100% found this document useful (1 vote)
761 views9 pages

HLD For Telkomsel 2300 8T8R 20181231 v1.0

Uploaded by

Arrival Hidayat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
761 views9 pages

HLD For Telkomsel 2300 8T8R 20181231 v1.0

Uploaded by

Arrival Hidayat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 9

HLD for Telkomsel TDD2300 8T8R Evolution

TELKOMSEL LTE Project 2017


Frequency Planning For 2300M

Frequency : TDD 2300M: 2300~2330Mhz

2.3GHz :

Telkomsel Smartfren 30MHz Released 10MHz Wifi


(30MHz) (30MHz) GP

TELKOMSEL LTE Project 2017


8T Soft Split Makes Resource Duplex

Soft Split Resource Duplex

Soft split was first introduced in eRAN TDD 11.1. Intra-


frequency soft split is a software-based TDD 6-cell solution,
and therefore can significantly expand cell capacity without
additional hardware, frequency spectrum, or sites.
HW Remark for 8T8R
8T8R RRU :
RRU
Antenna RRU3259 , RRU3279 , RRU3278, RRU5258
3 * 8T8R Cells 6 * 8T8R Soft Spilt Cells
Till eRAN13.1, only
UBBPd9 , UBBPe4 , UBBPe6 support 8T8R
8T8R RRU Benefit
soft split.
UBBP
UBBPd9/UBBPe4 support 6 soft split
BBU
• 3 sectors -> 6 sectors cells@SA2 ;
Weight Matrix Weight Matrix • Reuse the base station UBBPe6 support 12 soft split cells@SA2 ;
infrastructure ATD4516R5 ( DX-2300-2690-90-16i-M-R )
Sector 0- Sector 1- Sector 0- Sector 1–
Port1 Port1 Port0 Port0 Antenna ATD4516R8 ( DX-3300-3800-75-15.5i-M-R )
ATR4518R29v06

TELKOMSEL LTE Project 2017


Analysis on 2300 8T8R(with soft split) Evolution Part 1
RRU
1. If existing has L2300 4T4R,:

1) Before 2019Q1, please replace existing 4T4R RRU to 8T8R RRU5258.

2) After 2019Q1, add RRU3276 to combine with existing RRU to support 8T8R; and additional External Calibration Module(2019Q1 GA).

2. If existing site without L2300 4T4R, add 8T8R RRU5258.

3. Add Boost Voltage DC distribution box(with 2 BDU modules) to support RRU5258. One box can support 3 RRUs.

BBU:
4. If existing MPT is not UMPTb2/UMPTb9, change to UMPTb9 to support TDD.

5. Standalone UBBPe4 board for LTE2300 8T8R. 1*UBBPe4 support 3 x 20 MHz 8T8R LTE cells or 6 x 20MHz 8T8R soft split LTE cell. Add UBBPe4 if existing UBBP is not enough.

6. UPEU: 2 UPEUc or 1 UPEUd. If not meet, add 1 UEPUd

Antenna:
7. If existing site have 2 antennas per sector, one for 900 only, one for 1800/2100; Replace 900MHz antenna to be 12 port antenna ATR4518R29v06 to support 900+2300 8T8R for
future evolution.

8. In other case, add 9 port antenna to support 2300 8T8R only.

Cabinet
9. If existing site cabinet is ver.D or above, no need to change. If verA/B/C, suggest order new cabinet to replace existing cabinet.

TELKOMSEL LTE Project 2017


Analysis on 2300 8T8R(with soft split) Evolution Part 2
Power Cable
1) For RRU5258,

use 5.3mm^2 Power Cable when the length is 0~70m and 8.2mm^2 Power Cable when the length is 71~100m in standard pole scenario.

use 5.3mm^2 Power Cable when the length is 0~80m and 8.2mm^2 Power Cable when the length is 81~100m in long distance scenario.

2) For RRU3276,

use 3.3mm^2 Power Cable when the length is 0~60m and 5.3mm^2 Power Cable when the length is 61~100m in standard pole scenario.

use standard Power Cable solution for long distance scenario.

3) Other Auxiliary material follow standard RRU5258 auxiliary material solution.

Software Version
4) To support the soft split function, software version required is SRAN 13.1.

