electrician do the work.
 Double check wire connection on power supply
to engine pump main controller.

 Poor housekeeping  Physical Injuries  Ensure the work place is maintained clear
 Polluted area of debris, waste and other rubbish and
8. Post Work  Slip/trip make the place clean and tidy .
 Protruding  Cleaning up all oil/water/diesel spills.
 Remove all materials from access way.

JOB HAZARD
ANALYSIS
4