HW Repair Guide SM-G7102

( Galaxy Grand 2)

Service Excellence Beyond Imagination SWA-CS Content Innovation

 NOTICE
1. All functionality, features, specifications and other product information
provided in this document including, but not limited to, the benefits, design,
pricing, components, performance, availability, and capabilities of the product are
subject to change without notice or obligation. Samsung reserves the right to
make changes to this document and the product described herein, at anytime, with
out obligation on Samsung to provide notification of such change.

2. In data of our company, important management / technical information is

included, and if it is leaked, loss can happen in various aspect such as closing a
technology gap, increasing ability to respond. Therefore, it is strictly prohibited from
information leak or forwarding this material, and if leak of management / technical
information due to disobeying the law happens, it can be severely punished in
accordance with information protection rule of our company.

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Contents
1. Introduction of GRAND2 3G

2. Service Guide
• RF calibration
• IMEI writing
• Boot Recovery

3. Repair Guide
• Assembly & Disassembly
• Electronic Components
• SMD parts
• Trouble Shooting

4. Q&A

Service Excellence Beyond Imagination SWA-CS Content Innovation

Introduction of GRAND2 3G (1/3)
Specification

Item Specification
AP One chip solution
CP MSM8226 A7 Cortex Quad Core @ 1.2GHz

OS Android 4.3 (Jelly Bean MR2)

Memory 8GB (eMMC) + 1.5GB (LPDDR2, POP)
Display 5.25” HD (TFT)
Camera 8M AF + LED Flash, 1.9M FF
Sensor Proximity, Light, Accelerometer, Hall Sensor
FM Radio O
Connectivity BT4.0, WiFi a/b/g/n
GPS A-GPS + GLONASS
Battery 2600mA
Speed HSPA+ 21Mbps

Service Excellence Beyond Imagination SWA-CS Content Innovation

Introduction of GRAND2 3G (2/3)
Features

Optimal Wide View Smart Service for Smart Life

• Satisfying Viewing Experience • Entertaining and Fun
• Maximize Every Inch • Refined Usability

1. Optimized for Media playing 1. Premium Experience

 16:9 HD display  S View Cover
 Perfect Ratio for Movie  Perfect Ratio for Movie

2. Big Screen Experience 2. Fun

 Larger Viewing Area  Sound & Shot
 Clearer  Group Play
 S Translator
3. Easy Multi Tasking
 Story Album
 Multi Window & Easy Sharing

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Introduction of GRAND2 3G (3/3)
Galaxy Grand Category Galaxy Grand2
5.01” TFT Lager and High Resolution Display 5.25” TFT
WVGA (800 x 480) HD (1280 x 720)

8M w/LED Camera 8M w/LED, BIS,

Zero Shutter Lag

Broadcom Capri Qualcomm

Application Processor
ARM Coretex-A9 MSM8226
Dual 1.2GHz ARM Coretex-A7
Quad 1.2GHz

2100mAh Battery 2600mAh

GFF Slim TSP Slim GFF

1GB DDR2 1.5GB DDR2

Memory
8GB eMMC 8GB eMMC

2G EDGE Rx Quad 2G EDGE Rx Quad

3G HSPA+ 21Mbps Network 3G HSPA+ 21Mbps
Triple (1,2,8) Quad(1,2,5,8)

Service Excellence Beyond Imagination SWA-CS Content Innovation

 RF calibration (1/2)

★ For GRAND2(SM-G7102), new IF cable should be used for IMEI writing and Calibration.
(Detailed information : Refer SVC Bulletin (12-37) New IF Cable Guide.)

1. Run Baroserver program.

- Extract “BaroServer_Ver_1.0.6.zip” and Run “setup.exe”
- Click Next to install the program. Run BaroServer Launcher at the desktop.
- Enter ‘Assistant Server IP’, same as ‘Host Server IP’.
- Check SVC Only (5555) option and input password.
- Click ‘START’ button and check if “Running” message appears.

