MPLS Tutorial

Peter Ashwood-Smith
Bilel N. Jamoussi
[email protected]
[email protected]
Tutorial Outline

• Overview
• Label Encapsulations
• Label Distribution Protocols
• MPLS & ATM
• Constraint Based Routing with CR-LDP
• Summary

2
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 “Label Substitution” what is it?
One of the many ways of getting from A to B:
•BROADCAST: Go everywhere, stop when you get to
B, never ask for directions.
•HOP BY HOP ROUTING: Continually ask who’s closer
to B go there, repeat … stop when you get to B.

“Going to B? You’d better go to X, its on the way”.

•SOURCE ROUTING: Ask for a list (that you carry with
you) of places to go that eventually lead you to B.

“Going to B? Go straight 5 blocks, take the next left, 6 more

blocks and take a right at the lights”.
3
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 Label Substitution

•Have a friend go to B ahead of you using one of the

previous two techniques. At every road they reserve a
lane just for you. At ever intersection they post a big sign
that says for a given lane which way to turn and what new
lane to take.

LANE#1 TURN RIGHT USE LANE#2

LANE#1

LANE#2

4
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 A label by any other name ...
There are many examples of label substitution
protocols already in existence.
• ATM - label is called VPI/VCI and travels with cell.
• Frame Relay - label is called a DLCI and travels with
frame.
• TDM - label is called a timeslot its implied, like a lane.
• X25 - a label is an LCN
• Proprietary PORS, TAG etc..
• One day perhaps Frequency substitution where label is a
light frequency?
5
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 SO WHAT IS MPLS ?

• Hop-by-hop or source routing

to establish labels
• Uses label native to the media
• Multi level label substitution transport

6
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 ROUTE AT EDGE, SWITCH IN CORE

IP IP #L1 IP #L2 IP #L3 IP

IP Forwarding LABEL SWITCHING IP Forwarding

7
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 MPLS: HOW DOES IT WORK
TIME UDP-Hello

UDP-Hello

TCP-open

Initialization(s)

Label request
IP

#L2
Label mapping
TIME 8
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
WHY MPLS ?

• Leverage existing ATM hardware

• Ultra fast forwarding
• IP Traffic Engineering
— Constraint-based Routing

• Virtual Private Networks

— Controllable tunneling mechanism

• Voice/Video on IP
— Delay variation + QoS constraints

9
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 BEST OF BOTH WORLDS

PACKET
HYBRID
CIRCUIT
ROUTING SWITCHING

IP MPLS ATM
+IP
•MPLS + IP form a middle ground that combines the best
of IP and the best of circuit switching technologies.
•ATM and Frame Relay cannot easily come to the middle
so IP has!! 10
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 MPLS Terminology

• LDP: Label Distribution Protocol

• LSP: Label Switched Path
• FEC: Forwarding Equivalence Class
• LSR: Label Switching Router
• LER: Label Edge Router (Useful term not in standards)

11
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 Forwarding Equivalence Classes
LSR LSR
LER LER

LSP

IP1 IP1
IP1 #L1 IP1 #L2 IP1 #L3
IP2 #L1 IP2 #L2 IP2 #L3
IP2 IP2

Packets are destined for different address prefixes, but can be

mapped to common path

• FEC = “A subset of packets that are all treated the same way by a router”
• The concept of FECs provides for a great deal of flexibility and scalability
• In conventional routing, a packet is assigned to a FEC at each hop (i.e. L3
look-up), in MPLS it is only done once at the network ingress
12
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
LABEL SWITCHED PATH (vanilla)
#14 #311
#216 #99 #311
#963 #311

#963
#14
#612 #462

#99 #311
#5

- A Vanilla LSP is actually part of a tree from

every source to that destination (unidirectional).
- Vanilla LDP builds that tree using existing IP
forwarding tables to route the control messages.
13
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 MPLS BUILT ON STANDARD IP
Dest Out
47.1 1
Dest Out 47.2 2
47.1 1 47.3 3
47.2 2
47.3 3
1 47.1
3
1 2
3
Dest Out
2
47.1 1
47.2 2
47.3 3
1
47.3 3 47.2

• Destination based forwarding tables as built by OSPF, IS-IS, RIP, etc.

