Chapter 4: Network Access

Instructor Materials

CCNA Routing and Switching

Introduction to Networks v6.0
Chapter 4: Network Access
Introduction to Networks 6.0
Planning Guide

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 3
4.1 Physical Layer Protocols

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 4
Physical Layer Connection
Types of Connections
 Before network
communications can
occur, a physical
connection to a local
network must be
established.
 A physical connection
can be a wired
connection using a
cable or a wireless
connection using
radio waves.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 5
Physical Layer Connection
Network Interface Cards

 Network Interface Cards (NICs) connect a device to

a network.
 Used for a wired connection.

 Wireless Local Area Network

(WLAN) NICs are used for
wireless connections.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 6
Purpose of the Physical Layer
The Physical Layer
• Provides the means to
transport the bits that
make up a data link
layer frame across the
network media.
• Accepts a complete
frame from the data
link layer and encodes
it as a series of signals
that are transmitted
onto the local media.
• Encoded bits that
comprise a frame are
received by either an
end device or an
intermediate device.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 7
Purpose of the Physical Layer
Physical Layer Media

Three basic
forms of
network media

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 8
Physical Layer Characteristics
Functions
 Encoding
The transition occurs at the
• Method of converting a stream of
middle of each bit period.
data bits into a predefined
"code”.
 Signaling Method
• Method of representing the bits.
• Physical layer standards must
define what type of signal
represents a "1" and what type
of signal represents a "0”.
• Long pulse might represent a 1
whereas a short pulse
represents a 0.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 9
Physical Layer Characteristics
Bandwidth
 Capacity of a medium to carry data.

 Digital bandwidth measures the amount of data that can flow from one place to another in a given
amount of time.
 Bandwidth is sometimes thought of as the speed that bits travel, however this is not accurate. In
both 10Mb/s and 100Mb/s Ethernet, the bits are sent at the speed of electricity. The difference is
the number of bits that are transmitted per second.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 10
Physical Layer Characteristics
Throughput
 Measure of the transfer of bits across
the media over a given period of time.
 Usually does not match the specified
bandwidth in physical layer
implementations due to many factors.
• Amount of traffic
• Type of traffic
• Latency created by network devices
encountered between source and
destination
 Goodput is throughput minus traffic
overhead for establishing sessions,
acknowledgments, and encapsulation.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 11
Physical Layer Characteristics
Types of Physical Media
The figure shows different types of interfaces and ports available on a 1941 router.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 12
4.2 Network Media

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 13
Copper Cabling
Characteristics of Copper Media
 Transmitted on copper cables as electrical pulses.

 Attenuation - the longer the signal travels, the

more it deteriorates.
 All copper media must follow strict distance
limitations.
 Electromagnetic interference (EMI) or radio
frequency interference (RFI) - distorts and corrupts
the data signals being carried by copper media.
• To counter copper cables wrapped in shielding.
 Crosstalk - disturbance caused by the electric or
magnetic fields of a signal on one wire to the
signal in an adjacent wire.
• To cancel crosstalk opposing circuit wire pairs
twisted together.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 14
Copper Cabling
Copper Media
There are three main types of copper media used in networking.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 15
Copper Cabling
Unshielded Twisted-Pair Cable
 UTP cabling is the most common networking media.
• Terminated with RJ-45 connectors.
• Used for interconnecting network hosts with networking devices such as switches.
• Consists of four pairs of color-coded wires that have been twisted together to help protect against signal
interference from other wires.
• Color codes aid in cable termination.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 16
Copper Cabling
Shielded Twisted-Pair (STP) Cable

 STP provides better noise protection than

UTP.
 STP cable is significantly more expensive
and difficult to install.
 Uses an RJ-45 connector.

 Combines the techniques of shielding to

counter EMI and RFI, and wire twisting to
counter crosstalk.
 Uses four pairs of wires, each wrapped in a
foil shield, which are then wrapped in an
overall metallic braid or foil.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 17
Copper Cabling
Coaxial Cable
 Coax consists of:
• A copper conductor used to transmit the electronic signals.
 UTP cable has essentially replaced coaxial cable in
modern Ethernet installations but is used in:
• Wireless installations: Coaxial cables attach antennas to
wireless devices.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 18
Copper Cabling
Copper Media Safety
Copper media are susceptible to fire and electrical hazards.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 19
UTP Cabling
Properties of UTP Cabling
 Consists of four pairs of color-coded copper
wires that have been twisted together and
then encased in a flexible plastic sheath.
 Small size can be advantageous during
installation. Notice that the
 UTP cable does not use shielding to counter orange/orange white
the effects of EMI and RFI. pair is twisted less than
the blue/blue white pair.
• Cancellation: When two wires in an electrical
circuit are placed close together, their
Each colored pair is
magnetic fields are the exact opposite of each twisted a different
other and cancel out any outside EMI and RFI number of times.
signals.
• Varies the number of twists per wire pair to
further enhance the cancellation effect of a
paired circuit.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 20
UTP Cabling
UTP Cabling Standards  UTP cabling conforms to the standards established by
TIA/EIA.
• TIA/EIA-568 stipulates the cabling standards for LAN
installations
 Cat 3 Cable
• Used for voice communication
• Most often used for phone lines
 Cat 5 and 5e Cable
• Used for data transmission
• Cat5 supports 100 Mb/s and can support 1000Mb/s, but
it is not recommended
• Cat5e supports 1000 Mb/s
 Cat 6 Cable
• Used for data transmission
• An added separator is between each pair of wires
allowing it to function at higher speeds
• Support 1000 Mb/s – 10 Gb/s, though 10 Gb/s is not
recommended © 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 21
UTP Cabling
UTP Connectors
 UTP cable terminated with an RJ-45
connector.
 RJ-45 connector is the male component,
crimped at the end of the cable.
 Socket is the female component of a
network device, wall, cubicle partition
outlet, or patch panel.
 Essential that all copper media
terminations be of high quality to ensure
optimum performance with current and
future network technologies.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 22
UTP Cabling
Types of UTP Cable