TELKOMSEL LTE Project 2017


2300 8T8R Solution ( 1/3 )
 Existing site without L2300
Consideration:
2 Antenna
2018 Limitation 2019 2018
FDD 2T3S TDD 8T8R FDD 2T3S FDD 2T3S TDD 8T8R

ATD4516R5
2*690-960/TDD 2300-3800MHz

900 1800 2100


900 2300 1800 2100 1800 2100 1800 2100 2300

2T2R 2T2R 2T2R


RRU5258 2T2R 2T2R 8T8R
2T2R 2T2R

5MHz@900MHz 5MHz@900MHz
5MHz@900MHz 5MHz@900MHz
15MHz@1800MHz 15MHz@1800MHz
15MHz@1800MHz 15MHz@1800MHz
5MHz@2100MHz 5MHz@2100MHz
5MHz@2100MHz 5MHz@2100MHz
30MHz@2300MHz
30MHz@2300MHz

1) Existing site without L2300, add RRU5258 for 8T8R. 1) Existing site without L2300, add RRU5258 for 8T8R.
2) Existing site with 2 antenna, change 900 antenna to 12 2) Existing site with 1 antenna only, add 9 port TDD smart
port TDD smart antenna ATR4518R29v06. antenna ATD4516R5.

TELKOMSEL LTE Project 2017


2300 8T8R Solution ( 2/3 )
 Existing site with L2300 4T4R
Consideration: Consideration:
FDD & TDD Dual beam TDD 8T8R FDD & TDD Dual beam
antenna can not Reuse antenna can not Reuse
2018 2019 because of PIM Issue 2018 2019 because of PIM Issue

FDD 2T3S FDD 2T3S FDD 2T3S


12 Ports 12 Ports 12 Ports 12 Ports
ATD4516R5 ATD4516R5

Module

900 1800 2100 2300 Gain 2.8x 900 1800 2100 2300
2300 900 1800 2100 2300 Gain 2.8x 900 1800 2100 2300
2300

2T4R 2T2R 2T2R 4T4R 2T4R 2T2R 2T2R 8T8R 2T4R 2T2R 2T2R 4T4R 2T4R 2T2R 2T2R 4T4R 4T4R

5MHz@900MHz 5MHz@900MHz 5MHz@900MHz 5MHz@900MHz


Consideration:
15MHz@1800MHz 15MHz@1800MHz 15MHz@1800MHz 15MHz@1800MHz 4T4R Migration to 8T8R
With External Calibration
5MHz@2100MHz 5MHz@2100MHz 5MHz@2100MHz 5MHz@2100MHz Module(With soft split)
30MHz@2300MHz 30MHz@2300MHz 30MHz@2300MHz 30MHz@2300MHz

1) Existing site with L2300, replace RRU3276 to RRU5258 1) Existing site with L2300, add one more RRU3276 to
for 8T8R. combiner to 8T8R. Add one more external calibration
2) add 9 port TDD smart antenna ATD4516R5. module.
2) add 9 port TDD smart antenna ATD4516R5.

TELKOMSEL LTE Project 2017


2300 8T8R Solution(3/3)
 Existing site with L2300 4T4R

2018 2018 2019


FDD 2T3S TDD 8T8R
8 Ports
6 sector 10 ports hybrid
8 Ports
ATD4516R5 beam ATD4516R5
AMB4519R2v06

1800 2100 2300 1800 2100 2300


2300 900 1800 2100 2100 2300
2300
900 1800 2100 2100

OR OR

2T2R 2T2R 4T4R 2T2R 2T2R 8T8R 2*4T4R 2T2R 2T2R 2T2R 2T2R
8T8R 2*4T4R
2T2R 2T2R 2T2R 2T2R

1) RRU: Existing site with L2300, replace 1) RRU: Existing site with L2300, replace RRU3276 to RRU5258 for
RRU3276 to RRU5258 for 8T8R. Or add one 8T8R. Or add one more RRU3276 to combiner to 8T8R, and add one
more RRU3276 to combiner to 8T8R, and add more external calibration module.
one more external calibration module.
2) Antenna: if existing U2100 has separate antenna for 6 sectors, need to
2) Antenna: add 9 port TDD smart antenna change to 10 port hybrid beam antenna for 900/1800/2100. And add 9
ATD4516R5. port TDD smart antenna ATD4516R5.

TELKOMSEL LTE Project 2017


Thank you

Copyright©2017 Huawei Technologies Co., Ltd. All Rights Reserved.


The information contained in this document is for reference purpose only, and is subject to
change or withdrawal according to specific customer requirements and conditions.

TELKOMSEL LTE Project 2017

You might also like