ActiMux system in Solaris Urbino 4 generation
System diagnostic
www.actia.com
Diagnostic
Diagnostic session preparation
Local diagnostic mode
Remote diagnostic mode
Diagnostic options
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Diagnostic session preparation: requirements
Diagnostic session requirements:
Powered up bus with Acita multiplex electric system (batteries voltage> 23VDC)
Updated diagnostic tool with datas responding to the vehicle set up
Available remote mode diagnostic session – requirements:
Types of possible to use units:
– Computer (Windows®, Linux, MAC OS) with WiFi module
– Tablet with WiFi module
– Smartphone with WiFi module
Internet browser
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Diagnostic session preparation: updating
If S-Diag software is not updated:
Connect memory stick (USB) to computer
In main Memory stick folder create sub folder with name „MAJ”
from french language„mise à jour” (update)
Into created folder copy pack of content with updating data:
Below an example of correct content:
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Diagnostic session preparation: updating
Turn ON S-Diag and connect memory stick
Run S-Diag and follow screen recommendation
Remove memory stick out of S-Diag after comment – tool wil restart.
Ensure to take memory stick out of S-Diag after updating.
If S-Diag is run with memory stick in and you don’t want to update it choose „No” at the first incomimg
question on the screen „Are you sure you want to RAZ the tool?”
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Diagnostic session preparation: updating
Configuration window should apear automaticaly after restarting S-Diag. If not follow steps below:
After RunningS-Diag click
Choose configuration icon
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Diagnostic session preparation: updating
Choose language and set up date and time, then click on
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Diagnostic session preparation: updating
Main configuration menu will apear
Ethernet network configuration WiFi configuration
Server configuration\ Save changes
Not used
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Diagnostic session preparation: updating
Ethernet network configuration
Mark field„Network configuration DHCP”
IP „192.168.128.94
Mask: „255.255.255.0”
IP gateway: „192.168.128.249”
Confirm changes
Cancel changes
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Diagnostic session preparation: updating
WiFi configuration
Choose switch off option acces point connection
Choose switch on option acces point
Mark field„Network configuration DHCP”
IP : „192.168.6.1”
Mask : „255.255.255.0”
IP gateway: „192.168.2.1”
Type name SSID, np. „SDIAG-000025”
Choose open mode – no protection key
Confirm changes
Cancel changes
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Diagnostic session preparation: updating
If vehicle data are not updated in S-Diag:
Connect memory stick (USB) to computer
In main folder copie file „MAJ.zip”
from french language „mise à jour” (update)
If there is also Podium 2 update file available copie it to „FLASH” folder
Below an example of correct content:
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Diagnostic session preparation: updating
After S-Diag running click
Click on updating button
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Diagnostic session preparation: updating
Connect memory stick to S-Diag and click on
When below screen appear take memory stick out and click on
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Diagnostic session preparation: updating
S-Diag will be restarted. Click „OK” on the screen after
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Diagnostic session preparation: connections
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Diagnostyka
Diagnostic session preparation
Local diagnostic mode
Remote diagnostic mode
Diagnostic options
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Local mode - launching
After running S-Diag click on
Choose local session button
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Local mode - launching
List of main available componets will appear on the screen. Choose one to connect and click on
List of all componets in choosen computer will appear. Choose the one you want to diagnose and click on
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Local mode – main screens
Local diagnostic session menu will appear:
Main computer software information IN and Out status
Software loading to the main
In and Out control
computer
Parameter importing to main DTC Faults information
computer Not used in Solaris
Read and change main computer
parameters
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Diagnostic
Diagnostic session preparation
Local diagnostic session
Remote diagnostic session
Diagnostic options
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Remote mode - launching
After running S-Diag click on
Choose remote session
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Remote mode - launching
From the level of remote tool (Computer, tablet, smartphone …), Connect to WiFi network generated by S-
Diag or by Ethernet cable
Default network name is: „SDIAG-xxxxxxx”
where „xxxxxxx” is the end of S-Diag serial no
ex. „SDIAG-0000025”
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Remote mode - launching
It is possible to scan QR code by remote tool
If not possible to scan QR code click and type web address into browesr
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Remote mode - launching
On the remote tool screen list of available computers will
appear. Choose one to connect
Next list of available components in
choosen computer will appear. Choose one
and click „Confirm”
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Remote mode – main screen
Remote diagnostic session menu will appear:
Main computer software information Parameter importing to main
computer
Software loading to the main IN and Out status
computer
DTC Faults information In and Out control
Not used in Solaris
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Diagnostic
Diagnostic session preparation
Local diagnostic session
Remote diagnostic session
Diagnostic options
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Program name reading
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Inputs/Outputs reading
List of available Inputs and Outputs
Arrow clicking will swipe to next IN/Out:
It can appear a couple of lines regarding one signal
for example information on/of or value
To see a couple of signals in dynamic time:
Choose signals
Click on to see following screen
To retourn to static view of all signals click on
In dynamic mode it is possible to see 10 signals.