Service Excellence Beyond Imagination SWA-CS Content Innovation

 RF calibration (2/2)
2. Run Calibration program
Category Filename Remark
Launcher DASEUL_Launcher_v3.0.20.exe
DASEUL_CAL_ALL_Runtime_3.1.93.0_r00061.CAB Folder Name : SM-G7102
Runtime file
or later version (under Launcher folder)

SM-G7102_COMMON(CSC)_IMEI_Ver_3.1.92.0.CAB or Folder Name : SM-G7102

Model File
later version (under Launcher folder)

Service Excellence Beyond Imagination SWA-CS Content Innovation

IMEI Writing (1/4)
★ For GRAND2 3G(SM-G7102), new IF cable should be used for IMEI writing and Calibration.
(Detailed information : Refer SVC Bulletin (12-37) New IF Cable Guide.)

1) Run Daseul Program for IMEI Writing

Category Filename
Launcher DASEUL_SVC_
Launcher_v3.0.20.exe
Runtime DASEUL_IMEI_ALL_Runtime_
File 3.1.93.0_r00074.CAB or later version
Model File SM-G7102_COMMON(CSC)_
IMEI_Ver_3.1.92.0.CAB or later version

Service Excellence Beyond Imagination SWA-CS Content Innovation

IMEI Writing (2/4)
2) Select MODE as ‘Service’, Model folder as ‘SM-G7102’,check IMEI option and click
System Setting button.

3) Check ‘IMEI Write’ and ‘IMEI Check’ option, and click ‘IMEI SVC & Repair Option’ to
check ‘SVC’ option.

Service Excellence Beyond Imagination SWA-CS Content Innovation

IMEI Writing (3/4)
4) Click ‘Hardware Config’ option.
5) Click ‘Port Setting’ in the phone option, and select correct port for IMEI writing.
6) Click Save and OK to enter IMEI writing program.

Service Excellence Beyond Imagination SWA-CS Content Innovation

IMEI Writing (4/4)
7) Enter IMEI number and click ‘Apply’ button.
8) Click ‘Model Info’ button and input ‘SKU_CODE’ and ‘BUYER’,then click Save.
※ SKU_CODE can be found in HHPsvc > ESN/IMEI Review
9) Click ‘Start’ button and Input ‘User ID’ and ‘Password’.
10) Click ‘Login’ button and connect the phone to Anyway JIG.

Service Excellence Beyond Imagination SWA-CS Content Innovation

Boot Recovery

Emergency download
mode & Odin T-Flash
mode

Service Excellence Beyond Imagination SWA-CS Content Innovation

Boot Recovery (1/6)
Brief Process
1) Preparing SD card, using working GRNAD2 3G (Samsung Method)
2) Inserting the SD Card to “eDL mode "phone for recovering.
3) Downloading the boot loader file to the defective phone,
and Flash Full S/W ( Pit, BL,AP, CP, CSC)

Pre-requisite
1) 1 Working GRAND2 3G phone ( Consisting of T Flash Enabled Binary )
2) External SD card ( Memory Size should be 8GB or bigger)
3) [SD card size should be more than the PIT file, Else the repartitioning of PIT file will fail]
4) Odin3 v3.07.exe and Odin3.ini
5) Latest PIT and Boot loader file

Service Excellence Beyond Imagination SWA-CS Content Innovation

Boot Recovery (2/6)
EDL mode verification
Device not booting up
Confirming a device is in Emergency Download mode (eDL mode).
1) Attach the faulty device to Windows PC
2) Go to Device Manager
3) You should able to see below item in Ports.

Service Excellence Beyond Imagination SWA-CS Content Innovation

Boot Recovery (3/6)
Insert External SD Card to normal phone to copy Boot loader to SD card
Go to download mode (Vol Dn + Home Key + Power, Vol Up)
Run Odin3 v3.07.exe with options enabled as shown
Click on start button to download the binary into SD Card.