14
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 IP FORWARDING USED BY HOP-
BY-HOP CONTROL
Dest Out
47.1 1
Dest Out 47.2 2
47.1 1 47.3 3
47.2 2
47.3 3
1 47.1
IP 47.1.1.1
1 2 IP 47.1.1.1
Dest Out 3
47.1 1 2
47.2 2
47.3 3 IP 47.1.1.1
1
47.3 3 47.2

2
IP 47.1.1.1

15
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 MPLS Label Distribution

Intf Label Dest Intf Label Intf Label Dest Intf

In In Out Out In In Out
3 0.50 47.1 1 0.40 3 0.40 47.1 1

1 47.1
3 Request: 47.1
3
Intf Dest Intf Label
In Out Out s t : 47.1 2
ue
3 47.1 1 0.50 Req 1
1 Mapping: 0.40
2
.50
47.3 3
p i ng: 0 47.2
p
2 Ma

16
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 Label Switched Path (LSP)

Intf Label Dest Intf Label Intf Label Dest Intf

In In Out Out In In Out
3 0.50 47.1 1 0.40 3 0.40 47.1 1

IP 47.1.1.1
1 47.1
Intf Dest Intf Label 3 3
In Out Out
3 47.1 1 0.50 2
1
1
2
47.3 3 47.2
2
IP 47.1.1.1

17
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 EXPLICITLY ROUTED OR ER-LSP
Route=
{A,B,C}
#14 #972
#216
B

#14
C
A #972

#462

- ER-LSP follows route that source chooses. In

other words, the control message to establish
the LSP (label request) is source routed.

18
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 EXPLICITLY ROUTED LSP ER-LSP

Intf Label Dest Intf Label Intf Label Dest Intf

In In Out Out In In Out
3 0.50 47.1 1 0.40 3 0.40 47.1 1
Intf Dest Intf Label
In Out Out IP 47.1.1.1
1 47.1
3 47.1.1 2 1.33 3 3
3 47.1 1 0.50
2
1
1
2
47.3 3 47.2
2
IP 47.1.1.1

19
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 ER LSP - advantages

•Operator has routing flexibility (policy-based,

QoS-based)
•Can use routes other than shortest path
•Can compute routes based on constraints in
exactly the same manner as ATM based on
distributed topology database.
(traffic engineering)

20
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 ER LSP - discord!

•Two signaling options proposed in the standards:

CR-LDP, RSVP extensions:
— CR-LDP = LDP + Explicit Route
— RSVP ext = Traditional RSVP + Explicit Route +
Scalability Extensions
•Not going to be resolved any time soon, market
will probably have to resolve it.
•Survival of the fittest not such a bad thing.

21
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Tutorial Outline

• Overview

• Label Encapsulations
• Label Distribution Protocols
• MPLS & ATM
• Constraint Based Routing with CR-LDP
• Summary

22
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 Label Encapsulation

L2 ATM FR Ethernet PPP

Label VPI VCI DLCI “Shim Label”

“Shim Label” …….

IP | PAYLOAD

MPLS Encapsulation is specified over various media

types. Top labels may use existing format, lower
label(s) use a new “shim” label format.
23
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 MPLS Link Layers
• MPLS is intended to run over multiple link layers

• Specifications for the following link layers currently exist:

• ATM: label contained in VCI/VPI field of ATM header

• Frame Relay: label contained in DLCI field in FR header

• PPP/LAN: uses ‘shim’ header inserted between L2 and L3 headers

Translation between link layers types must be supported

MPLS
MPLSintended
intendedto
tobe
be“multi-protocol”
“multi-protocol”below
belowas
aswell
wellas
asabove
above
24
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 MPLS Encapsulation - ATM

ATM
ATMLSR
LSRconstrained
constrainedby
bythe
thecell
cellformat
formatimposed
imposedby
byexisting
existingATM
ATMstandards
standards
5 Octets
ATM Header
Format VPI VCI PT CLP HEC

Option 1 Label Label

Option 2 Combined Label
Option 3 ATM VPI (Tunnel) Label

AAL 5 PDU Frame (nx48 bytes)

n ••• 1
Generic Label Encap. Network Layer Header AAL5 Trailer
ATM and Packet (eg. IP)
(PPP/LAN format)
SAR
48 Bytes

48 Bytes
ATM Header
ATM Payload •••

• Top 1 or 2 labels are contained in the VPI/VCI fields of ATM header

- one in each or single label in combined field, negotiated by LDP
• Further fields in stack are encoded with ‘shim’ header in PPP/LAN format
- must be at least one, with bottom label distinguished with ‘explicit NULL’
• TTL is carried in top label in stack, as a proxy for ATM header (that lacks TTL)
25
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 MPLS Encapsulation - Frame Relay

Q.922 Generic Encap.

