Scribd
Upload
207 views10 pages

Part Iii - Iec 60567

The document discusses guidelines for sampling gases and oil from electrical equipment for analysis of free and dissolved gases. It describes that receiving a qualitative and representative sample is crucial for a reliable diagnosis. There are two common methods for sampling oil - using a syringe or bottle. It also discusses two methods for sampling free gases - using a syringe or vacuum. Gas chromatography is mentioned as a technique used for analysis that can detect both thermal conductivity and flame ionization.

Uploaded by

သူ ရိန်
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
207 views10 pages

Part Iii - Iec 60567

The document discusses guidelines for sampling gases and oil from electrical equipment for analysis of free and dissolved gases. It describes that receiving a qualitative and representative sample is crucial for a reliable diagnosis. There are two common methods for sampling oil - using a syringe or bottle. It also discusses two methods for sampling free gases - using a syringe or vacuum. Gas chromatography is mentioned as a technique used for analysis that can detect both thermal conductivity and flame ionization.

Uploaded by

သူ ရိန်
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 10

IEC 60567

Sampling of gasses and oil for analysis of free and dissolved gases
Oil filled electrical equipment -
Sampling of gasses and oil for analysis
of free and dissolved gases - Guidance

JMPS J.M.PANG & SEAH (PTE) LTD IEC 60567 - 1


Sampling Of Oil From Oil-Filled
Equipment

It is important to bear in mind that receiving a


qualitative and a representative sample in crucial for
obtaining a reliable diagnosis of the electrical
equipment. Even the most sophisticated extraction or
diagnosis methods cannot overcome faulty samples.

JMPS J.M.PANG & SEAH (PTE) LTD IEC 60567 - 2


Sampling Of Oil From Oil-Filled
Equipment

Precautions should be taken to deal with any sudden


release of oil and avoid oil spillage when sampling oil.
There are two common methods of sampling of the oil:
• By syringe
• By bottle

JMPS J.M.PANG & SEAH (PTE) LTD IEC 60567 - 3


Sampling Of Free Gases By Syringe

Figure 1 – Sampling of gas by syringe

JMPS J.M.PANG & SEAH (PTE) LTD IEC 60567 - 4


Sampling Of Free Gases By Vacuum

Figure 2 – Sampling of free gases by vacuum

JMPS J.M.PANG & SEAH (PTE) LTD IEC 60567 - 5


Method 1: Sampling By Syringe

Figure 3 – Sampling of oil by syringe


JMPS J.M.PANG & SEAH (PTE) LTD IEC 60567 - 6
Method 2: Sampling By Bottles

Figure 4 – Sampling of oil bottles

JMPS J.M.PANG & SEAH (PTE) LTD IEC 60567 - 7


Gas Chromatography

or

JMPS J.M.PANG & SEAH (PTE) LTD IEC 60567 - 8


Gas Chromatography
A gas chromatograph uses two detection methods.

detects

detects

JMPS J.M.PANG & SEAH (PTE) LTD IEC 60567 - 9

You might also like