Service Excellence Beyond Imagination SWA-CS Content Innovation

Boot Recovery (4/6)
Use the SD card to recover a device going to eDL mode.
Plug in the SD Card on to the device which is in eDL mode.
Remove the Battery and put it back.
make it to download mode with Volume Down + Power key and press Home key

Service Excellence Beyond Imagination SWA-CS Content Innovation

Boot Recovery (5/6)
Flash the Latest Pit and Boot loader on to the device ( as shown below )

Service Excellence Beyond Imagination SWA-CS Content Innovation

Boot Recovery (6/6)
Now remove the SD Card from Faulty device.
Go to download mode (Vol Dn + Home + Power Key, Vol Up)
Select all the binaries ( Pit, BL, AP, CP, CSC ) in Odin.
Click on Start button to download

Service Excellence Beyond Imagination SWA-CS Content Innovation

Disassembly & Assembly Instruction

Disassembly & Assembly

Instruction

Service Excellence Beyond Imagination SWA-CS Content Innovation

Disassembly & Assembly Instruction
Disassemble Instruction

1) Disassemble LCD connector protect cover.

※ Caution
1) Be careful of scratch and molding damage.

2) Separate the LCD connector.

※ Caution
1) Be careful of scratch and molding damage.
2) Be careful of damage to the FPCB.

Service Excellence Beyond Imagination SWA-CS Content Innovation

Disassembly & Assembly Instruction
Disassemble Instruction

3) Displace the temperature chamber for 10 minute

Detach the TSP/LCD Assay using Vaccum jig

AIR pressure
5~7 kgf/cm

※ Caution
1) Before disassembling, Use heating chamber.
2) Be careful of scratch and molding damage.

Service Excellence Beyond Imagination SWA-CS Content Innovation

Disassembly & Assembly Instruction
Disassemble Instruction

4) Unscrew the 10 points.

※ Caution
1) Be careful of scratch and molding damage.

Service Excellence Beyond Imagination SWA-CS Content Innovation

Disassembly & Assembly Instruction
Disassemble Instruction

5) Detach the PBA/Sheildcan Assay.

※ Caution
1) Be careful of damage to the EARJACK
Module.
2) Be careful of damage to the CAMERA.

Service Excellence Beyond Imagination SWA-CS Content Innovation

Disassembly & Assembly Instruction
Disassemble Instruction

6) Disassemble the RCV, Sensor, SPK from PBA.

Unscrew the 2 points.

※ Caution
1) Be careful of damage to RCV.
2) It pushes this part at disassembly, and lift it

Service Excellence Beyond Imagination SWA-CS Content Innovation

Disassembly & Assembly Instruction
Disassemble Instruction

7) Separate the VGA, MEGA Camera from PBA Array.

※ Caution
1) Be careful of damage to the TSP FPCB.

Service Excellence Beyond Imagination SWA-CS Content Innovation

Disassembly & Assembly Instruction
Disassemble Instruction

8) Separate the Top dummy, Bottom dummy &

Speaker from hook.

※ Caution
1) Be careful of scratch and molding damage.
2) Be careful of damage to the TSP & LCD.

Service Excellence Beyond Imagination SWA-CS Content Innovation

Disassembly & Assembly Instruction
Assemble Instruction

1) Assemble the Top dummy, Speaker on shield can.

※ Caution
1) Be careful of damage to the part.

Service Excellence Beyond Imagination SWA-CS Content Innovation

Disassembly & Assembly Instruction
Assemble Instruction

2) Assemble the PBA on Shieldcan.

Screw the 2 points..

※ Caution
1) Be careful of damage to the part.

Service Excellence Beyond Imagination SWA-CS Content Innovation

Disassembly & Assembly Instruction
Assemble Instruction

3) Assemble PBA assay to the Rear

Assemble Bottom dummy on the Rear

※ Caution
1) Be careful of damage to PBA

Service Excellence Beyond Imagination SWA-CS Content Innovation

Disassembly & Assembly Instruction
Assemble Instruction

4) Remove the TSP tape

(in case of replacing the new TSP module)

※ Caution
1) Be careful of damage to each module.

5) Attach the TSP tape

(in case of replacing the new TSP module)

Service Excellence Beyond Imagination SWA-CS Content Innovation

Disassembly & Assembly Instruction
Assemble Instruction

6) Screw the 10 points of the Rear.

1.2 ± 0.1 Kgf/㎠.

※ Caution
1) Be careful of scratch and molding damage.

