Setup Windows Server 2008R2 Roles
for DHCP (Dynamic Host
Configuration Protocol)
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
1. Click Server Manager
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
1. Click Server Manager
2. Click Add Roles
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
1. Click Server Manager
2. Click Add Roles
3. Click Next
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
1. Click Server Manager
2. Click Add Roles
3. Click Next
4. Check DHCP Server
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
1. Click Server Manager
2. Click Add Roles
3. Click Next
4. Check DHCP Server
5. Click Next
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
1. Click Server Manager
2. Click Add Roles
3. Click Next
4. Check DHCP Server
5. Click Next
6. Click Next
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
1. Click Server Manager
2. Click Add Roles
3. Click Next
4. Check DHCP Server
5. Click Next
6. Click Next
7. Input 192.168.0.2 in the Preferred DNS
Server IPv4 Address
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
1. Click Server Manager
2. Click Add Roles
3. Click Next
4. Check DHCP Server
5. Click Next
6. Click Next
7. Input 192.168.0.2 in the Preferred DNS
Server IPv4 Address then click validate
button
8. Click next
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
1. Click Server Manager
2. Click Add Roles
3. Click Next
4. Check DHCP Server
5. Click Next
6. Click Next
7. Input 192.168.0.2 in the Preferred DNS
Server IPv4 Address then click validate
button
8. Click next
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
9. Click Add
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
9. Click Add
10. Type the following settings:
Scope name: Scope 1
Starting IP Address: 192.168.0.3
Ending IP Address: 192.168.0.254
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
9. Click Add
10. Type the following settings:
Scope name: Scope1
Starting IP Address: 192.168.0.3
Ending IP Address: 192.168.0.254
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
11. Click OK
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
12. Click Next
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
12. Click Next
13. Check Disable DHCPv6
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
12. Click Next
13. Check Disable DHCPv6
14. Click Next
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
12. Click Next
13. Check Disable DHCPv6
14. Click Next
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
12. Click Next
13. Check Disable DHCPv6
14. Click Next
15. Select Use Current Credentials then
click Next
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
12. Click Next
13. Check Disable DHCPv6
14. Click Next
15. Select Use Current Credentials then
click Next
16. Click Install
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
Patience Please….
Wait Until it finish installing the DHCP
roles
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
17. Click Close
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol) is DONE!.
17. Click Close
Setup Windows Server 2008R2 Roles for Roles for
DHCP (Dynamic Host Configuration Protocol)
For those would like to try again you may repeat the
steps.
God luck!...
Computer System Servicing NC II
GBSJR. COC 3 – Setup Windows Server 2008R2
Roles for Roles for DHCP (Dynamic Host
Configuration Protocol)
Find out more for the next tutorial by GBSJR
(Click the arrow when in Slide Show mode)