Header (PPP/LAN Format) Layer 3 Header and Packet
n ••• 1

C/ E FE BE D E DLCI Size = 10, 17, 23 Bits

DLCI DLCI
R A CN CN E A

• Current label value carried in DLCI field of Frame Relay header

• Can use either 2 or 4 octet Q.922 Address (10, 17, 23 bytes)

• Generic encapsulation contains n labels for stack of depth n

- top label contains TTL (which FR header lacks), ‘explicit NULL’ label value

26
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
MPLS Encapsulation - PPP & LAN Data Links
MPLS ‘Shim’ Headers (1-n)
n ••• 1
Layer 2 Header Network Layer Header
(eg. PPP, 802.3) and Packet (eg. IP)

4 Octets
Label Stack
Label Exp. S TTL
Entry Format
Label: Label Value, 20 bits (0-16 reserved)
Exp.: Experimental, 3 bits (was Class of Service)
S: Bottom of Stack, 1 bit (1 = last entry in label stack)
TTL: Time to Live, 8 bits

• Network layer must be inferable from value of bottom label of the stack
• TTL must be set to the value of the IP TTL field when packet is first labelled
• When last label is popped off stack, MPLS TTL to be copied to IP TTL field
• Pushing multiple labels may cause length of frame to exceed layer-2 MTU
- LSR must support “Max. IP Datagram Size for Labelling” parameter
- any unlabelled datagram greater in size than this parameter is to be fragmented
MPLS
MPLSon
onPPP
PPPlinks
linksand
andLANs
LANsuses
uses‘Shim’
‘Shim’Header
HeaderInserted
Inserted
Between Layer 2 and Layer 3 Headers
Between Layer 2 and Layer 3 Headers
27
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Tutorial Outline

• Overview
• Label Encapsulations
• Label Distribution Protocols
• MPLS & ATM
• IETF Status
• Nortel’s Activity
• Summary

28
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Label Distribution Protocols

• Overview of Hop-by-hop &

Explicit
• Label Distribution Protocol (LDP)
• Constraint-based Routing LDP (CR-LDP)
• Extensions to RSVP
• Extensions to BGP

29
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Comparison - Hop-by-Hop vs. Explicit Routing
Hop-by-Hop Routing Explicit Routing

• Distributes routing of control traffic • Source routing of control traffic

• Builds a set of trees either fragment • Builds a path from source to dest
by fragment like a random fill, or
backwards, or forwards in organized • Requires manual provisioning, or
manner. automated creation mechanisms.

• Reroute on failure impacted by • LSPs can be ranked so some reroute

convergence time of routing protocol very quickly and/or backup paths may
be pre-provisioned for rapid restoration
• Existing routing protocols are
destination prefix based • Operator has routing flexibility (policy-
based, QoS-based,
• Difficult to perform traffic
engineering, QoS-based routing • Adapts well to traffic engineering

Explicit routing shows great promise for traffic engineering

30
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Explicit Routing - MPLS vs. Traditional Routing

• Connectionless nature of IP implies that routing is based on information in

each packet header
• Source routing is possible, but path must be contained in each IP header
• Lengthy paths increase size of IP header, make it variable size, increase
overhead
• Some gigabit routers require ‘slow path’ option-based routing of IP packets
• Source routing has not been widely adopted in IP and is seen as impractical
• Some network operators may filter source routed packets for security
reasons
• MPLS’s enables the use of source routing by its connection-oriented
capabilities
- paths can be explicitly set up through the network
- the ‘label’ can now represent the explicitly routed path
• Loose and strict source routing can be supported
MPLS makes the use of source routing in the Internet practical
31
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Label Distribution Protocols

• Overview of Hop-by-hop & Explicit

• Label Distribution Protocol

(LDP)
• Constraint-based Routing LDP (CR-LDP)
• Extensions to RSVP
• Extensions to BGP

32
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Label Distribution Protocol (LDP) - Purpose

Label distribution ensures that adjacent routers have

a common view of FEC <-> label bindings
Routing Table:
Routing
Routing Table:
Table:
Addr-prefix Next Hop
Addr-prefix
Addr-prefix Next
Next Hop
Hop 47.0.0.0/8 LSR3
47.0.0.0/8
47.0.0.0/8 LSR2
LSR2

LSR1 LSR2 LSR3

IP Packet 47.80.55.3

Label Information Base:

For 47.0.0.0/8 Label
Label Information
Information Base:
Base:
Label-In FEC Label-Out use label ‘17’
XX 47.0.0.0/8 17 Label-In
Label-In FEC Label-Out
Label-Out
17
17 47.0.0.0/8
47.0.0.0/8 XX
XX

Step 3: LSR inserts label Step 2: LSR communicates Step 1: LSR creates binding
value into forwarding base binding to adjacent LSR between FEC and label value

Common understanding of which FEC the label is referring to!

