Scribd
Upload
457 views18 pages

T40 Personal H2S Monitor Guidelines

The document provides instructions for operating the H2S T40 Rattler personal gas monitor. It describes how to turn the monitor on and off using the on/off button, and explains that it performs self-tests and displays gas readings when powered on. It also outlines how to zero the monitor, conduct function tests, check peak readings, change the battery, and maintenance requirements to send it for calibration every six months. In summary, the T40 Rattler is a small, easy to use, lightweight and versatile personal gas monitor.

Uploaded by

SAFEER ABDUL KHARIM
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
457 views18 pages

T40 Personal H2S Monitor Guidelines

The document provides instructions for operating the H2S T40 Rattler personal gas monitor. It describes how to turn the monitor on and off using the on/off button, and explains that it performs self-tests and displays gas readings when powered on. It also outlines how to zero the monitor, conduct function tests, check peak readings, change the battery, and maintenance requirements to send it for calibration every six months. In summary, the T40 Rattler is a small, easy to use, lightweight and versatile personal gas monitor.

Uploaded by

SAFEER ABDUL KHARIM
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 18

H2S Personal Gas Monitor

T40 Rattler Operation


The H2S T40 Rattler is
a personal gas monitor
and should NOT be
used for gas testing.

•Saudi Aramco: Company General Use


Turning the T40 On & Off

Press and hold the On/Off


button until the word
“On” appears on the
display.

On/Off Button

•Saudi Aramco: Company General Use


Turning the T40 On & Off
Gas Identifier Icon

The T40 will power up and


begin a warm up routine,
which includes testing of
the display, audible, visual
and vibrating alarms.

•Saudi Aramco: Company General Use


Turning the T40 On & Off
Gas Identifier Icon

Following this brief warm


up, the T40 enters the gas
readings mode indicated by
the four digit display and
gas identifier icon. The T40
is ready for use.

•Saudi Aramco: Company General Use


Turning the T40 On & Off

To turn the T40 off,


simply press and hold the
On/Off button for 5
seconds.

On/Off Button

•Saudi Aramco: Company General Use


High/Low Alarms

Low Alarm: 10ppm


High Alarm: 20ppm

•Saudi Aramco: Company General Use


Service of T40

Each T40 must be sent to Zaff


International for calibration and
routine maintenance once every
six months.

•Saudi Aramco: Company General Use


Function Testing the T40

• Conduct function tests daily Sensor

• Using the same function test gas


cylinder used for the LTX310 &
TMX412, squeeze the trigger on
the cylinder, point the outlet at the
sensor and wait for the response.
• As soon as the low alarm of 10
PPM sounds, the function test is
complete.

•Saudi Aramco: Company General Use


Zeroing the T40
Calibration Adaptor

• To prepare the T40 for


zeroing, flip the calibration
adaptor to the opposite side
of the monitor. The T40 will
begin beeping indicating it is
now ready for zeroing.

•Saudi Aramco: Company General Use


Zeroing the T40

• To Zero the T40, press the


On/Off and Mode buttons
simultaneously. The T40 will
automatically zero and beep
after approximately 10
seconds. Flip the calibration
adaptor back to its original
position and the T40 will return
to the normal operating mode.
Mode Button

On/Off Button
•Saudi Aramco: Company General Use
Zeroing the T40

ALWAYS ZERO
THE T40 IN CLEAN AIR !

•Saudi Aramco: Company General Use


Peak Reading

• To check the peak reading


after the T40 alarms, push
the mode button one time
and the peak reading will be
displayed.

Mode Button

•Saudi Aramco: Company General Use


Peak Reading

• To clear the peak reading,


push the mode button once
to see the peak reading and
then push the On/Off button
to clear the peak reading.

Mode Button
On/Off Button

•Saudi Aramco: Company General Use


Changing the Battery
On/Off Button

• Remove the battery cover from


the bottom left of the T40 with
the Hex head plastic tool
provided with the instrument
and the “AA” battery will
easily slip out.
Battery Cover

Battery Cover Removal Tool


•Saudi Aramco: Company General Use
Changing the Battery
On/Off Button

• Replace the old “AA” battery


with a new one and put the
battery cover back in place.
• Turn the instrument back on
with the On/Off button.
Battery Cover

•Saudi Aramco: Company General Use


T40 Rattler Review

• Two button keypad for all controls


• One button turn on
• Five second turn off
• 600 hours run-time on 1 “AA” battery
• “Flip top” zeroing/ system

•Saudi Aramco: Company General Use


In summary, T40 Rattler is…

• Small
• Easy to use
• Lightweight
• Versatile
• Tested
• Rugged

•Saudi Aramco: Company General Use

You might also like