Scribd
Upload
84 views11 pages

Topic - 6 - Problems On 2D Elements (Axisymmetric Elements)

The document is from SNS College of Technology's Department of Automobile Engineering. It provides information on calculating the element stiffness matrix and thermal force vector for an axisymmetric element that experiences a 150°C increase in temperature. The element properties and governing equations for the analysis are presented. Steps are shown to derive the stiffness matrix and thermal force vector for the given axisymmetric element.

Uploaded by

Rajesh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
84 views11 pages

Topic - 6 - Problems On 2D Elements (Axisymmetric Elements)

The document is from SNS College of Technology's Department of Automobile Engineering. It provides information on calculating the element stiffness matrix and thermal force vector for an axisymmetric element that experiences a 150°C increase in temperature. The element properties and governing equations for the analysis are presented. Steps are shown to derive the stiffness matrix and thermal force vector for the given axisymmetric element.

Uploaded by

Rajesh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 11

SNS COLLEGE OF TECHNOLOGY

Coimbatore-35
An Autonomous Institution

Accredited by NBA – AICTE and Accredited by NAAC – UGC with ‘A+’ Grade
Approved by AICTE, New Delhi & Affiliated to Anna University, Chennai

DEPARTMENT OF AUTOMOBILE ENGINEERING

16AU405 – Finite Element Methods and Analysis

IV YEAR / VII SEM

UNIT – 3 FORMULATION OF ELEMENT CHARACTERISTIC MATRICES

AND VECTORS FOR ELASTICITY PROBLEMS

Topic - 6 - Problems on 2D Elements (Axisymmetric Elements)


2D Element - Problem

Calculate the element stiffness matrix and the thermal force vector for the axisymmetric
element shown below. The Element experiences a 150 C increase in temperature.
Take,
α = 10 x 10-6 / 0C
E = 2 x 105 N/mm2
µ= 0.25

07/28/2021 Problems on 2D Elements (Axisymmetric Elements) /16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 2 / 11
07/28/2021 Problems on 2D Elements (Axisymmetric Elements) /16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 3 / 11
07/28/2021 Problems on 2D Elements (Axisymmetric Elements) /16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 4 / 11
07/28/2021 Problems on 2D Elements (Axisymmetric Elements) /16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 5 / 11
07/28/2021 Problems on 2D Elements (Axisymmetric Elements) /16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 6 / 11
07/28/2021 Problems on 2D Elements (Axisymmetric Elements) /16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 7 / 11
07/28/2021 Problems on 2D Elements (Axisymmetric Elements) /16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 8 / 11
07/28/2021 Problems on 2D Elements (Axisymmetric Elements) /16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 9 / 11
07/28/2021 Problems on 2D Elements (Axisymmetric Elements) /16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 10 / 11
07/28/2021 Problems on 2D Elements (Axisymmetric Elements) /16AU405 - FEMA/ Mr D Rajesh Kumar / Automobile Engg / SNSCT 11 / 11

You might also like