Label distribution can either piggyback on top of an existing routing protocol,

or a dedicated label distribution protocol (LDP) can be created
33
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 Label Distribution - Methods
Label Distribution can take place using one of two possible methods

Downstream Label Distribution Downstream-on-Demand Label Distribution

LSR1 LSR2 LSR1 LSR2

Label-FEC Binding Request for Binding

• LSR2 and LSR1 are said to have an “LDP
adjacency” (LSR2 being the downstream LSR) Label-FEC Binding

• LSR2 discovers a ‘next hop’ for a particular FEC • LSR1 recognizes LSR2 as its next-hop for an FEC

• LSR2 generates a label for the FEC and • A request is made to LSR2 for a binding between
communicates the binding to LSR1 the FEC and a label

• LSR1 inserts the binding into its forwarding tables • If LSR2 recognizes the FEC and has a next hop for
it, it creates a binding and replies to LSR1
• If LSR2 is the next hop for the FEC, LSR1 can use
that label knowing that its meaning is understood • Both LSRs then have a common understanding

Both methods are supported, even in the same network at the same time
For any single adjacency, LDP negotiation must agree on a common
34 method
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
DOWNSTREAM MODE MAKING
SPF TREE COPY IN H/W

#14 #311
#216 #99 #311

D #963 #311

#963
D
#14 D
D
#612 D
D #462

D #311
#5 D
#99

35
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
DOWNSTREAM ON DEMAND
MAKING SPF TREE COPY IN H/W

#14 #311
#216 #99 #311

D #963 #311

D?

#963 D? D?
D? D?
#14 D D D? D
#612 D
D?
D #462

D #311
#5 D
#99
D?

36
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Distribution Control: Ordered v. Independent
Next Hop
MPLS path forms as associations (for FEC)
are made between FEC next-hops
Incoming Outgoing
and incoming and outgoing labels Label Label

Independent LSP Control Ordered LSP Control

• Each LSR makes independent decision on when to • Label-FEC binding is communicated to peers if:
Definition
generate labels and communicate them to upstream - LSR is the ‘egress’ LSR to particular FEC
peers - label binding has been received from
• Communicate label-FEC binding to peers once upstream LSR
next-hop has been recognized
• LSP formation ‘flows’ from egress to ingress
• LSP is formed as incoming and outgoing labels are
spliced together

Comparison • Labels can be exchanged with less delay • Requires more delay before packets can be
• Does not depend on availability of egress node forwarded along the LSP
• Granularity may not be consistent across the nodes • Depends on availability of egress node
at the start • Mechanism for consistent granularity and freedom
• May require separate loop detection/mitigation from loops
method • Used for explicit routing and multicast

Both methods are supported in the standard and can be fully interoperable

37
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
INDEPENDENT MODE

#14 #311
#216 #99 #311

D #963 #311

#963
D
#14 D D
#612 D
D #462
D
#99 #311
#5 D

38
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 Label Retention Methods
Binding LSR2
An LSR may receive label for LSR5
bindings from multiple LSRs LSR1
LSR5

Some bindings may come

Binding for LSR5 LSR3
from LSRs that are not the
valid next-hop for that FEC
Binding
for LSR5 LSR4

Liberal Label Retention Conservative Label Retention

LSR2 LSR2
Label Bindings Label Bindings
for LSR5 LSR1 for LSR5 LSR1
LSR3 LSR3
LSR4’s Label LSR4’s Label
LSR3’s Label LSR3’s Label
LSR2’s Label LSR2’s Label
LSR4 LSR4
Valid Valid
Next Hop Next Hop
• LSR maintains bindings received from LSRs • LSR only maintains bindings received from
other than the valid next hop valid next hop
• If the next-hop changes, it may begin using • If the next-hop changes, binding must be
these bindings immediately requested from new next hop
• May allow more rapid adaptation to routing • Restricts adaptation to changes in routing
changes
• Fewer labels must be maintained by LSR
• Requires an LSR to maintain many more
labels

Label Retention method trades off between label capacity and speed of adaptation
39 to routing changes
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
LIBERAL RETENTION MODE
These labels are kept
incase they are needed
after a failure.
#216
D
D #422

#622 D
#963
D
#14 D D
#612 D D #462
D #311
#5 D #99

40
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
CONSERVATIVE RETENTION MODE
These labels are
released the moment
they are received.
#216
D
D #422

#622 D
#963
D
#14 D D
#612 D D #462
D #311
#5 D #99

41
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 LDP - STATUS

•Gone to last call

•Multi Vendor interoperability
demonstrated for DSOD on OC-3/ATM by
(Nortel Networks & Cisco) at Interop/99
•Source code for these PDUs publicly
available: www.NortelNetworks.com/mpls

42
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Label Distribution Protocols

• Overview of Hop-by-hop & Explicit

• Label Distribution Protocol (LDP)

• Constraint-based Routing LDP

(CR-LDP)
• Extensions to RSVP

43
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Constraint-based LSP Setup using LDP

• Uses LDP Messages (request, map, notify)

• Shares TCP/IP connection with LDP
• Can coexist with vanilla LDP and inter-
work with it, or can exist as an entity on its
own
• Introduces additional data to the vanilla
LDP messages to signal ER, and other
“Constraints”

44
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 ER-LSP Setup using CR-LDP

2. Request message processed 3. Request message

1. Label Request message. It and next node determined. terminates.
contains ER path < B,C,D> Path list modified to <C,D>

6. When LER A 5. LSR C receives label to

receives label mapping, use for sending data to LER 4. Label mapping
the ER established. D. Label table updated message originates.