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 23
Fiber Optic Cabling
Properties of Fiber Optic Cabling
 Transmits data over longer distances and at
higher bandwidths.
 Used to interconnect network devices.

 Flexible, but extremely thin, transparent strand of

very pure glass, not much bigger than a human
hair.
 Bits are encoded on the fiber as light pulses.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 24
Fiber Optic Cabling
Types of Fiber Media

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 25
Fiber Optic Cabling
Fiber-Optic Connectors

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 26
Fiber Optic Cabling
Fiber versus Copper

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 27
Wireless Media
Properties of Wireless Media
 Wireless media carry electromagnetic signals that represent
the binary digits of data communications using radio or
microwave frequencies.
 Wireless areas of concern:
• Coverage area: Construction materials used in buildings and
structures, and the local terrain, will limit the coverage.
• Security: Devices and users, not authorized for access to the
network, can gain access to the transmission.
• Shared medium: Only one device can send or receive at a
time and the wireless medium is shared amongst all wireless
users.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 28
Wireless Media
Types of Wireless Media
 Wi-Fi: Standard IEEE 802.11
• Uses Carrier/Sense Multiple Access/Collision Avoidance (CSMA/CA).
• Wireless NIC must wait till channel is clear.
 Bluetooth: Standard IEEE 802.15
• Wireless Personal Area Network (WPAN)
• Uses a device pairing process for distances 1 to 100 meters
 WiMAX: Standard IEEE 802.16
• Worldwide Interoperability for Microwave Access
• Wireless broadband access.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 29
Wireless Media
Wireless LAN

 Wireless LAN requires the following

network devices:
• Wireless Access Point (AP):
Concentrates the wireless signals from
users and connects to the existing copper-
based network infrastructure, such as
Ethernet.
• Wireless NIC adapters: Provide wireless
communication capability to each network
host.
Home and small business wireless
routers integrate the functions of a router,
switch, and access point into one device.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 30
4.3 Data Link Protocols

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 31
Purpose of the Data Link Layer
The Data Link Layer

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 32
Purpose of the Data Link Layer
The Data Link Layer (Cont.)

Layer 2
Data Link
Addresses

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 33
Purpose of the Data Link Layer
Data Link Sublayers  Data link layer is divided into two sublayers:
• Logical Link Control (LLC) 
• Communicates with the network layer.
• Identifies which network layer protocol is being used
for the frame.
• Allows multiple Layer 3 protocols, such as IPv4 and
IPv6, to utilize the same network interface and
media.
• Media Access Control (MAC) 
• Defines the media access processes performed by
the hardware.
• Provides data link layer addressing and access to
various network technologies.
• Communicates with Ethernet to send and receive
frames over copper or fiber-optic cable.
• Communicates with wireless technologies such as
Wi-Fi and Bluetooth.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 34
Purpose of the Data Link Layer
Media Access Control

 As packets travel from the

source host to the destination
host, they travel over different
physical networks.
 Physical networks can consist
of different types of physical
media such as copper wires,
optical fibers, and wireless
consisting of electromagnetic
signals, radio and microwave
frequencies, and satellite links.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 35
Purpose of the Data Link Layer
Providing Access to Media

 At each hop along the path, a router:

• Accepts a frame from a medium
• De-encapsulates the frame
• Re-encapsulates the packet into a new frame
• Forwards the new frame appropriate to the medium
© 2016 Cisco and/or its affiliates. All rights reserved.
of that segment
Cisco Confidential 36
4.4 Media Access Control

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 37
Topologies
Controlling Access to the Media
 Media access control is the equivalent of
traffic rules that regulate the entrance of
motor vehicles onto a roadway.
 The absence of any media access control
would be the equivalent of vehicles
ignoring all other traffic and entering the
road without regard to the other vehicles.
 However, not all roads and entrances are
the same. Traffic can enter the road by
merging, by waiting for its turn at a stop
sign, or by obeying signal lights. A driver
follows a different set of rules for each
type of entrance.
Sharing the Media

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 38
Topologies
Physical and Logical Topologies

 Physical topology - Refers

to the physical connections
and identifies how end
devices and infrastructure
devices such as routers,
switches, and wireless
access points are
interconnected.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 39
Topologies
Physical and Logical Topologies (Cont.)

