Scribd
Upload
37 views

Multilevel View Point of A Machine

This document describes the six levels of abstraction in a machine: 1. The digital logic level consists of digital circuits like gates and wires that implement the basic logic. 2. The control level decodes instructions and moves data through the system using either hardwired or microprogrammed control units. 3. The machine level consists of the instruction set architecture specific to a machine. 4. The assembly language level is the lowest human-readable form that gets assembled to machine language. 5. The high-level language level allows programming in languages like C and interacting through application programs. 6. The user level is where program execution and user interfaces occur.

Uploaded by

Mitu Sehgal
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
37 views

Multilevel View Point of A Machine

This document describes the six levels of abstraction in a machine: 1. The digital logic level consists of digital circuits like gates and wires that implement the basic logic. 2. The control level decodes instructions and moves data through the system using either hardwired or microprogrammed control units. 3. The machine level consists of the instruction set architecture specific to a machine. 4. The assembly language level is the lowest human-readable form that gets assembled to machine language. 5. The high-level language level allows programming in languages like C and interacting through application programs. 6. The user level is where program execution and user interfaces occur.

Uploaded by

Mitu Sehgal
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 14

Multilevel View Point of A

Machine
Level 0: Digital Logic Level
• This level is where we find digital circuits (the chips).

• Digital circuits consist of gates and wires.

• These components implement the mathematical logic of all other


levels.

• This level is where we view physical devices as just switches


(On/Off)

• Instead of viewing their physical behavior (i.e. in terms of


voltages and currents) we use two value logic i.e. 0 (off) and 1(on)
Level 1: Control Level / Microarchitecture
Level
• A control unit decodes and executes instructions
and moves data through the system.

• Control units can be micro programmed or


hardwired.

• Computer Architecture is the combination of


microarchitecture and instruction set design.
Hardwired Control
• Hardwired control units consist of hardware that directly
executes machine instructions.

• The control logic is implemented with gates, flip flops,


decoders, and other digital circuits.

• It has the advantage that it can be optimized to produce a


fast mode of operation

• Making any change is difficult


Microprogrammed Control
• Microprogramed control unit is built around a storage unit called control memory
where all control signals are stored in program like format.

• Control memory stores a set of microprograms which are designed to implement


instruction set.

• Each instruction causes a set of microprogram to be fetched.

• And its control information is extracted in a manner that resembles the fetching and
execution of program from main memory.

• Design changes can be easy by just updating the contents of the control memory.

• A microprogram is a program written in a low-level language that is implemented


by the hardware
Level 2: Machine Level
• Also known as the Instruction Set Architecture
(ISA) Level.

• Consists of instructions that are particular to


the architecture of the machine.

• Programs written in machine language need


no compilers, interpreters, or assemblers.
Instruction Set Architecture (ISA)
• The Instruction Set Architecture (ISA) is the part of the processor
that is visible to the programmer or compiler writer.

• The ISA serves as the boundary between software and hardware.

• An instruction set, or instruction set architecture (ISA), is the part


of the computer architecture related to programming, including
the native data types, instructions, registers, addressing modes,
memory architecture, interrupt and exception handling, and
external I/O.

• An ISA includes a specification of the set of opcodes, the native


commands implemented by a particular CPU design.
Example
• An operation (ADD) is a part of Instruction set stored in
a memory. It is a binary code that tells computer to
perform ADD operation.

• Control units decodes instructions from the memory.


Then issues a sequence of control signals to initiate
microoperations in internal computer registers

• For every operation code, the control issues a sequence


of microoperations needed for the hardware
implementation of the specified operation.
Level 3: System Software Level
• Controls executing processes on the system.

• Protects system resources.

• Assembly language instructions often pass through Level 3


without modification.

• Operating System software supervises other programs

• Controls execution of multiple programs

• Protects system resources. E.g. Memory and I/O devices –


Other utilities
Level 4: Assembly Language Level
• Acts upon assembly language produced from
Level 5, as well as instructions programmed
directly at this level.

• Lowest human readable form before dealing with


1s and 0s (machine language)

• Assembler converts assembly to machine


language
Level 5: High-Level Language Level
• The level with which we interact when we write programs
in languages such as C, Pascal, Lisp, and Java

• The level allows users to write their own application with


languages such as C, Java and many more

• High-level languages are easier to read, write, and maintain

• The language is translated into low level language by


compiler
Level 6: The User Level
• Program execution and user interface level.

• The level with which we are most familiar.

• Composed of application programs such as Word


Processor, Paint etc.

• The implementation of the application is hidden


completely from the user

You might also like