LER A LSR B LSR C LER D

Ingress ER Label Egress

Switched Path

45
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
LDP/CR-LDP INTERWORKING
INSERT ER{A,B,C}
#216 #99 A
#311

B
#14 C
#612 #462

#5

LDP CR-LDP

- It is possible to take a vanilla LDP label request

let it flow vanilla to the edge of the core, insert
an ER hop list at the core boundary at which
point it is CR-LDP to the far side of the core.
46
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Basic LDP Message additions

• LSPID: A unique tunnel identifier within an

MPLS network.
• ER: An explicit route, normally a list of IPV4
addresses to follow (source route) the label
request message.
• Resource Class (Color): to constrain the
route to only links of this Color. Basically a
32 bit mask used for constraint based
computations.
• Traffic Parameters: similar to ATM call setup,
which specify treatment and reserve
resources.
47
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 CR-LDP Traffic Parameters
Flags control “negotiability” of
parameters
U F Traf. Param. TLV Length Frequency constrains the variable
delay that may be introduced
Flags Frequency Reserved Weight
Weight of the CRLSP in the
Peak Data Rate (PDR)
“relative share”
Peak Burst Size (PBS)
Peak rate (PDR+PBS) maximum
Committed Data Rate (CDR) rate at which traffic should be sent
to the CRLSP
Committed Burst Size (CBS)
Committed rate (CDR+CBS) the
Excess Burst Size (EBS)
rate that the MPLS domain
commits to be available to the
CRLSP
32 bit fields are short IEEE floating point
numbers Excess Burst Size (EBS) to
measure the extent by which the
Any parameter may be used or not used by
traffic sent on a CRLSP exceeds
selecting appropriate values
the committed rate

48
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
CRLSP characteristics not edge functions

• The approach is like diff-serv’s separation of PHB

from Edge
• The parameters describe the “path behavior” of the
CRLSP, i.e. the CRLSP’s characteristics
• Dropping behavior is not signaled
— Dropping may be controlled by DS packet markings

• CRLSP characteristics may be combined with edge

functions (which are undefined in CRLDP) to create
services
— Edge functions can perform packet marking
— Example services are in an appendix

49
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Peak rate

• The maximum rate at which traffic should

be sent to the CRLSP
• Defined by a token bucket with parameters
— Peak data rate (PDR)
— Peak burst size (PBS)

• Useful for resource allocation

• If a network uses the peak rate for resource
allocation then its edge function should
regulate the peak rate
• May be unused by setting PDR or PBS or
both to positive infinity
50
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Committed rate

• The rate that the MPLS domain commits to

be available to the CRLSP
• Defined by a token bucket with parameters
— Committed data rate (CDR)
— Committed burst size (CBS)

• Committed rate is the bandwidth that

should be reserved for the CRLSP
• CDR = 0 makes sense; CDR = + less so
• CBS describes the burstiness with which
traffic may be sent to the CRLSP
51
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Excess burst size

• Measure the extent by which the traffic sent

on a CRLSP exceeds the committed rate
• Defined as an additional limit on the
committed rate’s token bucket
• Can be useful for resource reservation
• If a network uses the excess burst size for
resource allocation then its edge function
should regulate the parameter and perhaps
mark or drop packets
• EBS = 0 and EBS = + both make sense

52
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Frequency

• Specifies how frequently the committed rate should

be given to CRLSP
• Defined in terms of “granularity” of allocation of
rate
• Constrains the variable delay that the network may
introduce
• Constrains the amount of buffering that a LSR may
use
• Values:
— Very frequently: no more than one packet may be
buffered
— Frequently: only a few packets may be buffered
— Unspecified: any amount of buffering is acceptable
53
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Weight

• Specifies the CRLSP’s weight in the

“realtive share algorithm”
• Implied but not stated:
— CRLSPs with a larger weight get a bigger relative share
of the “excess bandwidth”

• Values:
— 0 — the weight is not specified
— 1-255 — weights; larger numbers are larger weights

• The definition of “relative share” is

network specific

54
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 Negotiation flags

If a parameter is flagged as negotiable

then LSRs may replace the parameter
value with a smaller value in the label
Res F6 F5 F4 F3 F2 F1 request message. LSRs descover the
negotiated values in the label mapping
message.
Weight Negotiation Flag

CDR Negotiation Flag

PDR Negotiation Flag

CBS Negotiation Flag
EBS Negotiation Flag

PBS Negotiation Flag

Label request - possible

downward negotiation

Label mapping -
no negotiation

55
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 CR-LDP PREEMPTION

A CR-LSP carries an LSP priority. This

priority can be used to allow new LSPs to
bump existing LSPs of lower priority in
order to steal their resources.
This is especially useful during times of
failure and allows you to rank the LSPs
such that the most important obtain
resources before less important LSPs.
These are called the setupPriority and a
holdingPriority and 8 levels are provided.
56
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 CR-LDP PREEMPTION

When an LSP is established its

setupPriority is compared with the
holdingPriority of existing LSPs, any with
lower holdingPriority may be bumped to
obtain their resources.
This process may continue in a domino
fashion until the lowest holdingPriority
LSPs either clear or are on the worst
routes.