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Inputs/Outputs reading
Modul name
Signal name (regarding Actia documentation)
Variable name
Signal status
Pin of the signal
Signal description (Solaris decribed it)
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Inputs/Outputs reading
Fault presence
Additional informations
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Inputs/Outputs control
List of all inputs and outputs, choose the signal and click on it
Arrow clicking will swipe to nex signals
Signal value change – virtual keyboard can appear
Click on to introduce changes
Dependly of choosen signals the screens can be different
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Inputs/Outputs control
Signal additional informations
Modul name
Signal name (regarding Actia documentation)
Variable name
Signal value (on./off./value/etc…)
Pin of the signal
Signal description (Solaris decribed it)
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Inputs/Outputs control
Dynamic mode
Click the buton after signal chossing
In dynamic mode it is possible to see 10 signals.
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Inputs/Outputs control
Click twice on choosen signal to control
On./ off.
Direction (bridge and half bridge)
Value (if available tor the signal)
Confirm
Cancel
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Inputs/Outputs control
Click on to leave dynamic mode
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Reading and changing parameters
All parameters view – use arrows to Choose parameter to change the
change value
EEPROM parameters value save by clicking on
New value introduction to the parameter
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Parameters exporting
Parameters exporting in „xml” file
Choose export menu
Connect memory stick to S-Diag where is already created forder „\CONF” and click
Disconnect memory stick of S-Diag
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Parameters importing
Click on parameters import button
After requested connect memory stick to S-Diag where already is copied
configuration file in „\CONF” folder
Choose the file from parameters
Confirm parameters loading
Click on to restart computer with new parameters
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Default parameters loading
Default parameters loading
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Program parameters
Verify if parameters reading was successfull
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Program parameters
Click on the parameters value to change it
Click on to save changes
Click on to restart computer with new parameters
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Parameters exporting
Connect memory stick with „\CONF” folder to S-Diag and click on
Ensure that export was done successfully
Disconnect memory stick of S-Diag
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Parameters importing
Click on import button
After requested connect memory stick with configuration file in folder „\CONF” to S-Diag
Choose paramerets file
Confirm parameters loading
Click on to check loaded parameters value
Click on to restart computer with new parameters
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Software loading
If requested connect memory stick to S-Diag and click
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Software loading
Choose loading file
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Software loading
Main computer is in loading process
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Software loading
Main computer has been reprogramed
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Software loading
Connect PC to Podium 2 by Ethernet cable
Run Telemux Ethernet software
Click on „Network config” to set up connection
Choose the connection of network card where main
computer is connected
Check if the data has been automaticaly changed as
following
Click on „OK”
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Software loading
Click on „Look for ECUs”
After discovering main computer
Appear unit with name „MULTIC2/PODIUM Std200, 169.254.50.3, 0x0062”
Click on„Connect”
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Software loading
Choose quantity of files to be loaded
– 1 file
ex. wiring, logic, MMI, or all in one file
– 2 files
ex. Wiring and logic in separated files
Search and choose files to load
Launch loading process
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
Thank you
© 2017 ACTIA – System ActiMux w pojazdach Solaris Urbino 4-ej generacji