Service Excellence Beyond Imagination SWA-CS Content Innovation

Disassembly & Assembly Instruction
Assemble Instruction

7) Attach the LCD assay to the Rear Assay.

8) Assemble LCD connector.

※ Caution
1) Be careful of scratch and molding damage.

Service Excellence Beyond Imagination SWA-CS Content Innovation

Disassembly & Assembly Instruction
Assemble Instruction

9) Assemble LCD connector protect cover.

※ Caution
1) Be careful of scratch and molding damage.

Service Excellence Beyond Imagination SWA-CS Content Innovation

Disassembly & Assembly Instruction
Assemble Instruction

10) Press the set using pressure jig.

※ Caution
1) - Pressure : 5~6 kgf/cm2
- Press time : 9.7 sec .

Service Excellence Beyond Imagination SWA-CS Content Innovation

Electronic Components

Electronic
Components

Service Excellence Beyond Imagination SWA-CS Content Innovation

Electronic Components (1/2)

Ear Jack

SPK Module

GH96-06683A

SIM card socket

+ Micro SD card socket
Shield Can (for RF performance)

8M
CAMERA

GH96-06731A

Front Camera
Motor(for Vibration)

GH31-00669A GH96-06728A

Service Excellence Beyond Imagination SWA-CS Content Innovation

Electronic Components (2/2)

LCD Connector

Receiver
Touch key
connector

Proximity Sensor
Home key
contact
GH59-013770A

Service Excellence Beyond Imagination SWA-CS Content Innovation

 SMD parts (TOP side)
U502 1205-004833 HDC602 3708-003167
AUDIO CODEC Connector(8M CAM)

TAC500,501,502 3404-001487 U608 1203-008056

Tact key Backlight Driver IC

U201 1205-004825 U601 1203-007869

BT/WIFI/FM Module Panel power supplier
OSC200 2801-005323 UME300 1107-002283
Oscillator - 48Mhz eMMC

U205 1209-002151 U402 1205-004513

Accelerometer Sensor Load Switch
U202 1009-001058 U404 1001-001822
HALL IC uUSB Switch IC
OSC400 2801-005300 UCP300 1205-004931
Oscillator – 19.2Mhz AP
U401 1203-008057 UCP300UP 1105-002540
PMIC LPDDR2(POP)
ANT500, ANT501 3712-001490 BTC400 3711-008587
Motor contact Battery Contact
ANT502, ANT503 3712-001490 U602 1203-004776
Home key contact Motor LDO
IFC400 3722-003708 MIC500 3003-001188
Interface Connector(Micro USB) Mems mic.

Service Excellence Beyond Imagination SWA-CS Content Innovation

SMD parts (Bottom side)
HDC601 3711-007467 HDC500 3711-007478
Connector(1.9M CAM) Receiver/Proxy sensor connector

HDC600 3711-007883 Ant200 3712-001490

LCD Connector Ant. Contact (for GPS)
U200 1201-003631
U102 1205-004829 GPS LNA(Low Noise Amp.)
2G/3G Transceiver
Ant200 3712-001473
U101 1201-003701 Ant. Contact (for BT/WIFI)
Band1/Band 8 PA
HDC501 3711-007478
U106 1201-003699 SPK & Earjack connector
2G PA/TX Module
LED600 0601-003364
U101 1201-003702 Flash LED
Band2/Band 5 PA
SIM601 3709-001829
RFS100 3705-001731 Sim1+Micro SDcard socket
RF Switch
SIM600 3709-001799
Sim2 card socket

ANT101 3712-001490
Main ANT connector

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Troubleshooting

Troubleshooting

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Power problem
Step Check point Result value Defect point

1 Confirm the defect symptom - -

Solved Battery
2 Check the power with a new battery
Not solved Go to the next step

High current (over than 1A) Circuit short

Check the PBA current with a power supply Low current S/W download
3
(power supply voltage : 3.8 ~ 4.0V) Normal current Display or Power key

No current (almost 0mA) Go to the next step

C425 = 3.8V
Go to the next step
4 Check the Vbatt(+point) of battery contact (same as power supply voltage)