57
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 PREEMPTION A.K.A. BUMPING

Route=
{A,B,C}
#216
B

#14
C
A #972

#462

58
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 TOPOLOGY DB FOR BUMPING
LOW PRI

HIGH PRI Topology Database sees 8 levels of bandwidth, depending on

the setup priority of the LSP, a subset of that bandwidth is
seen as available.
The highest priority sees all bandwidth used and free at
levels lower that it, etc. to the lowest priority which only sees
unused bandwidth.
59
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
CR-LDP Status

• Going through last call

• Demonstrated Interoperability Nov/98
Nortel Networks, Ericson, GDC
• Extensions to CR-LDP now being
proposed for:
• Bandwidth Adjustment (AT&T)
Multicast ….

• Source code for these PDUs publicly

available:
www.NortelNetworks.com/mpls
60
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Label Distribution Protocols

• Overview of Hop-by-hop & Explicit

• Label Distribution Protocol (LDP)
• Constraint-based Routing LDP (CR-LDP)

• Extensions to RSVP

61
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 ER-LSP setup using RSVP

3. Resv message originates.

2. New path state. Path Contain the label to use and the
1. Path message. It contains message sent to next node required traffic/QoS para.
ER path < B,C,D>
4. New reservation state. Per-hop Path and
5. When LER A Resv message propagated
receives Resv, the ER Resv refresh unless
upstream suppressed
established.

LER A LSR B LSR C LER D

Per-hop Path and

Per-hop Path and Resv refresh unless
Resv refresh unless suppressed
suppressed

62
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Tutorial Outline

• Overview
• Label Encapsulations
• Label Distribution Protocols

• MPLS & ATM

• Constraint Based Routing with CR-LDP
• Summary

63
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
MPLS & ATM

• Various Modes of Operation

— Label-Controlled ATM
— Tunneling Through ATM
— Ships in the night with ATM

• ATM Merge
— VC Merge
— VP Merge

64
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
MPLS & ATM

Several Models for running MPLS on ATM:

1. Label-Controlled ATM:
• Use ATM hardware for label switching
• Replace ATM Forum SW by IP/MPLS

IP Routing
MPLS

ATM HW

65
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 Label-Controlled ATM
• Label switching is used to forward network-layer packets
• It combines the fast, simple forwarding technique of ATM with network layer
routing and control of the TCP/IP protocol suite

Network Layer
Label Switching Router
Routing
(eg. OSPF, BGP4)
Switched
Switchedpathpathtopology
topology
formed using network
formed using network Forwarding Forwarding
layer
layerrouting
routing Table Table
(I.e.
(I.e. TCP/IPtechnique)
TCP/IP technique) B 17 C 05
•
•
• Label
Port
05
A C
IP Packet

Label
Packets
Packetsforwarded
forwarded
IP Packet 17 B D by
by swappingshort,
swapping short,
fixed length labels
fixed length labels
(I.e.
(I.e.ATM
ATMtechnique)
technique)

ATM Label Switching is the combination of L3 routing and L2 ATM switching

66
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 2. MPLS Over ATM

MPLS MPLS
ATM Network L
L
S S
R R

Two Models

VP VC

Internet Draft:
VCID notification over ATM Link

67
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
3. Ships in the Night

L MPLS L
S S
R ATM R
ATM ATM
SW SW

• ATM Forum and MPLS control planes both run on the same hardware
but are isolated from each other, i.e. they do not interact.
• This allows a single device to simultaneously operate as both an MPLS
LSR and an ATM switch.
• Important for migrating MPLS into an ATM network

68
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Ships in the night Requirements

• Resource Management
—VPI.VCI Space Partitioning
—Traffic management
– Bandwidth Reservation
– Admission Control
– Queuing & Scheduling
– Shaping/Policing
—Processing Capacity

69
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 Bandwidth Management

A. Full Sharing B. Protocol Partition C. Service Partition

MPLS Pool 1 MPLS MPLS
•50% Pool 1
Pool 1
•ATM •50%
•MPLS
•rt-VBR ATM
•ATM
•COS2
Available
Port Capacity

ATM Available

Pool 2 ATM Pool 2 MPLS

•50% •50%
Available •rt-VBR •nrt-VBR ATM
•COS1
Available
Available

• Bandwidth Guarantees
• Flexibility 70
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 ATM Merge