 Logical Topology: Refers to

the way a network transfers
frames from one node to the
next. These logical signal
paths are defined by data link
layer protocols.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 40
WAN Topologies
Common Physical WAN Topologies

 Point-to-Point - Permanent link between

two endpoints.
 Hub and Spoke - A central site
interconnects branch sites using point-to-
point links.
 Mesh - Provides high availability, but
requires that every end system be
interconnected to every other system.
Administrative and physical costs can be
significant.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 41
WAN Topologies
Physical Point-to-Point Topology

 Frames are placed

on the media by the
node at one end
and taken from the
media by the node
at the other end of
the point-to-point
circuit.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 42
WAN Topologies
Logical Point-to-Point Topology

• End nodes communicating in a point-to-point network can be physically

connected via a number of intermediate devices.
• However, the use of physical devices in the network does not affect the logical
topology.
• The logical connection between nodes forms what is called a virtual circuit.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 43
WAN Topologies
Logical Point-to-Point Topology (Cont.)

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 44
LAN Topologies
 Star - End devices are connected to a
Physical LAN Topologies central intermediate device. Use Ethernet
switches.
 Extended Star - Additional Ethernet
switches interconnect other star topologies.
 Bus - Used in legacy networks. All end
systems are chained to each other and
terminated in some form on each end.
Switches are not required to interconnect
the end devices. Bus topologies using coax
cables were used in legacy Ethernet
networks because it was inexpensive and
easy to set up.
 Ring - End systems are connected to their
respective neighbor forming a ring. Unlike
the bus topology, the ring does not need to
be terminated. Ring topologies were used in
legacy Fiber Distributed Data Interface
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 45
(FDDI) and Token Ring networks.
LAN Topologies
Half and Full Duplex

 Half-Duplex Communication
• Both devices can transmit and
receive on the media but cannot do
so simultaneously.
• Used in legacy bus topologies and
with Ethernet hubs.
• WLANs also operate in half-duplex.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 46
LAN Topologies
Half and Full Duplex (Cont.)

 Full-Duplex Communication
• Both devices can transmit and
receive on the media at the same
time. 
• Data link layer assumes that the
media is available for transmission for
both nodes at any time.
• Ethernet switches operate in full-
duplex mode by default, but can
operate in half-duplex if connecting to
a device such as an Ethernet hub.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 47
LAN Topologies
Media Access Control Methods

 Contention-Based Access
• Nodes operate in half-
duplex.
• Compete for the use of
the medium.
• Only one device can
send at a time.  

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 48
LAN Topologies
Contention-based Access - CSMA/CD
 Carrier Sense Multiple Access/Collision Detection
(CSMA/CD) process is used in half-duplex Ethernet
LANs.
• If two devices transmit at the same time, a collision
will occur.
1 • Both devices will detect the collision on the network.
• Data sent by both devices will be corrupted and will
need to be resent.

2 3

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 49
LAN Topologies
Contention-based Access - CSMA/CA

 CSMA/CA

• Uses a method to detect if the

media is clear.
• Does not detect collisions but
attempts to avoid them by
waiting before transmitting.
 Note: Ethernet LANs using
switches do not use a contention-
based system because the switch
and the host NIC operate in full-
duplex mode.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 50
Data Link Frame
The Frame
 Each frame type has three
basic parts:
• Header
• Data
• Trailer
 Structure of the frame and the
fields contained in the header
and trailer depend on Layer 3
protocol.

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 51
Data Link Frame
Frame Fields
 Frame start and stop indicator
flags - Identifies the beginning
and end limits of the frame.
 Addressing - Indicates the source
and destination nodes.
 Type - Identifies the Layer 3
protocol in the data field.
 Control - Identifies special flow
control services such as QoS.
 Data - Contains the frame payload
(i.e., packet header, segment
header, and the data).

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 52
Data Link Frame
Layer 2 Addresses

Each data link frame contains the source data link address of the NIC card sending the frame,
and the destination data link address of the NIC card receiving the frame.
© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 53
Data Link Frame
LAN and WAN Frames

 Layer 2 protocol used for a

topology is determined by the
technology.
 Data link layer protocols include:
• Ethernet
• 802.11 Wireless
• Point-to-Point Protocol (PPP)
• HDLC
• Frame Relay

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 54
4.5 Chapter Summary

© 2016 Cisco and/or its affiliates. All rights reserved. Cisco Confidential 55