If not the correct value PMIC (U401)

C484,C485 = 1.15V
C466 = 1.3V
Check the voltage of following chips Go to the next step
5 C467 = 2.1V
(C561,C558,C556,C559,TP(AP_PS_HOLD)) R420 (MSM_PS_HOLD) > 1.8V

If not the correct value PMIC (U401)

19.2MHz Main chip (UCP300)

6 Check the frequency of OSC400
If not the correct value X-tal (OSC400)

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Power problem

Step 4,5,6

OSC400

C466 = 1.3V

C467 = 2.1V
R420 > 1.8V
PMIC

C425 = 4.0V
Step5

Vbatt

C484 = 1.15V

C485 = 1.15V

Service Excellence Beyond Imagination SWA-CS Content Innovation

 RF (GSM,WCDMA)
Step Check point Result value Defect point

Confirm the defect symptom

1
(Make a call, check the debug screen *#0011# )
- -

Abnormal Settings
Check the settings
2
(airplane mode, Mobile networks)
Normal Go to the next step

Broken, dust, corrosion

Main ant
No insert
3 Check the status main ANT
Normal Go to the next step

Power on with a power supply

4 - -
(power supply voltage : 3.8V)

Check the status(crack, missing, Corrosion..etc) Abnormal status

of RF components. RF components.
(compared with a good PBA)

ANT101 (ANT contact)

U106 (Tx module, PAM)
5 U101 (B1,B8 PAM)
F102,F104 (B1,B8 DUF) Normal status CP(Call Processor)
U104 (B2,B5 PAM) (compared with a good PBA) (UCP300)
U610,F105 (B2,B5 DUF)
F101(Saw Filter)
U102 (Transceiver)

Service Excellence Beyond Imagination SWA-CS Content Innovation

 RF (GSM,WCDMA)
Step2

CHECK SETTINGS

CHECK SIM card & DEBUG SCREEN STATUS

SOCKET STATUS Same value compared with
normal device.

Service Excellence Beyond Imagination SWA-CS Content Innovation

 RF (GSM,WCDMA)
Step3

Ant101 3712-001490
ANT. Contact (for main RF)

Main ANTENNA

Main ANTENNA contact

Service Excellence Beyond Imagination SWA-CS Content Innovation

 RF (GSM,WCDMA)
Step5

F104 2910-000215
B8 DUF

U101 1201-003701
U102 1205-004829 Band1/Band 8 PAM
2G/3G Transceiver

F102 2910-000229
U106 1201-003699 B1 DUF
2G PA/TX Module

U104 1201-003702
F105 2910-000227 Band1/Band 8 PAM
B1 DUF

U610 2910-000205
F101 2904-002136 B2 DUF
Saw Filter

Service Excellence Beyond Imagination SWA-CS Content Innovation

 BT/WIFI
Step Check point Result value Defect point

Confirm the defect symptom Turned on Go to the next step

1
(Check the turned on BT/WIFI & connected device) Turned off Turn on

Check the BT/WIFI Ant. & Ant contact. Broken, dust, corrosion Ant & ANT201
2
(Rear cover Ant. & ANT201) Normal Go to the next step
Power on with a power supply
3 - -
(power supply voltage : 3.8V)
C201 = 1.3V
Check the voltage of C201,C200,C222 C200 = 3.0V Go to the next step
4 C222 = 1.8V
Notice. It should be measured when the BT/WIFI
path is activated on If not the correct value PMIC (U401)

C203 = 48MHz
Check the clock of C203 (Same signal compared Go to the next step
5 Notice. It should be measured when the BT/WIFI is with a good PBA)
activated on
If not the correct value OSC200

Check the status(crack, missing, Corrosion..etc) of Abnormal status

RF components. (compared with a good RF components.
C238, L212, ,C237 (ANT Matching) PBA)
6
F201,F200,C228 (filter and filter matching)
Notice. It should be measured when the BT/WIFI BT/WIFI IC
If not the correct value
path is activated on (U201)