• Multipoint-to-point capability
• Motivation
— Stream Merge to achieve scalability in MPLS:
– O(n) VCs with Merge as opposed to O(n2) for full mesh
– less labels required
— Reduce number of receive VCs on terminals

• Alternatives
— Frame-based VC Merge
— Cell-based VP Merge

71
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 Stream Merge

Input cell streams in out

1 1 1 1 7
2 2 2 2 6 6 7 9 6 7 9 6 7
3 3 3 9
Non-VC merging (Nin--Nout)
Input cell streams in out
7 7 7 7 7 7 7 7
1 1 1 1 7 AAL5 Cell Interleaving Problem
2 2 2 2 7
7 7 7 7 7 7 7 7
3 3 3 7
No Cell Interleaving
VC merging (Nin-1out)
72
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 VC-Merge: Output Module

Reassembly buffers

Output buffer
Merge

73
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 VP-Merge

VCI=1 Option 1: Dynamic VCI Mapping

VCI=2

VPI=1 No Cell Interleaving Problem

Since VCI is unique

VCI=1
VCI=2
VPI=2 VCI=3
VPI=3
Option 2: Root
Assigned VCI

VCI=3 –merge multiple VPs into one VP

–use separate VCIs within VPs to distinguish frames
–less efficient use of VPI/VCI space, needs support of SVP

74
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Tutorial Outline

• Overview
• Label Encapsulations
• Label Distribution Protocols
• MPLS & ATM

• Constraint Based Routing

with CR-LDP
• Summary

75
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 IP FOLLOWS A TREE TO DESTINATION

Dest=a.b.c.d

Dest=a.b.c.d

Dest=a.b.c.d

- IP will over-utilize best paths and under-utilize

less good paths.
76
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
HOP-BY-HOP(A.K.A Vanilla) LDP

#216

#963
#14
#612 #462

#99 #311
#5

- Ultra fast, simple forwarding a.k.a switching

- Follows same route as normal IP datapath
- So like IP, LDP will over-utilize best paths and
under-utilize less good paths.
77
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Label Switched Path (Two Types)

#427
#216

#819

#18 #77

#963
#14
#612 #462

#99 #311
#5

Two types of Label Switched Paths:

• Hop by hop (“Vanilla” LDP)
• Explicit Routing (LDP+”ER”)
78
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
CR-LDP
• CR = “Constraint” based “Routing”

• eg: USE: (links with sufficient resources AND

(links of type “someColor”) AND
(links that have delay less than 200 ms)

& &

=
79
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 Pieces Required for Constraint
Based Routing
1) A topology database that knows about link attributes.
{a,b,c}
ANSWER: OSPF/ISIS + attribs{a,b,c}
z

{a,b,c}
z

2) A label distribution protocol that goes where it’s told.

ANSWER: LDP + Explicit Route{x,y,m,z}

x y m z
80
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Tutorial Outline

• Overview
• Label Encapsulations
• Label Distribution Protocols
• MPLS & ATM
• Constraint Based Routing with CR-LDP
• Summary

81
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 Summary of Motivations for MPLS
• Simplified forwarding based on exact match of fixed length label
- initial drive for MPLS was based on existance of cheap, fast ATM switches
• Separation of routing and forwarding in IP networks
- facilitates evolution of routing techniques by fixing the forwarding method
- new routing functionality can be deployed without changing the forwarding
techniques of every router in the Internet
• Facilitates the integration of ATM and IP
- allows carriers to leverage their large investment of ATM equipment
- eliminates the adjacency problem of VC-mesh over ATM
•Enables the use of explicit routing/source routing in IP networks
- can be easily used for such things as traffic management, QoS routing
•Promotes the partitioning of functionality within the network
- move granular processing of packets to edge; restrict core to packet forwarding
- assists in maintaining scalability of IP protocols in large networks
•Improved routing scalability through stacking of labels
- removes the need for full routing tables from interior routers in transit domain;
only routes to border routers are required
•Applicability to both cell and packet link-layers
- can be deployed on both cell (eg. ATM) and packet (eg. FR, Ethernet) media
- common management and techniques simplifies engineering
Many drivers exist for MPLS above and beyond high speed forwarding
82
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 IP and ATM Integration
IP
IPover
overATM
ATMVCs IP
VCs IPover
overMPLS
MPLS

• ATM cloud invisible to Layer 3 Routing • ATM network visible to Layer 3 Routing

• Full mesh of VCs within ATM cloud • Singe adjacency possible with edge router

• Many adjacencies between edge routers • Hierachical network design possible

• Topology change generates many route updates • Reduces route update traffic and power
needed to process them
• Routing algorithm made more complex

MPLS
MPLSeliminates
eliminatesthe
the“n-squared”
“n-squared”problem
problemof
ofIP
IPover
overATM
ATMVCs
VCs
83
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 Traffic Engineering
B C
Demand
A D

