Scribd
Upload
62 views

Multisim Tutorial: Archana P Ahir Lecturer in Electronics Government Polytechnic Khamgaon

This document provides a tutorial on how to use the Multisim circuit simulation software. It outlines the basic steps, which include opening Multisim, creating a new schematic, placing components, connecting components with wires, changing component values, grounding the circuit, and running a simulation. The key functions covered are starting Multisim, placing components, rotating components, connecting components, changing component values, grounding circuits, and simulating completed circuits.

Uploaded by

Archana Damral
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
62 views

Multisim Tutorial: Archana P Ahir Lecturer in Electronics Government Polytechnic Khamgaon

This document provides a tutorial on how to use the Multisim circuit simulation software. It outlines the basic steps, which include opening Multisim, creating a new schematic, placing components, connecting components with wires, changing component values, grounding the circuit, and running a simulation. The key functions covered are starting Multisim, placing components, rotating components, connecting components, changing component values, grounding circuits, and simulating completed circuits.

Uploaded by

Archana Damral
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 20

MULTISIM TUTORIAL

Archana P Ahir
Lecturer in Electronics
Government Polytechnic Khamgaon
*
How to start
Click on:
Start - All Programs - National
Instruments- Circuit Design Suite Version-----
Multisim.
Component Simulation Ammeter/
Toolbar Toolbar Voltmeter
Toolbar

Toolbar
Instrument
Place Your Circuit Here
* Open/Create Schematic

A blank schematic Circuit 1 is automatically


created.
• Create New Schematic : Click on
File - New - Blank - Create
• To save the schematic :Click on
File - Save As
• To Open the existing schematic :Click on
File - Open
* Place Component
• To Place Components :Click on
Place – Component

• On the Select Component Window click on


Group to select the components needed for
the circuit.

• Click OK to place the component on the


schematic.
* Rotate Components
• To rotate the components:
• Right click on the component :
Select 90 Clockwise (Ctrl +R)
Select 90 Counter Clockwise
(Ctrl+Shift+R).
*Rotate Components
Rotate
Components
* Place Wire/Connect Components
To connect Components click on :
• Place/Wire drag and place the wire.
Components can also be connected by
clicking the mouse over the terminal edge
of one component and dragging to the
edge of another component .
Connect
/Place Wire
*Change Component Values
• To change component values :double
click on the component this brings up a
window that display the properties of the
component.
• Change the value of the component as
per requirement.
• Click on OK.
*Grounding
• All circuits must be grounded before the
circuit can be simulated.
• Click on Ground in the toolbar to ground
the circuit.
• If the circuit is not grounded Multisim will
not run the simulation.
Grounding
*Simulation
* To simulate the completed circuit
* Click on Simulate/Run or F5.
Run/Simulate
PLACE THE INSTRUMENT

Drag and drop


Instrument
here
PLACE THE INSTRUMENT

Drag and drop


Instrument
here
*THANK YOU

You might also like