Scribd
Upload
206 views21 pages

Pressure Vessel Design Seminar

The document outlines the schedule and content for seminars on designing and analyzing pressure vessels according to ASME VIII-1. The seminars will cover topics like calculating vessel components, applying external loads, selecting materials, and determining required thicknesses, stresses, and welds. The schedule also mentions analyzing heat exchangers, air coolers, and reviewing relevant ASME code references for pressure vessel design. Input data needed and material properties, correlations, and standards will be addressed.

Uploaded by

Huy Le
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
206 views21 pages

Pressure Vessel Design Seminar

The document outlines the schedule and content for seminars on designing and analyzing pressure vessels according to ASME VIII-1. The seminars will cover topics like calculating vessel components, applying external loads, selecting materials, and determining required thicknesses, stresses, and welds. The schedule also mentions analyzing heat exchangers, air coolers, and reviewing relevant ASME code references for pressure vessel design. Input data needed and material properties, correlations, and standards will be addressed.

Uploaded by

Huy Le
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 21

PRESSURE VESSEL

ASME VIII-1
SCHEDULE

• First Seminar
• Basic about ASME VIII-1 and ASME II part A, D
• Calculation
• Head, shell, nozzle
• Reinforcement
• Fillet weld
• Supports, legs
• Lifting lugs
• Application in PVElite
• Rectangular tank under hydrostatic column
SCHEDULE CONT.

• Second Seminar (Out of ASME)


• Platform
• Weight
• Force moment
• Wind load analysis ACSE
• Seismic analysis ACSE
• Application in PVElite
• Third Seminar
• Shell - tube heat exchanger
• Inlet and outlet header of air-cooler
• Application in PVElite
INPUT DATA

• Fluid (service)
• Material (ASME II)
• Sketch of vessel
• Design Pressure (internal & external)
• Design temperature
• Corrosion allowance
• NDT
MATERIAL

• ASME II part A
• Plate: SA-20, SA-516,…
• Flange: SA-961, SA-105,…
• Pipe: SA-530, SA-106…
• Bolt: SA-193
• Nut: SA-962, SA-194,…
• ASME II Part D (metric)
• Table 1A: Maximum allowable stress values for ferrous
materials
• Table 3: Maximum allowable stress values for bolting
materials
MATERIAL COND’.

• Table TE-1: Thermal expansion for ferrous materials


• Table TCD: Nominal coefficients of thermal conductivity
(TC) and thermal diffusivity (TD)
• Table TM-1: Moduli of elasticity of ferrous materials for
given temperatures
• Table TE-1: Thermal expansion for ferrous materials
• Sub-part 3: Charts and tables for determining shell
thickness of components under external pressure
HEAD THICKNESS

• Head thickness
• Semi-elliptical UG-32

• Flat head UG-34(C)(2)

• Ref. UG-32, UG-33, UG-34, UG-46 & App. 1-4


• Semi- spherical, tori-sphere, cone is rarely used
SHELL THICKNESS

• Shell thickness
• Cylindrical shell UG-27

• Conical shell
• Ref. UG-27, UG-32, App. 1-4
HYDROSTATIC TEST

• UG-99(b)
Hydrostatic test = 1.3 x MAWP x St/Sd

• TCVN 8366 – 2010


Hydrostatic test = 1.5 design pressure
ELONGATION

• Head

• Shell

If elongation is not satisfied with UCS-56 & UCS- 79


then the plate shall be heat treatment
• Ref. UCS-79, UCS-56
IMPACT TEST

• Ref. UCS-66
NOZZLE THICKNESS

• Thickness is calculated as UG-27

• Except manhole, thickness of nozzles comply with


UG-45
• Ref. UG-27 and UG-45
REINFORCEMENT

• Nozzle reinforcement calculation comply with UG-


38 to UG-42 and UG-46
REINFORCEMENT CONT.
REINFORCEMENT CONT.
WELD CATEGORIES

• UW-3
WELD JOINT EFFICIENT

• UW-11 and Table UW-12


WELD DETAIL

• UW-16
WELD DETAIL CONT.

• UW-16
SUPPORT

• Pressure Vessel Handbook (page 86-121)


• Horizontal support
• Leg support
• Standard lifting lugs
CODE REFERENCE

• ASME VIII-1
• ASME II PART A
• ASME II PART D
• ASME B31.3
• ASME B31.4
• ASME B31.8
• ASME B16.5
• ASME B16.20
• ASME B11.9
• ASME IX
• Pressure Vessel Handbook etc…

You might also like