Traffic engineering is the process of mapping traffic demand onto a network

Network
Topology

Purpose of traffic engineering:

• Maximize utilization of links and nodes throughout the network
• Engineer links to achieve required delay, grade-of-service
• Spread the network traffic across network links, minimize impact of single failure
• Ensure available spare link capacity for re-routing traffic on failure
• Meet policy requirements imposed by the network operator
Traffic engineering key to optimizing cost/performance 84
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 Traffic Engineering Alternatives
Current methods of traffic engineering:

Manipulating routing metrics Difficult to manage

Use PVCs over an ATM backbone Not scalable
Over-provision bandwidth Not economical

MPLS provides a new method to do traffic engineering (traffic steering)

Example Network:

Ingress node
explicitly routes Chosen by Traffic Eng.
traffic over (least congestion)
uncongested path
Chosen by routing protocol
Congested Node
(least cost)

Potential benefits of MPLS for traffic engineering:

- allows explicitly routed paths operator control
- no “n-squared” problem scalable
- per FEC traffic monitoring granularity of feedback
- backup paths may be configured redundancy/restoration

MPLS combines benefits of ATM and IP-layer traffic engineering

85
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
 MPLS Traffic Engineering Methods

• MPLS can use the source routing capability to steer traffic on desired path

• Operator may manually configure these in each LSR along the desired path
- analogous to setting up PVCs in ATM switches

• Ingress LSR may be configured with the path, RSVP used to set up LSP
- some vendors have extended RSVP for MPLS path set-up

• Ingress LSR may be configured with the path, LDP used to set up LSP
- many vendors believe RSVP not suited

• Ingress LSR may be configured with one or more LSRs along the desired path,
hop-by-hop routing may be used to set up the rest of the path
- a.k.a loose source routing, less configuration required

• If desired for control, route discovered by hop-by-hop routing can be frozen

- a.k.a “route pinning”

• In the future, constraint-based routing will offload traffic engineering tasks from
the operator to the network itself
86
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
MPLS: Scalability Through Routing Hierarchy
BR2 AS1
AS2 AS3
TR1 TR2
BR1
BR3

TR4 TR3
Egress border
Ingress router router pops
Packet labelled Forwarding in the interior
receives packet label and fwds.
based on BR4 based on IGP route
egress router

• Border routers BR1-4 run an EGP, providing inter-domain routing

• Interior transit routers TR1-4 run an IGP, providing intra-domain routing
• Normal layer 3 forwarding requires interior routers to carry full routing tables
- transit router must be able to identify the correct destination ASBR (BR1-4)
• Carrying full routing tables in all routers limits scalability of interior routing
- slower convergence, larger routing tables, poorer fault isolation
• MPLS enables ingress node to identify egress router, label packet based on interior route
• Interior LSRs would only require enough information to forward packet to egress

MPLS increases scalability by partitioning exterior routing from interior routing

87
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
MPLS: Partitioning Routing and Forwarding
Routing Based on:
Classful Addr. Prefix?
OSPF, IS-IS, BGP, RIP Classless Addr. Prefix?
Multicast Addr.?
Forwarding Table Port No.?
ToS Field?

Forwarding
Based on:
MPLS Exact Match on Fixed Length Label

• Current network has multiple forwarding paradigms

- class-ful longest prefix match (Class A,B,C boundaries)
- classless longest prefix match (variable boundaries)
- multicast (exact match on source and destination)
- type-of-service (longest prefix. match on addr. + exact match on ToS)
• As new routing methods change, new route look-up algorithms are required
- introduction of CIDR
• Next generation routers will be based on hardware for route look-up
- changes will require new hardware with new algorithm
• MPLS has a consistent algorithm for all types of forwarding; partitions routing/fwding
- minimizes impact of the introduction of new forwarding methods
MPLS introduces flexibility through consistent forwarding paradigm
88
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Upper Layer Consistency Across Link Layers

PPP ATM Frame

Ethernet (SONET, DS-3 etc.) Relay

• MPLS is “multiprotocol” below (link layer) as well as above (network layer)

• Provides for consistent operations, engineering across multiple technologies

• Allows operators to leverage existing infrastructure

• Co-existence with other protocols is provided for

- eg. “Ships in the Night” operation with ATM, muxing over PPP

MPLS
MPLSpositioned
positionedas
asend-to-end
end-to-endforwarding
forwardingparadigm
paradigm
89
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS
Summary

• MPLS is an exciting promising emerging

technology
• Basic functionality (Encapsulation and
basic Label Distribution) has been defined
by the IETF
• Traffic engineering based on MPLS/IP is
just round the corner.
• Convergence is one step closer …...

90
Copyright © 1999, Nortel Networks, Ltd. BNJ+PAS