Scribd
Upload
138 views12 pages

Mechanism Design and Synthesis

This chapter discusses mechanism design and synthesis. Synthesis is the process of designing a mechanism to produce a desired output motion given an input motion. Time ratio is introduced as a measure of how quickly a mechanism returns compared to its working stroke. Slider-crank and crank-rocker mechanisms are examined. For slider-crank mechanisms, the lengths of links can be determined to achieve a desired stroke. For crank-rocker mechanisms, transmission angle is important to reduce forces and bending in the links. Mechanisms are also designed to move a link between specified positions, with two positions requiring a single pivot or 4-bar coupler, and three positions only possible with a 4-bar coupler.

Uploaded by

AhmadShairadzi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
138 views12 pages

Mechanism Design and Synthesis

This chapter discusses mechanism design and synthesis. Synthesis is the process of designing a mechanism to produce a desired output motion given an input motion. Time ratio is introduced as a measure of how quickly a mechanism returns compared to its working stroke. Slider-crank and crank-rocker mechanisms are examined. For slider-crank mechanisms, the lengths of links can be determined to achieve a desired stroke. For crank-rocker mechanisms, transmission angle is important to reduce forces and bending in the links. Mechanisms are also designed to move a link between specified positions, with two positions requiring a single pivot or 4-bar coupler, and three positions only possible with a 4-bar coupler.

Uploaded by

AhmadShairadzi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 12

CHAPTER 4

MECHANISM
DESIGN

Rekanbentuk Berbantu Komputer 1


OBJECTIVES:

Rekanbentuk Berbantu Komputer 2


Introduction
From chapter 2: Displacement analysis, we study on
the analysis of existing mechanism, where to
determine the displacement of a specific mechanism.

In this chapter, the design of a mechanism presents


the opposite task; that is, given a desired motion, a
mechanism must be determined. This process is
called ‘Synthesis’

Synthesis is term given to describe the process of


designing a mechanism that produces a desired
output motion for a given input motion.
Rekanbentuk Berbantu Komputer 3
TIME RATIO
Many mechanism that produce reciprocating motion (such as an
engine mechanism and windshield wiper) are design to produce
symmetrical motion, that is, the outward stroke are identical to inward
stroke. These mechanism often do work in both directions.
However, some machines are design to require a difference in the
average speed of the forward and return stroke, such as cutting
machine and package-moving device. These mechanism typically
work only on the forward stroke.

The return stroke must be fast as possible, so maximum time is


available for working stroke.
A measure of the quick –return action of a mechanism is the time ratio
is define as:

Relation to imbalance angle  :

or

Rekanbentuk Berbantu Komputer 4


DESIGN OF SLIDER-CRANK MECHANISM
1. IN-LINE CRANK SLIDER MECHANISM

This type of mechanism is a balanced linkage, because the motion of


the crank and connecting rod is symmetry about the sliding axis.

The design of an in-line slider-crank mechanism involves determining


the length of L2 and L3 to achieve the desire stroke, (R4)max.

The length of L3 does not affect the


stroke, but shorter greater velocity

Rekanbentuk Berbantu Komputer 5


From the data, clearly show that the L3 length should
be made as large as possible.

The L3 should be at least 3 times greater than L2

Rekanbentuk Berbantu Komputer 6


2. OFFSET CRANK SLIDER MECHANISM

1. Locate the sliding axis (point C)


2. Draw the extreme positions
3. Construct a line through these two
extreme positions.
4. The intersection between these two
line is a pivot point of the crank.

Rekanbentuk Berbantu Komputer 7


2. OFFSET CRANK SLIDER MECHANISM

Because the intersection of line M and N is arbitrary chosen,


therefore an infinite number of suitable mechanism can be designed
to achieve the desired maximum slider displacement.

However, the mechanism that produce the longest connecting arm


have lower accelerations, and subsequently lower inertial forces .

Rekanbentuk Berbantu Komputer 8


DESIGN OF CRANK-ROCKER MECHANISM

Rekanbentuk Berbantu Komputer 9


DESIGN OF CRANK-ROCKER MECHANISM

Because the intersection of line M and N is arbitrary chosen,


therefore an infinite number of suitable mechanism can be designed
to achieve the desired maximum throw angle.

However, the mechanism that produce the longest connecting arm


have lower accelerations, and subsequently lower inertial forces .

an additional measure of the ‘quality’ of 4-bar mechanism is the


transmission angle, .

when  becomes small, a large forces are required to drive the rocker
arm. For best result,  should be as close to 90o as possible during
the entire rotation of the crank. This will reduce bending in the links
and produce the most favorable force-transmission conditions.

as general, a 4-bar mechanism not be used when the  is outside the


limits of 45o and 135o . In force analysis (chapter 9), we will determine
the effect of the .

Rekanbentuk Berbantu Komputer 10


MECHANISM TO MOVE A LINK BETWEEN TWO POSITIONS

When two positions of a link are specified, this class of design


problem is called two-point synthesis.

This task can be accomplished by


1.Rotating a link about a single pivot point or
2.Coupler of a 4-bar mechansim

Rekanbentuk Berbantu Komputer 11


MECHANISM TO MOVE A LINK BETWEEN THREE POSITIONS

When three positions of a link are specified, this class of design


problem is called three-point synthesis.

This task can be accomplished only by Coupler of a 4-bar


mechanism

Rekanbentuk Berbantu Komputer 12

You might also like