Service Excellence Beyond Imagination SWA-CS Content Innovation

 BT/WIFI
Step1

Step2

BT/ WIFI ANTENNA

CONTACT

BT/ WIFI ANTENNA

(FPCB TYPE)

Service Excellence Beyond Imagination SWA-CS Content Innovation

 BT/WIFI

Step4,5

C237
C200=1.3V
F201 ANT201
F200

C228
C238 L212
BT/ WIFI IC
U201
C201=1.3V
C222 = 1.8V
C203=48MHz

OSC200(48Mhz)

Service Excellence Beyond Imagination SWA-CS Content Innovation

 GPS/GLONASS
Step Check point Result value Defect point

Confirm the defect symptom Turned on Go to the next step

1
(Check the turned on GPS function) Turned off Turn on
ANT200
Check the status Antenna and GPS components. Broken, dust, corrosion
2 GPS component
- ANT200, C226, C233, L209, F202, C234, L205
Normal Go to the next step
Power on with a power supply
3 - -
(power supply voltage : 3.8V)
Check the voltage of C245 C245 = 2.75V Go to the next step
4
Notice. It should be measured when the GPS path
is activated on If not the correct value PMIC(U401)

Check the voltage of C241 C241 = 1.8V Go to the next step

5
Notice. It should be measured when the GPS path
is activated on If not the correct value AP(UCP300)

C156 = 19.2Mhz
Check the clock of C156 GPS IC(U102)
(Same signal compared with
GPS LNA(U200)
6 a good PBA)
Notice. It should be measured when the GPS path
is activated on If not the correct value OSC200

Service Excellence Beyond Imagination SWA-CS Content Innovation

 GPS/GLONASS
Step1

Service Excellence Beyond Imagination SWA-CS Content Innovation

 GPS/GLONASS
Step2

GPS
ANTENNA contact

Service Excellence Beyond Imagination SWA-CS Content Innovation

 GPS/GLONASS
Step4,5

ANT200

C226

C226
C234
F202
L205

U200[LNA]
C245
C241
C230

Service Excellence Beyond Imagination SWA-CS Content Innovation

 GPS/GLONASS
Step4,5,6

GPS IC(U102)

C156

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Speaker problem

Step Check point Result value Defect point

1 Confirm the defect symptom - -
Solved Setting error
2 Make a factory reset (*2767*3855#)
Not solved Go to the next step
Broken, dust, corrosion Speaker connector
3 Check the speaker connector (HDC501)
Normal Go to the next step
Solved speaker
4 Replace the speaker module (GH96-06683A)
Not solved Go to the next step

Connect a LCD, and power on with a power

5 supply - -
(power supply voltage : 3.8V)

Activate the speaker path

6 - -
(*#0*# → Speaker)

Check the signal of speaker contact Same signal compared with a

PBA
(C529,C530) good PBA
7
Notice. It should be measured when the
No signal Audio Codec (U502)
speaker path is activated on

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Speaker problem

Step3 Step4

Ear Jack connector

HDC501 SPK Module GH96-06683A

Speaker connector

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Speaker problem
Step7

Sound signal path

C529 C530

connector

U502
Audio Codec

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Display Problem

Step Check point Result value Defect point

1 Confirm the defect symptom - -

Broken, dust, corrosion LCD connector
2 Check the LCD connector Insert status (HDC600)
Normal Go to the next step
Solved LCD
3 Replace the LCD
Not solved Go to the next step
Connect a LCD and display on with a power
4 supply - -
(power supply voltage : 3.8V)
Check the voltage of C606 = 1.8V If not the correct value PMIC(U401)
5 Notice. It should be measured when the display is
activated on C606=1.8V Go to the next step

Check the voltage of C602 > 18V If not the correct value Back light IC(U608)
6 Notice. It should be measured when the display is
activated on C602>18V Go to the next step

Check the voltage of following chips U601(panel power

If not the correct value
(C607,C605) supplier)
7
Notice. It should be measured when the display is C607 = 5V
activated on MAIN CHIP
C605 = -1.5 ~ -5V

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Display problem
Step2,3,5,7 Step6

HDC600 R602

C605

C606
C602
C607

LCD power path from PMIC

LCD(include TSP) CONNECTOR

Step6

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Touch problem
Step Check point Result value Defect point
1 Confirm the defect symptom - -
LCD connector
Broken, dust, corrosion
2 Check the LCD connector (HDC600) (HDC600)
Normal Go to the next step
Broken, dust, corrosion TSP connector
3 Check the TSP connector on LCD module.
Normal Go to the next step
Solved TSP
4 Replace the TSP
Not solved Go to the next step
Connect a LCD and display on with a power
5 - -
supply (power supply voltage : 3.8V)

Check the voltage of following chips C604-> LDO(U605)

If not the correct value
(C604,C433) C433 -> PMIC(U401)
6
Notice. It should be measured when the C604 = 2.8V
display is activated on Go to the next step
C433 = 1.8V

Check the Signal of following chips If not the correct value R601,R602
(R601,R602)
7
Notice. It should be measured when the Same signal compared with a
display is activated on MAIN CHIP or PBA
good PBA

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Touch problem
Step3

Step2
TSP IC
C604
Step6,7

R601
R602

TSP
TSP power line CONNECTOR

LCD(include TSP) CONNECTOR

Step6

U401 PMIC
C433

TSP power line from PMIC

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Receiver problem

Step Check point Result value Defect point

Confirm the defect symptom

1 - -
(*#0*# → Receiver)
Solved Setting error
2 Make a factory reset (*2767*3855#)
Not solved Go to the next step
Broken, dust, corrosion connector
3 Check the receiver connector(HDC601)
Normal Go to the next step
Solved Receiver
4 Replace the receiver module (GH59-13770A)
Not solved Go to the next step
Connect a LCD, and power on with a power
5 supply - -
(power supply voltage : 3.8V)
Activate the speaker path
6 - -
(*#0*# → Receiver)

Same signal compared with a good

Check the signal of C524,C525 CP (UCP300)
PBA
7 Notice. It should be measured when the
Receiver path is activated on Audio codec
No signal
(U502)

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Receiver problem
Step3 Step7

Receiver connector

U502
Audio Codec

Step4

Receiver

C525
C524
Proximity Sensor
GH59-13770A

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Microphone problem

Step Check point Result value Defect point

1 Confirm the defect symptom - -

Dust Clean the hole
2 Check the microphone hole
Normal Go to the next step
Wrong insert Re-insert
3 Check the microphone rubber
Normal Go to the next step
Activate the speaker path
4 - -
(*#0283# → Packet Loopback ON)

Check the voltage of C501 1.8V Go to the next step

5
Notice. It should be measured when the
microphone path is activated on If not the correct value AUDIO CODEC(U502)

Same signal compared with a good

Check the signal of ZD509,ZD5510 Microphone
PBA
6
Notice. It should be measured when the
microphone path is activated on If not the correct value AUDIO CODEC(U502)

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Microphone problem
Step2,3

Microphone
Microphone
Rubber Holder

Step6

Microphone signal path

U605
Audio Codec

ZD509 ZD510

Service Excellence Beyond Imagination SWA-CS Content Innovation

SIM card detection problem

Step Check point Result value Defect point

1 Confirm the defect symptom - -

Broken, dust, corrosion SIM socket
2 Check the SIM socket & Connector
Normal Go to the next step

Power on with a power supply

3 - -
(power supply voltage : 3.8V)

Check the signal of R618 for SIM601(UIM1) 3V or 3V clock Go to the next step
R629 for SIM600(UIM2)
4
Notice. It should be measured when the phone Call Processor
is started If not the correct value
(UCP300)

Check the signal of SIM socket pin1 (C636) 3V SIM socket

(C640)
5
Notice. It should be measured when the phone
started If not the correct value PMIC (U401)

Service Excellence Beyond Imagination SWA-CS Content Innovation

 SIM card detection problem
Step 2
Step4

C640
R618
R629

SIM600
SIM601 [SIM card socket
+ Micro SD card socket]

Step5

C636

Service Excellence Beyond Imagination SWA-CS Content Innovation

 Q&A
Question

Service Excellence Beyond Imagination SWA-CS Content Innovation